Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

D41FType a manual adjusting PTFE seal butterfly valvePN6~PN10

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
D41f manual adjustment type PTFE seal butterfly valve pn6 ~ PN10 is suitable for the transportation of liquid and gas (including steam) in various types of industrial pipelines, especially in the use of severe corrosive media, such as sulfuric acid, hydrofluoric acid, phosphoric acid, chlorine, strong alkali, aqua regia and other strong corrosive media.
Product Details
Product description

D41f manual adjustment type PTFE seal butterfly valve pn6 ~ PN10 is suitable for the transportation of liquid and gas (including steam) in various types of industrial pipelines, especially in the use of severe corrosive media, such as sulfuric acid, hydrofluoric acid, phosphoric acid, chlorine, strong alkali, aqua regia and other strong corrosive media.

Connection size

Connecting dimensions of external structure of d41f manual adjusting type PTFE seal butterfly valve pn6 ~ PN10

DN
(mm)

NPS
(inch)

L

D

D1D2FBN-φDWD0HWT(kg)
PN0.6MPa
401 1/2106130100803164-φ14160 14010
502108140110903164-φ14200 16012
652 1/21121601301103164-φ14250 16013
8031141851501253184-φ18250 17014
10041272051701453184-φ18300 18016
12551402352001753208-φ18300 27518
15061402602252003208-φ18 20029538
20081523152802553228-φ18 20032074
2501025037033531032412-φ18 240385105
3001227043537536242412-φ23 240390142
3501429048544541242612-φ23 240460179
4001631053549546242816-φ23 280510220
4501833059055051842816-φ23 280540268
5002035064060056843016-φ23 320570378
6002439075570567053020-φ25 320660608
7002843086081077553224-φ25 3607101050
8003247097592088053424-φ30 3607801320
900365101075102098053624-φ30 3808851795
10004055011751120108053628-φ30 400990 
PN1.0MPa
401 1/2106145110853184-φ18160 14010
5021081601251003204-φ18200 16012
652 1/21121801451203204-φ18250 16514
8031141951601353224-φ18250 17016
10041272151801553228-φ18300 18018
12551402452101853248-φ18300 27520
15061402802402103248-φ23 20029538
20081523352952653268-φ23 20032074
2501025039035032032812-φ23 240385105
3001227044040036842812-φ23 240390142
3501429050046042843016-φ23 240460179
4001631056551548243216-φ25 280510220
4501833061556553243220-φ25 280540268
5002035038062058543420-φ25 320570378
6002439078072568553620-φ30 320660608
7002843089584080054020-φ30 3607101050
80032470101095090554424-φ34 3607801320
9003651011101050100554628-φ34 3808851795
10004055012201160111555028-φ34 4009901900

 

Connection size

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. If the configuration of driving device is electric or pneumatic, please refer to the manual of supporting drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.