SD941-16The type-1 electric telescopic butterfly valve is applicable to the water supply and drainage and gas pipelines of food, medicine, chemical industry, petroleum, electric power, light textile, papermaking and other water supply and drainage and gas pipelines with the temperature ≤ 80 ℃ and the nominal pressure ≤ 1.6Mpa. It has the function of compensating the thermal expansion and cold contraction of the pipeline.
Product overview
SD941-16The type-1 electric telescopic butterfly valve is applicable to the water supply and drainage and gas pipelines of food, medicine, chemical industry, petroleum, electric power, light textile, papermaking and other water supply and drainage and gas pipelines with the temperature ≤ 80 ℃ and the nominal pressure ≤ 1.6Mpa. It has the function of compensating the thermal expansion and cold contraction of the pipeline.
Product features
1. The design is novel, reasonable, unique in structure, light in weight, convenient in operation and quick in opening and closing;
2. The telescopic butterfly valve can not only adjust and cut off the flow, but also compensate for the expansion and cold contraction caused by the temperature difference of the pipeline, but also provide convenience for the installation, replacement and maintenance of the valve.
3. The sealing parts can be adjusted and replaced, and the sealing performance is reliable.
Parts material
SD941-16Main parts and components materials of type-A electric telescopic butterfly valve| name | Material Science |
|---|
| valve body | WCB、ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti、HT250 |
| Valve plate | WCB、ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti、HT250 |
| Stem | 1Cr18Ni9Ti、1Cr18Ni12Mo2Ti、2Cr13 |
| seal ring | CR、NBR、EPDM、FPM |
| filler | NBR、Flexible graphite, V-type rubber |
Standards adopted
Design standards: GB / t12238-1989; JB / t8527-1997;
Flange connection size:
GB/T9113.1-2000;GB/T9113.2-2000;
GB/T9115.1-2000;GB/T9115.2-2000;
Structural length: GB / t12221-1989;
Pressure test: GB / t13927-1992; JB / t9092-1999;
Actuator parameters
1. Power supply: the motor is three-phase AC, 380V (special order 660V, 440V or 220 V), 50 Hz (special order 60 Hz); control line voltage is 220 V / 50 Hz (special order 60 Hz); remote control voltage is 24 VDC.
2. Ambient temperature: - 20 - + 60 ℃ (special order - 60 - + 80 ℃);
3. Relative temperature: ≤ 90% (at 25 ℃);
4. Ordinary type and outdoor type are used in places without inflammable / explosive and corrosive medium; explosion-proof products are D Ⅰ and D Ⅱ BT4, D Ⅰ is suitable for non excavation working face of coal mine; D Ⅱ BT4 is used in factory, which is suitable for explosive gas mixture of class Ⅱ A and Ⅱ B T1-T4;
5. Protection grade: IP55 for outdoor type and explosion-proof type (IP67 can be customized);
6. Working system: short time 10 minutes (30 minutes can be customized);
technical parameter
SD941-16Main technical parameters of type a electric telescopic butterfly valve
| Nominal diameter | DN(mm) | 50~2000 |
|---|
| Nominal pressure | PN(MPa) | 0.6 | 1.0 | 1.6 |
| Test pressure | strength test | 0.9 | 1.5 | 2.4 |
| Sealing test | 0.66 | 1.1 | 1.76 |
| Airtight seal test | 0.6 | 0.6 | 0.6 |
| Applicable temperature | ≤80℃ |
| Applicable temperature | Air, water, steam, gas, oil, etc. |
| Driving form | Manual, worm gear drive, pneumatic drive, electric drive. |
Connection size
SD941-16Connection dimension of external structure of type-1 electric telescopic butterfly valve(mm)| Diameter(DN) | L | LMAX | LMIN | D1 | D | Z-Φd | H | H0 | A | B | D0 | Wt/kg |
|---|
| 50 | 150 | 163 | 138 | 125 | 165 | 4-18 | 82.5 | 445 | 125 | 125 | 80 | 61 |
| 65 | 170 | 188 | 152 | 145 | 185 | 4-18 | 92.5 | 465 | 125 | 125 | 80 | 74 |
| 80 | 180 | 192 | 162 | 160 | 200 | 8-18 | 100 | 480 | 125 | 125 | 80 | 88 |
| 100 | 190 | 225 | 180 | 180 | 220 | 8-18 | 110 | 505 | 125 | 125 | 80 | 100 |
| 125 | 200 | 235 | 190 | 210 | 250 | 8-18 | 125 | 700 | 325 | 245 | 150 | 120 |
| 150 | 210 | 240 | 195 | 240 | 285 | 8-22 | 142.5 | 735 | 325 | 245 | 150 | 125 |
| 200 | 230 | 265 | 215 | 295 | 340 | 8-22 | 170 | 805 | 325 | 245 | 150 | 180 |
| 250 | 250 | 285 | 235 | 350 | 395 | 12-22 | 197.5 | 890 | 363 | 313 | 200 | 205 |
| 300 | 270 | 302 | 252 | 400 | 445 | 12-22 | 222.5 | 950 | 363 | 313 | 200 | 260 |
| 350 | 290 | 321 | 271 | 460 | 505 | 16-22 | 252.5 | 1020 | 363 | 313 | 250 | 420 |
| 400 | 310 | 343 | 283 | 515 | 565 | 16-26 | 282.5 | 1105 | 363 | 313 | 250 | 520 |
| 450 | 330 | 360 | 300 | 565 | 615 | 20-26 | 307.5 | 1287 | 465 | 439 | 300 | 660 |
| 500 | 350 | 380 | 320 | 620 | 670 | 20-26 | 335 | 1185 | 546 | 431 | 360 | 700 |
| 600 | 390 | 425 | 365 | 725 | 780 | 20-30 | 390 | 1330 | 546 | 556 | 360 | 1020 |
| 700 | 430 | 465 | 395 | 840 | 895 | 24-30 | 447.5 | 1435 | 546 | 556 | 360 | 1140 |
| 800 | 470 | 510 | 430 | 950 | 1015 | 24-33 | 507.5 | 1545 | 546 | 556 | 360 | 1380 |
| 900 | 510 | 560 | 460 | 1050 | 1115 | 28-33 | 557.5 | 1800 | 617 | 617 | 360 | 2100 |
| 1000 | 550 | 600 | 500 | 1160 | 1230 | 28-36 | 615 | 2365 | 632 | 632 | 360 | 2520 |
| 1200 | 630 | 680 | 580 | 1380 | 1455 | 32-39 | 727.5 | 2585 | 632 | 632 | 360 | 3100 |
Note: 1. The sealing test pressure of the above butterfly valves is 1.0MPa for dn50-dn800, 0.6MPa for dn900-dn1000, and 0.25MPa for dn200-dn2000.
2. If the working pressure exceeds 1.0MPa, triple eccentric butterfly valve is recommended.
3. The connection dimensions of the above butterfly valves shall be manufactured according to the standard of 1.0MPa; in case of special needs, it shall be indicated when ordering.
matters needing attention
1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. Please refer to the manual for electric drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.