Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

D941W-0.5CElectric ventilation flange butterfly valve

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
D941W-0.5CThe electric ventilation flange butterfly valve is suitable for two position cutting off. The valve is directly connected to the actuator. The electric actuator can be controlled by inputting 220 VAC power without servo amplifier.
Product Details
Product overview

D941W-0.5CThe electric ventilation flange butterfly valve is suitable for two position cutting off. The valve is directly connected to the actuator. The electric actuator can be controlled by inputting 220 VAC power without servo amplifier. Butterfly valve is made of steel plate welding, which has the characteristics of short structure size, light weight and convenient installation. The valve has small driving torque, flexible opening and closing, and convenient operation. The valve body of the electric ventilation butterfly valve is provided with an oil sealing ring, so there is no visible gap between the sealing pairs and the leakage rate is small. The expansion gap between butterfly plate and valve body is large, which can effectively prevent the jamming caused by heat expansion and cold contraction. The valve can be equipped with a variety of driving devices, such as manual device, worm gear transmission device, pneumatic device, electric device. Ventilation butterfly valve is widely used in metallurgy, petrochemical, electric power, building materials, mining and other industrial pipelines, to control or regulate medium gas.

Parts material
D941W-0.5CMaterial of main parts of electric ventilation flange butterfly valve
Part namevalve bodyValve plateValve shaft
Material Sciencecarbon steelcarbon steelCarbon steel, stainless steel
Connection size
D941W-0.5CMain external connection dimensions of electric ventilation flange butterfly valve(mm)
Nominal diameterDN5065801001251502002503003504004505006007008009001000
L9090100115130140150250270290310330350390430470500550
H2637083105115137164206230248289320343413478525585640
H15305305656006407057759451070114012101335141516051844204022552388
D140160190210240265320375440490540595645755860975107551175
D111013015017020022528033539544549555060070581092010201120
n-φd4-144-144-184-188-188-1812-1812-2212-2216-2216-2220-2220-2624-2624-3024-3024-3028-30

 

matters needing attention

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. Please refer to the manual for electric drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.