D671F、D671XPneumatic double clip type soft seal butterfly valve pn6 ~ PN25 can be divided into pneumatic clamp soft seal butterfly valve and pneumatic hard seal butterfly valve. Parts of different materials can be selected for valve body, and sealing rings of different materials can be used for cutting off medium and regulating medium flow.
Product overview
D671F、D671XPneumatic double clip type soft seal butterfly valve pn6 ~ PN25 can be divided into pneumatic clamp soft seal butterfly valve and pneumatic hard seal butterfly valve. Parts of different materials can be selected for valve body, and sealing rings of different materials can be used for cutting off medium and regulating medium flow. The pneumatic double clip butterfly valve is suitable for water supply and drainage, sewage, food, heating, gas, ship, hydropower, metallurgy, energy system and light and textile industries. It is especially suitable for bidirectional sealing and valve body corrosion prone occasions as flow regulation and closure medium.
performance parameter
D671F、D671XMain performance parameters of pneumatic double clip type soft seal butterfly valve pn6 ~ PN25| Nominal diameterDN(mm) | 50~1200 |
|---|
| Nominal pressure | PN0.6、1.0、1.6、2.5MPa |
| Connection form | Clip on type |
| Valve plate type | Vertical plate |
| Flow characteristics | |
| Range of motion | 0~90° |
| Amount of leakage | According to GB / t4213-92, it is 10-4 of Kv value, soft seal: zero leakage |
| Basic error | With positioner: less than full stroke±2%% |
| Return difference | With positioner: less than full stroke±2% |
| Return difference configuration actuator | GT、AT、AWSeries single double acting pneumatic actuator |
| control mode | Switch type (switch two position control), regulating type (4 ~ 20mA control) |
Performance specifications
D671F、D671XMain performance specification of pneumatic double clip type soft seal butterfly valve pn6 ~ PN25| Nominal diameterDN(mm) | DN50~1200 |
|---|
| Nominal pressure | PN(MPa) | 0.6 | 1.0 | 1.6 | 2.5 |
| Test pressure | strength test | 0.9 | 1.5 | 2.4 | 3.75 |
| Sealing test | 0.66 | 1.1 | 1.76 | 2.75 |
| Low pressure air tightness test | 0.5~0.7 |
| Applicable media | Water, oil, steam, nitric acid (temperature ≤ 200 ℃), acetic acid (temperature ≤ 200 ℃) |
Connection size
D671F、D671XMain connection dimensions of pneumatic double clip type soft seal butterfly valve pn6 ~ PN25(mm)| Nominal diameter(DN) | Main dimensions | Flange size |
|---|
| D673H/F | D671F/X | A | H1 | 1.0MPa | 1.6MPa | 2.5MPa |
|---|
| L | H | L | H | K | n-Фd | K | n-Фd | K | n-Фd |
|---|
| 50 | 43 | 112 | 43 | 63 | 180 | 315 | 125 | 4-18 | 125 | 4-18 | 125 | 4-18 |
| 65 | 46 | 115 | 46 | 70 | 180 | 330 | 145 | 4-18 | 145 | 4-18 | 145 | 8-18 |
| 80 | 46 | 120 | 46 | 83 | 245 | 390 | 160 | 4-18 | 160 | 8-18 | 160 | 8-18 |
| 100 | 52 | 138 | 52 | 105 | 240 | 431 | 180 | 8-18 | 180 | 8-18 | 190 | 8-22 |
| 125 | 56 | 164 | 56 | 115 | 240 | 455 | 210 | 8-18 | 210 | 8-18 | 220 | 8-26 |
| 150 | 56 | 175 | 56 | 137 | 350 | 626 | 240 | 8-22 | 240 | 8-22 | 250 | 8-26 |
| 200 | 60 | 200 | 60 | 164 | 350 | 720 | 295 | 8-22 | 295 | 12-22 | 310 | 12-26 |
| 250 | 68 | 243 | 68 | 206 | 550 | 800 | 350 | 12-22 | 355 | 12-26 | 370 | 12-30 |
| 300 | 78 | 250 | 78 | 230 | 600 | 860 | 400 | 12-22 | 410 | 12-26 | 430 | 16-30 |
| 350 | 78 | 280 | 78 | 248 | 600 | 883 | 460 | 16-22 | 470 | 12-26 | 490 | 16-33 |
| 400 | 102 | 305 | 102 | 289 | 600 | 972 | 515 | 16-26 | 525 | 16-26 | 550 | 16-36 |
| 450 | 114 | 350 | 114 | 320 | 750 | 1043 | 565 | 20-26 | 585 | 16-30 | 600 | 20-36 |
| 500 | 127 | 380 | 127 | 343 | 750 | 1098 | 620 | 20-26 | 650 | 20-30 | 660 | 20-36 |
| 600 | 154 | 445 | 154 | 413 | 750 | 1236 | 725 | 20-30 | 770 | 20-33 | 770 | 20-39 |
| 700 | 165 | 480 | 165 | 478 | 750 | 1431 | 840 | 24-30 | 840 | 24-36 | 875 | 24-42 |
| 800 | 190 | 530 | 190 | 525 | 750 | 1488 | 950 | 24-33 | 950 | 24-39 | 990 | 24-48 |
| 900 | 203 | 580 | 203 | 585 | 1250 | 1615 | 1050 | 28-33 | 1050 | 28-39 | 1090 | 28-48 |
| 1000 | 216 | 650 | 216 | 640 | 1500 | 1765 | 1160 | 28-36 | 1170 | 28-42 | 1210 | 28-56 |
| 1200 | 254 | 760 | 254 | 755 | 1500 | 1976 | 1380 | 32-39 | 1390 | 32-48 | 1420 | 32-56 |
matters needing attention
1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. Please refer to the manual for electric drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.