Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

D641HPneumatic flange type hard seal butterfly valvePN16~PN40

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
D641HPneumatic flange type hard seal butterfly valve series products are long life, energy-saving butterfly valve. Its structure adopts the three-dimensional eccentric design principle, and the new processing technology of elastic seal and hard soft multi-layer seal is compatible, which can reduce the torque force of butterfly valve during operation, and achieve the function of labor saving and energy saving. So as to ensure the overall reliability of corrosion resistance, high temperature resistance and corrosion ......
Product Details
Product overview

D641HPneumatic flange type hard seal butterfly valve series products are long life, energy-saving butterfly valve. Its structure adopts the three-dimensional eccentric design principle, and the new processing technology of elastic seal and hard soft multi-layer seal is compatible, which can reduce the torque force of butterfly valve during operation, and achieve the function of labor saving and energy saving. So as to ensure the overall reliability of corrosion resistance, high temperature resistance and corrosion resistance. It is suitable for regulating flow and cutting off fluid in food, medicine, petrochemical, power plant, steel plant, industrial environmental protection water treatment, high-rise building, water supply and drainage pipeline.

performance parameter

D641HMain performance parameters of pneumatic flange type hard seal butterfly valve PN16 ~ PN40

Nominal diameterDN(mm)50-1200
Nominal pressurePN(MPa)1.01.62.5
Nominal pressure
(MPa)
strength test1.52.43.75
Sealing test1.11.762.75
Material / material codeCPR
Main partsvalve bodyWCBZG1Cr18Ni9TiZG0Cr18Ni12Mo2Ti
DiscWCBZG1Cr18Ni9TiZG0Cr18Ni12Mo2Ti
Stem2Cr131Cr18Ni9Ti0Cr18Ni12Mo2Ti
seal ringstainless steel
fillerPolytetrafluoroethylene, flexible graphite
Applicable conditionsApplicable mediaWater, steam and oilNitric acidAcetic acid
Applicable temperature-40℃~200℃
ActuatormodelGT or AW series
Air source pressure0.3-0.7MPa
Executive StandardsDesign and manufactureStructural lengthFlange sizePressure temperatureTest and inspection
GBT/12238GB12221GB9113GB9131GB13927

Connection size

D641HMain connection dimensions of pneumatic flange type hard seal butterfly valve PN16 ~ PN40(mm)
Nominal diameter
DN(mm)
size(mm)Actuator model
(for reference only)
LHD(1.6)D(2.5)D(4.0)D1(1.6)D1(2.5)D1(4.0)n-d(1.6)n-d(2.5)n-d(4.0)
501081121651651651251251254-184-184-18GTD-65
651121151851851851451451454-188-188-18GTD-80
801141202002002001601601608-188-188-18GTD-80
1001271382202352351801901908-188-228-22GTD-100
1251401642502702702102202208-188-268-26GTD-115
1501401752853003002402502508-228-268-26GTD-125
20015220034036037529531032012-2212-2612-30GTD-160
25016524340542545035537038512-2612-3012-33GTD-190
30017825046048551541043045012-2616-3016-33AW13
35019028052055558047049051016-2616-3316-36AW17
40021630558062066052555058516-3016-3616-39AW17
45022235064067068558560061020-3020-3620-39AW20
50022938071573075565066067020-3320-3020-42AW20
600267445840845 770770 20-3620-39 AW28
700292480910960 840875 24-3624-42 AW35
80031853010251085 950990 24-3924-48 AW35
90033058011251185 10501090 28-3928-48 AW40
100041065012551320 11701210 28-4228-56 AW40
120047076014851530 13901420 32-4832-56 AW40

 

matters needing attention

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. Please refer to the manual for electric drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.