Valve seat sealing surface material is PTFE, reinforced PTFE plastic (q341f), metal surfacing cobalt base (q341y), nominal pressure PN16 ~ PN40, valve body material is WCB, CF8, CF8M ball valve, widely used in all walks of life.
Product description
Q341Y、Q341FType PN16 ~ PN40 manual worm gear ball valve PN16 ~ PN40 is worm gear transmission, flange connection, floating ball straight through structure, valve seat sealing surface material is PTFE, reinforced PTFE plastic (q341f), metal surfacing cobalt base (q341y), nominal pressure PN16 ~ PN40, valve body material is WCB, CF8, CF8M ball valve, widely used in all walks of life.
性能参数
Q341Y、Q341FPerformance parameters of type PN16 ~ PN40 manual worm gear ball valve
| model | PN | working pressure /MPa | Applicable temperature /℃ | Applicable media |
|---|
| Q341F-16C | 16 | 1.6 | ≤180 | Water, gas and oil |
| Q341F-25 | 25 | 2.5 |
| Q341F-40 | 40 | 4.0 |
| Q341Y-16C | 16 | 1.6 | ≤425 | Granular media in water, gas and oil |
| Q341Y-25 | 25 | 2.5 |
| Q341Y-40 | 40 | 4.0 |
| Q341F-16P | 16 | 1.6 | ≤180 | Nitric acid |
| Q341F-25P | 25 | 2.5 |
| Q341F-40P | 40 | 4.0 |
| Q341Y-16P | 16 | 1.6 | ≤450 | Granular media in water, gas and oil |
| Q341Y-25P | 25 | 2.5 |
| Q341Y-40P | 40 | 4.0 |
| Q341F-16R | 16 | 1.6 | ≤180 | Nitric acid |
| Q341F-25R | 25 | 2.5 |
| Q341F-40R | 40 | 4.0 |
| Q341Y-16R | 16 | 1.6 | ≤450 | Granular media in water, gas and oil |
| Q341Y-25R | 25 | 2.5 |
| Q341Y-40R | 40 | 4.0 |
零件材料
Q341Y、Q341F Type pn16-pn40 manual worm gear ball valve parts material| model | Material Science |
|---|
| valve body | Stem | Sealing surface | filler |
|---|
| Q341F-16C | WCB | 2Cr13 304 316 1Cr18Ni9Ti 1Cr18Ni12Mo2Ti | PTFE、enhance PTFE | PTFE |
| Q341F-25 |
| Q341F-40 |
| Q341Y-16C | Cobalt base metal surfacing | Flexible graphite |
| Q341Y-25 |
| Q341Y-40 |
| Q341F-16P | CF8 | 304 | PTFE、enhance PTFE | PTFE |
| Q341F-25P |
| Q341F-40P |
| Q341Y-16P | Cobalt base metal surfacing | |
| Q341Y-25P |
| Q341Y-40P |
| Q341F-16R | CF8M | 316 | PTFE、enhance PTFE | PTFE |
| Q341F-25R |
| Q341F-40R |
| Q341Y-16R | Cobalt base metal surfacing | Flexible graphite |
| Q341Y-25R |
| Q341Y-40R |
structure size
Q341Y、Q341F Shape and structure dimension of PN25 manual worm gear ball valve(mm)| DN | L | D | H | 重量/kg |
|---|
| 125 | 320 | 245 | 542 | 110 |
| 150 | 360 | 280 | 572 | 130 |
| 200 | 457 | 335 | 638 | 200 |
| 250 | 533 | 405 | 828 | 245 |
| 300 | 610 | 460 | 948 | 500 |
Q341Y、Q341F Shape and structure dimension of PN25 manual worm gear ball valve(mm)| DN | L | D | H | weight/kg |
|---|
| 100 | 305 | 230 | 528 | 90 |
| 125 | 381 | 270 | 547 | 130 |
| 150 | 403 | 300 | 592 | 170 |
| 200 | 419 | 360 | 791 | 250 |
| 250 | 568 | 425 | 926 | 385 |
| 300 | 648 | 485 | 948 | 625 |
Q341Y、Q341F Shape and structure dimension of PN40 manual worm gear ball valve(mm)| DN | L | D | H | weight/kg |
|---|
| 100 | 305 | 230 | 528 | 95 |
| 125 | 381 | 270 | 547 | 135 |
| 150 | 403 | 300 | 592 | 175 |
| 200 | 419 | 375 | 791 | 265 |
| 250 | 568 | 445 | 926 | 524 |
| 300 | 648 | 510 | 948 | 665 |
matters needing attention
1. Be careful in installation and construction, and do not hit the valve.
2. Before installation, the ball valve should be inspected to check the specification and model, and identify whether there is damage, especially for the valve stem. Also turn a few times to see if it is skewed, because during transportation, it is easy to bump the stem. Also remove the debris in the valve.
3. When lifting the ball valve, the rope should not be tied to the hand wheel or the valve stem to avoid damage to these parts, but should be tied to the valve body.
4. The pipeline connected to the ball valve must be cleaned. Compressed air can be used to blow away iron oxide chips, mud and sand, welding slag and other impurities. These debris, not only easy to scratch the sealing surface of the ball valve, in which large particles of debris (such as welding slag), but also block the small valve, so that its failure.
5. The position of valve handle rotation should be reserved during installation. 6. The ball valve cannot be used as throttling. 7. The ball valve with transmission mechanism shall be installed vertically.