Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

ZAJTQElectric cut off three way ball valve

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ball Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
ZAJTQElectric cut-off three-way ball valve is composed of Chr series intelligent electric actuator and three-way ball valve. It is a kind of rotary cut-off regulating valve. It has the advantages of tight closing, compact structure, light weight and convenient maintenance. It is widely used in pipeline automation control of gas, liquid, steam, oil and other corrosive media.
Product Details
Product overview

ZAJTQElectric cut-off three-way ball valve is composed of Chr series intelligent electric actuator and three-way ball valve. It is a kind of rotary cut-off regulating valve. It has the advantages of tight closing, compact structure, light weight and convenient maintenance. It is widely used in pipeline automation control of gas, liquid, steam, oil and other corrosive media. The three-way ball valve with two valve seats has the advantages of compact structure, beautiful appearance and good sealing performance. It can switch the flow direction of medium in the pipeline. It can also make two mutually perpendicular channels connected or closed. The four seat sealing three-way ball valve has beautiful appearance and compact and reasonable structure. It can not only realize the switching of medium flow direction, but also connect the three channels. At present, it can also close any channel to connect the other two channels, so as to flexibly control the convergence or diversion of medium in the pipeline.

technical parameter
ZAJTQMain technical parameters of electric cut-off three-way ball valve
Ontology
Valve body formDirect casting three way valve
body materialZG230-450  ZG1Cr18Ni9Ti
Nominal diameterDN15-DN300
Nominal pressurePN1.6  2.5  4.0  6.4MPa
ANSI  150  300LB JIS  10K  20K  30K
Connection formFlange FF RF RTJ etc
Structural lengthComply with iec534
Valve cover formIntegrated
fillerPolytetrafluoroethylene flexible graphite, etc
a sealMetal clip graphite gasket, tetrafluoroethylene gasket, etc
Valve internals
Spool typeO-type tee ball core
Flow characteristics 
Interior materialPlease refer to the attached table for standard material combination, service temperature and pressure
Executive Agency
电动Angle stroke electric actuator
Executive Standards

Executive Standards
1. Design and manufacture: GB / t12237-1989; apl608
2. Inspection and test: GB / t13927-1992; APL 598
Flange connection: JB / t79-2-1994; ASME / ANSI b165
4 structure length: jd-2002

Technical index

Technical index
1. Control accuracy: 0.1% ~ 3.1% adjustable.
2. Receive control signal: 0 ~ 10 mA.DC 、 4~20 mA.DC  Or 1-5 V.DC.
3. Key selection: 1. When the input signal is interrupted: "interrupt" mode (on, off, off) 2. Forward and reverse action selection; 3. Control accuracy selection.
4. Electric device full open, full closed position automatic positioning calibration, convenient and accurate.
5. According to the input signal and the position of the electric device, the intelligent step adjustment and automatic positioning are carried out, and the oscillation suppression precision is high.
6. Output electric device position signal: 4 ~ 20 mA.DC  The corresponding electric device is fully closed and fully open.

Parts material and internal structure

Parts material and internal structure

ZAJTQMaterial and internal structure of main parts of electric cut-off three-way ball valve
The body material is carbon steel
1valve bodyWCBLCBWC9
2seal ringPTFE/PPL
3shimPTFE/Metal graphite spiral wound gasket
4The BallAccording to the actual working conditions
5fillerPTFE/graphite
6Stem2Cr132Cr132Cr13
7Packing glandWCBLCBWC9
The body is made of stainless steel
1valve bodyCF8CF8MCF3M
2seal ringPTFE/PPL
3shimPTFE/Metal graphite spiral wound gasket
4The BallAccording to the actual working conditions
5fillerPTFE/graphite
6Stem304316316L
7Packing glandCF8CF8MCF3M

Note: the above is the standard configuration structure. The standard valve body materials are carbon steel and stainless steel, which can also be configured according to user requirements.

Principle of medium flow direction

Principle of medium flow direction

The three-way ball valve is divided into L-type and T-type, and the medium flow direction is shown in the figure below. L-type three-way ball valve is suitable for medium flow direction switching, which can connect two mutually perpendicular channels. T-type three-way ball valve is suitable for medium diversion, confluence or flow direction switching. T-type hole can make three channels connected with each other or two of them. Three way ball valve generally adopts two seat structure, or four seat structure according to user requirements.

Connection size
ZAJTQElectric cut-off three-way ball valve outline installation dimension unit(mm)
Nominal pressure
(MPa)
Nominal diameter
DN(mm)
size(mm)
DD1D2LH1Abn-d
1.6251158565160199157164-φ14
3214010076180240208184-φ18
4015011084200255208184-φ18
5016512599230286208204-φ18
65185145118290330256204-φ18
80200160132310349256204-φ18
100220160156350421256228-φ18
125250210184400485256228-φ18
150285240211480524256248-φ22
2.5251158565160199157164-φ14
3214010076180240208184-φ18
4015011084200255208184-φ18
5016512599230286208204-φ18
65185145118290330256228-φ18
80200160132310349256248-φ18
100235190156350421256248-φ22
125270220184400485256268-φ26
150300250211480524256288-φ26