Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

ZSJTQPneumatic cut off three way ball valve

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ball Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
ZSJTQPneumatic cut-off three-way ball valve is composed of pneumatic actuator and three-way ball valve. It is a kind of rotary cut-off regulating valve. It has the advantages of tight closing, compact structure, light weight and convenient maintenance. It is widely used in pipeline automation control of gas, liquid, steam, oil and other corrosive media.
Product Details
Product overview

ZSJTQPneumatic cut-off three-way ball valve is composed of pneumatic actuator and three-way ball valve. It is a kind of rotary cut-off regulating valve. It has the advantages of tight closing, compact structure, light weight and convenient maintenance. It is widely used in pipeline automation control of gas, liquid, steam, oil and other corrosive media. The three-way ball valve with two valve seats has the advantages of compact structure, beautiful appearance and good sealing performance. It can switch the flow direction of medium in the pipeline. It can also make two mutually perpendicular channels connected or closed. The four seat sealing three-way ball valve has beautiful appearance and compact and reasonable structure. It can not only realize the switching of medium flow direction, but also connect the three channels. At present, it can also close any channel to connect the other two channels, so as to flexibly control the convergence or diversion of medium in the pipeline.

technical parameter
ZSJTQMain technical parameters of pneumatic cut-off three-way ball valve
Ontology
Valve body formDirect casting three way valve
body materialZG230-450  ZG1Cr18Ni9Ti
Nominal diameterDN15-DN300
Nominal pressurePN1.6  2.5  4.0  6.4MPa
ANSI  150  300LB JIS  10K  20K  30K
Connection formFlange FF RF RTJ etc
Structural lengthaccord withIEC534
Valve cover formIntegrated
filler 
Valve internals
Spool typeO-type tee ball core
Flow characteristicsApproximate quick opening type
Interior material 
Executive Agency
PneumaticPiston type pneumatic actuator
Single action 
Double actionAir on / air off
Principle of medium flow direction

 

The three-way ball valve is divided into L-type and T-type, and the medium flow direction is shown in the figure below. L-type three-way ball valve is suitable for medium flow direction switching, which can connect two mutually perpendicular channels. T-type three-way ball valve is suitable for medium diversion, confluence or flow direction switching. T-type hole can make three channels connected with each other or two of them. Three way ball valve generally adopts two seat structure, or four seat structure according to user requirements.

Parts material and internal structure

 

ZSJTQMaterial and internal structure of main parts of pneumatic cut-off three-way ball valve
The body material is carbon steel
1valve bodyWCBLCBWC9
2seal ringPTFE/PPL
3shimPTFE/Metal graphite spiral wound gasket
4The BallAccording to the actual working conditions
5fillerPTFE/graphite
6Stem2Cr132Cr132Cr13
7Packing glandWCBLCBWC9
The body is made of stainless steel
1valve bodyCF8CF8MCF3M
2seal ring 
3shimPTFE/Metal graphite spiral wound gasket
4The BallAccording to the actual working conditions
5fillerPTFE/graphite
6Stem304316316L
7Packing glandCF8CF8MCF3M

Note: the above is the standard configuration structure. The standard valve body materials are carbon steel and stainless steel, which can also be configured according to user requirements.

Executive Standards

Executive Standards
1. Design and manufacture: GB / t12237-1989; apl608
2. Inspection and test: GB / t13927-1992; APL 598
Flange connection: JB / t79-2-1994; ASME / ANSI b165
4 structure length: jd-2002

Connection size
ZSJTQDimension unit of outline installation of pneumatic cut off three way ball valve(mm)
Nominal pressure
(MPa)
Nominal diameter
DN(mm)
size(mm)
DD1D2LHL0bn-d
1.6251158565160199164164-φ14
3214010076180240190184-φ18
4015011084200255210184-φ18
5016512599230286247204-φ18
65185145118290330276204-φ18
80200160132310349308204-φ18
100220160156350421348228-φ18
125250210184400485432228-φ18
150285240211480582524248-φ22
2.5251158565160199164164-φ14
3214010076180240190184-φ18
4015011084200255210184-φ18
5016512599230286247204-φ18
65185145118290330276228-φ18
80200160132310349308248-φ18
100235190156350421348248-φ22
125270220184400485432268-φ26
150300250211480582524288-φ26