HH44Z/X、HH44-l6The slow closing check valve is used for water supply and drainage pipeline. It is installed at the outlet of water pump to prevent medium reverse flow and eliminate destructive water hammer. It can effectively reduce the closing water hammer pressure of valve and ensure the safe operation of pipe network. It has the advantages of light valve disc, large opening, small fluid resistance, novel water hammer eliminating mechanism, stable and reliable sealing performance, wear resistance, long service li......
Product overview
HH44Z/X、HH44-l6The slow closing check valve is used for water supply and drainage pipeline. It is installed at the outlet of water pump to prevent medium reverse flow and eliminate destructive water hammer. It can effectively reduce the closing water hammer pressure of valve and ensure the safe operation of pipe network. It has the advantages of light valve disc, large opening, small fluid resistance, novel water hammer eliminating mechanism, stable and reliable sealing performance, wear resistance, long service life, stable operation, no vibration and no noise. The retarded slow closing check valve produced by our company can be used in the drainage pipeline of clean water, sewage, sea water and other media, which can not only prevent the backflow fork of the medium, but also effectively limit the destructive water hammer and ensure the safety of the pipeline.
performance parameter
HH44X、HH44T、HH44HPerformance parameters of pn10-pn25 type micro resistance slow closing check valve |
| model | HH44T-10~25 | HH44X-10~25 | HH44H-10~25 |
working pressure(MPa) | 1.0~2.5 |
Applicable temperature(℃) | ≤80 |
| Applicable media | water |
| Material Science | Valve body and cover | Gray cast iron, carbon steel |
| Disc | Rubber assembly |
| Valve shaft | stainless steel |
technical parameter
| model | Nominal diameter DN(mm) | Nominal pressure PN(MPa) | Test pressurePs(MPo) | Maximum working pressure (MPa) | working temperature | Applicable media |
| housing | seal up |
T 16 HH44X-10 H 25 | 20-800 | 1.0 | 1.5 | 1.1 | 1.0 | 0-80℃(root According to user requirements accessible200℃) | Water, weak rot Corrosive medium |
T HH44X H | 1.6 | 2.4 | 1.76 | 1.6 |
HH44Z/X | 2.5 | 3.75 | 2.75 | 2.5 |
零件材料
| Part name | Valve body and cover | Disc | Valve shaft |
| Material Science | Gray cast iron, cast steel | Steel plate and rubber assembly | stainless steel |
Structure diagram
Connection size
HH44X、HH44T、HH44HDimension of external connection of PN10 ~ PN25 micro resistance slow closing check valve(mm) |
| Nominal diameter | Main shape and connection dimension |
| L | W | H |
HH44T-10 HH44X-10 H44H-10C HH44T-16 HH44X-16 HH44H-16C HH44T-25 HH44X-25 HH44H-25 |
50 | 230 | 270 | 300 |
65 | 290 | 290 | 320 |
80 | 310 | 300 | 354 |
100 | 350 | 320 | 350 |
125 | 400 | 340 | 380 |
150 | 480 | 410 | 500 |
200 | 500 | 450 | 580 |
250 | 600 | 550 | 670 |
300 | 700 | 580 | 730 |
350 | 800 | 630 | 820 |
400 | 900 | 700 | 920 |
450 | 1000 | 800 | 950 |
500 | 1100 | 900 | 1100 |
600 | 1300 | 990 | 1200 |
700 | 1400 | 1120 | 1550 |
800 | 1500 | 1300 | 1700 |
matters needing attention
The following matters should be paid attention to in the installation of check valve with main shape and connection dimensions
1. In the pipeline, do not make the check valve bear the weight, large check valve should be independently supported, so that it is not affected by the pressure produced by the pipeline system.
2. During installation, the direction of medium flow should be consistent with the arrow direction of valve body.
3. Lift type vertical disc check valve shall be installed in vertical pipeline.
4. Lift type horizontal disc check valve shall be installed on horizontal pipeline.