Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

D73H、D43HWafer type hard seal manual butterfly valvePN10~PN25

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
D73HManual butterfly valves PN10 ~ PN25 are installed in petroleum, chemical, food, pharmaceutical, textile, papermaking, hydropower, ship, water supply and drainage, smelting and other systems. They are used for regulating and intercepting all corrosive and non corrosive gas, liquid, semi fluid and solid powder pipelines and containers.
Product Details
Product description

D73HManual butterfly valves PN10 ~ PN25 are installed in petroleum, chemical, food, pharmaceutical, textile, papermaking, hydropower, ship, water supply and drainage, smelting and other systems. They are used for regulating and intercepting all corrosive and non corrosive gas, liquid, semi fluid and solid powder pipelines and containers, and can be installed at any position.

Connection size
D73H、D43HExternal dimensions of clamp type hard seal manual butterfly valve PN10 ~ PN25
Nominal diameterStandard value of structure length Flange size and bolt hole size (standard value) 
1.0MPa1.6MPa2.5MPa
millimeterinchL2HH1D1Z-daD1Z-daD1Z-da  
502432653302501254-1890°1254-1890°1254-1890°8
6521/2462653622671454-1890°1454-1890°1454-1890°9
803493203752751608-1845°1608-1845°1608-1845°11
1004563204102951808-1845°1808-1845°1908-2245°13
1255643404253052108-1845°2108-1845°2208-2645°22
1506703904653202408-2245°2408-2245°2508-2645°24

 

D43HExternal dimensions of clamp type hard seal manual butterfly valve PN10 ~ PN25
Nominal diameterStandard value of structure lengthOverall dimension (reference value)Flange size and bolt hole size (standard value)参考重量
1.0MPa1.6MPa2.5MPa
millimeterinchLL2HH1DD1D2n-dDD1D2n-dDD1D2n-d(kg)
502108265325240165125994-18165125994-18165125994-1814
6521/21122653402501851451184-181851451184-181851451184-1817
8031143203552552001601328-182001601328-182001601328-1820
10041273204002752201801568-182201801568-182351901568-2222
12551403404353002502101848-182502101848-182702201848-2637
15061403904553102852402118-222852402118-223002502118-2643

结构图

matters needing attention

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. If the configuration of driving device is electric or pneumatic, please refer to the manual of supporting drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.