Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

D971XElectric soft seal wafer butterfly valvePN6~PN16

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
D971XThe electric soft seal double clip butterfly valve pn6 ~ PN16 is made up of double eccentric clip butterfly valve and yxr and AOX fine and small electric actuator. It has compact structure, reliable sealing and long service life.
Product Details
Product overview

D971XThe electric soft seal double clip butterfly valve pn6 ~ PN16 adopts a variety of parts material pairing, which is composed of double eccentric clip butterfly valve and yxr and AOX fine and small electric actuators. It has compact structure, easy 90 ° rotary switch, reliable sealing and long service life. It is widely used in water supply and drainage of water plants, power plants, steel plants, paper-making, chemical industry, catering and other systems as regulation and cut-off use. Material selection of main parts of electric double clip butterfly valve: valve body material: cast iron, nodular iron, stainless steel, copper alloy, aluminum alloy; butterfly plate material: nodular iron, stainless steel, corrosion resistant steel, titanium steel, copper alloy; valve seat: butyrate, ethylene propylene, chloroprene, hiporon, polytetrafluoroethylene, natural rubber, etc.

Product features

1. The valve adopts double eccentric structure, which has the sealing function of closing more tightly, and the sealing performance is reliable.
2. Stainless steel and NBR oil resistant rubber are used as sealing materials, which have long service life.
3. The rubber seal ring can be located on the valve body or butterfly plate. It can be used in different media for users to choose.
4. The butterfly plate adopts frame structure with high strength, large flow area and small flow resistance.
5. It can be used in different media as long as the sealing material of sealing valve seat is replaced.
6. The valve has the function of two-way sealing. It is not controlled by the flow direction of medium or affected by the space position. It can be installed in any direction.
7. The valve has unique structure, flexible operation, labor saving and convenience.

Parts material
D971XMaterials of main parts and components of electric soft seal wafer butterfly valve pn6 ~ PN16
Executive standard for electric soft seal wafer butterfly valve pn6 ~ PN16Material Science
valve bodyHT250 WCB SUS304
DiscNi-P stainless steel with nodular cast iron304、316
Valve shaft2Cr13 SUS304
seal ringNBR、EPDM、VITON、PTFE
执行标准
D971XExecutive standard for electric soft seal wafer butterfly valve pn6 ~ PN16
Manufacturing standardsGB/T 122387-89
Flange standardGB9113-2000、GB17241.6-1998
Structural length standardGB12221-89
Inspection standardGB/T 13927-92
Connection size
D971XMain external connection dimensions of electric soft seal wafer butterfly valve pn6 ~ PN16(mm)
DNLHH1ABФD
0.6MPa1.0MPa1.6MPa
504377443125125889999
654685463125125108118118
804695483125125124132132
10052105498125125144156156
12556129682325245174184184
15056132736325245199211211
20060165800325245254266266
25068197895363313309319319
30078234956363313363370370
350782831029363313413429429
4001023251103363313463480480
4501143691186465469518530548
5001274041280546431568582609
6001544701321546556667682720
7001655031431546556772794794
8001905711542546556878901901
900203621180061770697810011001
10002167022363632706107811121112
12002548182583632706129513281328

Dimensional drawing

matters needing attention

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. If the configuration of driving device is electric or pneumatic, please refer to the manual of supporting drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.