Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

D673HPneumatic double clip type hard seal butterfly valvePN10~PN16

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
D673HPneumatic metal seal butterfly valve is widely used in the pipeline of corrosive medium such as metallurgy, electric power, petroleum, chemical industry, air, gas, combustible gas and water supply and drainage with medium temperature ≤ 550 ℃. It is an excellent device for regulating flow and cutting off fluid.
Product Details
Product overview

D673HThe pneumatic metal seal butterfly valve adopts a U-shaped stainless steel sealing ring, which is in eccentric contact with the polished butterfly plate. It solves the problem that the sealing surface of traditional eccentric butterfly valve is still in sliding contact friction at the moment of opening and closing from 0 ° to 10 ° and realizes the effect that the sealing surface of butterfly plate is separated at the moment of opening and the sealing effect is that the contact is closed, so as to prolong the service life and improve the sealing performance. Therefore, it is widely used in the pipeline of corrosive medium such as metallurgy, electric power, petroleum, chemical industry, air, gas, combustible gas and water supply and drainage with medium temperature ≤ 550 ℃. It is a good Zui device for regulating flow and cutting off fluid.

Product features

1. The butterfly valve has the advantages of simple structure, compact structure, light weight, easy installation, disassembly and maintenance;
2. The butterfly valve has excellent sealing performance with stainless steel in low temperature;
3. After strict calculation of the three-dimensional eccentricity of the butterfly valve, the U-shaped seal ring has almost no friction with the butterfly plate, and has a long service life, and has the function of closing more tightly;
4. The sealing surface of butterfly plate adopts hardfacing cobalt based cemented carbide, which is wear-resistant and has long service life;
5. The butterfly valve has a unique structure, and the "on-off" can be completed only by turning the valve stem 90 degrees. The operation is flexible, convenient, labor-saving, not affected by the medium pressure, and the sealing performance is reliable;
6. High temperature, low temperature and corrosion resistance

Standards adopted

Design standard: GB / t12238-1989
Flange connection dimensions: GB / t9113.1-2000; GB / t9113.2-2000; GB / t9115.1-2000; GB / t9115.2-2000
Structural length: GB / t12221-1989
Pressure test: GB / t13927-1992; JB / t9092-1999

Executive Agency

A new series of GT type pneumatic actuators are adopted, including double acting and single acting (spring return), gear transmission, safe and reliable; aw type pneumatic actuator fork type transmission is adopted for large diameter valves, with reasonable structure, large output torque, double acting and single acting
1. Gear type double piston, large output torque and small volume.
2. The cylinder is made of aluminum and gold, light in weight and beautiful in appearance.
3. Manual operation mechanism can be installed at the top and bottom.
4. Rack connection can adjust opening angle and rated flow.
5. The actuator can be equipped with live signal feedback indication and various accessories to realize automatic operation.
6. Is05211 standard connection provides convenience for product installation and replacement.
7. The adjustable range of 0 ° and 90 ° of standard product can be ± 4 ° by the adjustable joint screw at both ends. Ensure the synchronization accuracy with the valve.

Optional Accessories

 

The following accessories can be selected according to different control and requirements:
Cut off type accessories: single electric control solenoid valve, double electric control solenoid valve, limit switch feedback device.
Adjustable accessories: Electric positioner, pneumatic positioner and electric converter.
Air source treatment accessories: air filter pressure reducing valve, air source treatment triple piece.
Manual mechanism: hvsd manual operation mechanism

Connection size

Nominal diameter

(DN)Main dimensionsFlange size and bolt specification
1.0MPa1.6MPa
LHH1D14-Ф-MD14-Ф-M
5043625112125Ф18125Ф18
6546625115145Ф18145Ф18
8049645120160Ф18160Ф18
10056675138180Ф18180Ф18
12564715164210Ф18210Ф18
15070800175240Ф23240Ф23
20071850208295M20295M20
25076925243350M20355M24
300831035283400M20410M24
350921070310460M20470M24
4001021190340515M24525M27
4501141250380565M24585M27
5001271290410620M24650M30
6001541455470725M27770M33
7001651585550840M27840M33
8001901700640950M30950M36
90020319657101050M301050M36
100021620157701160M331170M39
120025422508901380M361390M45

 

matters needing attention

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. If the configuration of driving device is electric or pneumatic, please refer to the manual of supporting drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.