Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

D973HType a hard seal electric double clip butterfly valvePN6~PN25

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
D973HType a hard seal electric double clip butterfly valve series products, is a long life, energy-saving butterfly valve. Its structure adopts the three-dimensional core principle design, the valve seat adopts the multi-level structure of hard and soft sealing compatibility, with exquisite processing and advanced technology. This product is composed of valve body, butterfly plate, multi-level valve seat, valve rod, transmission mechanism and other main components.
Product Details
Product overview

D973HType a hard seal electric double clip butterfly valve series products, is a long life, energy-saving butterfly valve. Its structure adopts the three-dimensional core principle design, the valve seat adopts the multi-level structure of hard and soft sealing compatibility, with exquisite processing and advanced technology. This product is composed of valve body, butterfly plate, multi-level valve seat, valve rod, transmission mechanism and other main components. Therefore, it is widely used in metallurgy, electric power, petroleum, chemical industry, air, gas, combustible gas and water supply and drainage pipeline.

performance parameter

1. Powerful function: intelligent, adjustable and switch type.
2. Small size: its volume is only about 35% of that of similar products.
3. Easy to use: single phase power supply, simple wiring; unique ball shaped protruding structure, making observation more convenient; no oil, no spot check, waterproof and rust proof, installation at any angle.
4. The protection device has double limit, overheat protection and overload protection. The whole travel time is 15 seconds, 30 seconds, 45 seconds and 60 seconds. And with manual function.
5. Intelligent numerical control: the built-in module adopts advanced single-chip computer and intelligent control software to directly receive the standard signal (4-20mA DC / 1-5vdc) output from computer or industrial instruments to realize intelligent control and precise positioning of valve opening.
3810 series or Na series electronic angular travel actuator can be selected. PSQ series or dyr series can also be selected. 380VAC electric actuator is generally used for valves with diameter ≥ DN 200. Domestic brands such as Ruiji, Aotuoke, Yangzhou electric power, tianertong, Lanling, etc.; foreign brands include British rotok, French Bernard, Germany Ouma, Germany Sibos (Siemens), etc

Product features

Because the butterfly valve of this product adopts the three-dimensional eccentric design principle, the space movement track of the sealing surface is idealized, and there is no friction and interference between the sealing surfaces. In addition, the proper selection of sealing materials ensures the sealing performance, corrosion resistance, high temperature resistance and wear resistance of the butterfly valve. Its main characteristics are as follows:
1. Small opening torque, flexible and convenient, labor-saving and energy-saving.
2. The three-dimensional core structure makes the butterfly plate closer and tighter. Its sealing performance is reliable and no leakage is achieved.
3. High pressure resistance, corrosion resistance, wear resistance, long service life, etc.

technical parameter
D973HMain technical parameters of type a hard seal electric double clip butterfly valve
Nominal diameterDN(mm)50~2000
Nominal pressurePN(Mpa)0.61.01.62.5
Sealing test(Mpa)0.661.11.762.75
strength test(Mpa)0.91.52.43.75
Applicable temperatureCarbon steel: - 29 ℃~ 425 ℃, stainless steel: - 40 ℃~ 650 ℃
Applicable mediaWater, air, natural gas, oil and weak corrosive fluid
Leakage rateIn accordance with GB / T13927-92
Driving modeWorm gear drive, electric, pneumatic and hydraulic
Parts material
D973HWorm gear drive, electric, pneumatic and hydraulic
Part nameMaterial Science
valve bodyWCB、Alloy steel, stainless steel、QT450-10
DiscWCB、Alloy steel, stainless steel、QT450-10
Valve shaft2Cr13Stainless steel, alloy steel
seal ringStainless steel ring
fillerFlexible graphite
Standards adopted
D973HType a hard seal electric double clip butterfly valve adopts standard
Manufacturing standardsJB/T 8527-97
Flange standardGB9113-2000
Structural length standardGB12221-89
Flange standardGB/T 13927-92
Connection size
D973HMain external connection dimensions of type a hard seal electric double clip butterfly valve(mm)
Nominal diameter(DN)Main dimensionsFlange size and bolt specification
1.0MPa1.6MPa2.5MPa
LHH1D14-Ф-MD14-Ф-MD14-Ф-M
5043530112125Ф18125Ф18125Ф18
6546530115145Ф18145Ф18145Ф18
8049565120160Ф18160Ф18160Ф18
10056600138180Ф18180Ф18190Ф23
12564640164210Ф18210Ф18220Ф27
15070705175240Ф23240Ф23250Ф27
20071775208295M20295M20310M24
25076945243350M20355M24370M27
300831070283400M20410M24430M27
350921140310460M20470M24490M30
4001021210340515M24525M27550M33
4501141335380565M24585M27600M33
5001271415410620M24650M30660M33
6001541605470725M27770M33770M36
7001651844550840M27840M33875M39
8001902040640950M30950M36990M45
90020322557101050M301050M361090M45
100021623807701160M331170M391210M52
120025426408901380M361390M451420M52
matters needing attention

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. If the configuration of driving device is electric or pneumatic, please refer to the manual of supporting drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.