Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

D971F46Electric fluorine lined wafer butterfly valve

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
D971F46The electric fluorine lined double clip butterfly valve adopts fluorine lined plastic lining butterfly plate with spherical sealing surface and silicone rubber gasket at the base of valve seat to adjust the sealing performance of the valve; the valve is easy to operate, tight sealing performance and long service life.
Product Details
Product overview

D971F46The electric fluorine lined double clip butterfly valve adopts fluorine lined plastic lining butterfly plate with spherical sealing surface and silicone rubber gasket at the base of the valve seat to adjust the sealing performance of the valve. The valve is easy to operate, with tight sealing performance and long service life. It can be used for fast cutting off or regulating flow. It is suitable for the occasions requiring reliable sealing and good regulating characteristics. The valve body adopts split type, and the sealing of the current end of the valve shaft is controlled by adding fluorine rubber to the rotating base surface between the butterfly plate and the valve seat, so as to achieve compact structure, beautiful appearance, reasonable process and reliable performance. Ensure that the valve shaft does not contact with the fluid medium in the cavity, so it is very convenient to replace the valve shaft, and the valve can be completed without detaching from the pipeline. The products are widely used in the transportation of liquid and gas (including steam) in various types of industrial pipelines, especially for those with severe corrosive media, such as sulfuric acid, hydrofluoric acid, phosphorus, acid, chlorine, strong alkali, aqua regia, etc.

Parts material list

D971F46Material list of main parts and components of electric fluorine lined wafer butterfly valve

Serial numberPart nameGray cast ironcast steelStainless and acid resistant cast steelUltra low carbon stainless and acid resistant cast steel
ZCPRPLRL
1Body / bonnetHT250WCBCF8CF8MCF3CF3M
2DiscWCB35CF8CF8MCF3CF3M
3Stem1Cr132Cr131Cr18Ni9Ti1Cr18Ni12Mo2Ti00Cr18Ni10000Cr17Ni14Mo2
4Liner / seatPTFE(F4),PCTEF(F3),FEP(F46),PFA(可溶F4),PP,PO
5seal ringFPM(Fluororubber)FPM(Fluororubber))
6Elastic strip (PAD)Si(silicon rubber)Si(silicon rubber)
7Adjusting positioning seat0Cr18Ni90Cr18Ni91Cr18Ni9Ti1Cr18Ni12Mo2Ti00Cr18Ni1000Cr17Ni14Mo2
8Fastening bolt35351Cr17Ni21Cr17Ni21Cr18Ni9Ti1Cr18Ni9Ti
9Nut45450Cr18Ni90Cr18Ni90Cr18Ni90Cr18Ni9
10Operating handleZL101
Connection size
D971F46Main shape and connection dimension of electric fluorine lined wafer butterfly valve
 
Nominal diameterLDD1D2fbZ-φdDD1D2fbZ-φd
DN(mm)NPS(inch)PN1.0MPaPN1.6MPa
403/233145110853184-φ18145110853184-φ18
502431601251003204-φ181601251003204-φ18
655/2461801451203204-φ181801451203204-φ18
803461951601353224-φ181951601353228-φ18
1004522151801553228-φ182151801553248-φ18
1255562452101853248-φ182452101853268-φ18
1506562802402103248-φ232802402103288-φ18
2008603352952653268-φ2333529526533012-φ23
250106839035032032812-φ2340535532033212-φ25
300127844040036832812-φ2346041037543412-φ25
350147850046042843016-φ2352047043543816-φ25
4001610256551548243216-φ2558052548544016-φ30
4501811461556553243220-φ2564058554544420-φ30
5002012767062058543420-φ2570565060844620-φ34
6002415478072568553620-φ3084077071855420-φ41
7002816589584080054024-φ3091084078855424-φ41
80032190101095090554424-φ34102095089855424-φ41
9003620311101050100554628-φ341120105099855428-φ41
10004021612201160111555028-φ3412551170111056028-φ48
12004825414501380132555632-φ41   
matters needing attention

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. If the configuration of driving device is electric or pneumatic, please refer to the manual of supporting drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.