Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

TD341WManual worm gear carbon steel ventilation butterfly valvePN0.5

Model
Nature of the Manufacturer
Manufacturer
Product Category
Butterfly Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
TD341WManual worm gear carbon steel ventilation butterfly valve is made of steel plate welding, which has the characteristics of short structure size, light weight and convenient installation. The valve has small driving torque, flexible opening and closing, and convenient operation. There is no visible gap between the sealing pairs and the leakage rate is small.
Product Details
Product overview

TD341WManual worm gear carbon steel ventilation butterfly valve is made of steel plate welding, which has the characteristics of short structure size, light weight and convenient installation. The valve has small driving torque, flexible opening and closing, and convenient operation. There is no visible gap between the sealing pairs and the leakage rate is small. The expansion gap between butterfly plate and valve body is large, which can effectively prevent the jamming caused by heat expansion and cold contraction. The valve can be equipped with a variety of driving devices, such as manual device, worm gear transmission device, pneumatic device, electric device. Ventilation butterfly valve is widely used in metallurgy, petrochemical, electric power, building materials, mining and other industrial pipelines, to control or regulate medium gas.

performance parameter
TD341WMain performance parameters of manual worm gear carbon steel ventilation butterfly valve
Nominal pressure(Mpa)0.05MPaMedium temperature-30℃~-350℃
strength test0.1MPaApplicable mediaCold and hot air, flue gas
Medium velocity25m/sLeakage rate3%
Parts material
TD341WMain parts materials of manual worm gear carbon steel ventilation butterfly valve
Part namevalve bodyValve plate 
Material Sciencecarbon steelcarbon steelCarbon steel, stainless steel
Connection size
TD341WMain dimensions of manual worm gear carbon steel ventilation butterfly valve(mm)
DNDD1LL1L2 n-Фdb
3004053701207162208-1210
3504554201407862408-1410
40050547014092427012-1810
45057053016099929512-1810
500620580160107932512-1810
600720680180114038016-1812
700820780180124043016-1812
800920880200135049016-1812
9001040990200145054016-1814
100011401090220155059020-1814
110012401190220180064020-1814
120013401290240190069020-1814
130014401390240202076020-1816
140015401490260212081024-1816
150016401590260222086024-1816
160017401690280239098024-1816
1700184017902802590103028-2216
1800194018903002709109628-2216
1900204019903002826114632-2216
2000215020903202926119632-2616
2200236023003403126129636-2616
2400256025003603326139636-2618
2600276027003803526149640-2618
2800296029004003726159640-2618
3000319031104004098169844-3018
3200339033104404338179844-3020
3400359035104404578189848-3020
3600379037104804780199848-3020
3800400039104805000209852-3022
4000421041205205200221052-3022
matters needing attention

1. Before installation, check whether the specification, pressure, temperature and corrosion resistance of butterfly valve meet the use requirements. Check whether the parts are damaged or loose.
2. The butterfly valve can be installed on the pipeline at any angle and should be closed; when welding the pipe flange, the valve sealing port should be blocked with a plate to prevent particles and sundries from damaging the sealing surface. After welding, take down the valve, clean the valve sealing surface and pipe cavity, and then install the fixed valve.
3. Please pay attention to the pressure bearing direction when the valve is closed.
4. Before installation, the sealing surface (sealing surface at both ends, sealing surface of butterfly plate and sealing surface of valve seat) shall be thoroughly cleaned to remove dust and dirt.
5. Before installation, the butterfly valve should be air tested, and the opening and closing position should be flexible, and the opening and closing position should be consistent with the position indicated by the pointer.
6. Manual operation, clockwise is off, counter clockwise is on, pointer indication is in place, it is not allowed to open and close the valve with additional force.
7. During the pressure test of the valve, it is not allowed to use single flange for installation and pressure test, but double flange installation and pressure test must be adopted. The test pressure shall comply with GB / T13927-92.
8. The bolts shall be tightened symmetrically and alternately instead of separately.
9. The limit screw has been adjusted before delivery, so it is not allowed to adjust it easily. If the configuration of driving device is electric or pneumatic, please refer to the manual of supporting drive device.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted. In order to prevent the wrong direction when the power supply is connected, the user should first manually open it to the half open position before connecting the power for the first time, and then press the inching switch to check that the direction of the indicator wheel is consistent with the opening direction of the valve.
11. If the valve is found to be open and closed abnormally, the cause shall be found out for repair and elimination, so as to prevent the valve from being damaged due to opening and closing by means of applying force.