Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

ZSHVType V pneumatic regulating ball valvePN16~PN110

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ball Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
It is a kind of rotary adjusting ball valve, which is the executive unit of pneumatic unit combination instrument. It is generally used in combination with electric valve positioner or pneumatic valve positioner. There are two kinds of valve structures: one is to install the reinforced PTFE soft seal seat and the other is 1Cr18Ni9 or 0cr18ni12mo2 (TI) hardfacing all metal hard sealing seat made of stellite alloy.
Product Details
产品说明

ZSHVType V pneumatic regulating ball valve PN16 ~ pn110 is a kind of rotary regulating ball valve, which is the executive unit of pneumatic unit combination instrument. It is generally used in combination with electric valve positioner or pneumatic valve positioner. There are two kinds of valve structures: one is to install the reinforced PTFE soft seal seat and the other is 1Cr18Ni9 or 0cr18ni12mo2 (TI) hardfacing all metal hard sealing seat made of stellite alloy. It is used in normal temperature and high temperature (- 40 ℃) respectively. The product features high transmission efficiency, large thrust, good sealing performance, large rated flow coefficient and strong interchangeability of parts. Due to the shear effect when the valve core and valve seat are closed, it can be especially used for the medium containing fibrous filaments, particles or extremely high viscosity. Therefore, it is widely used in paper-making, petroleum, chemical, pharmaceutical, metallurgy, textile, sewage treatment and other production departments in the medium flow, pressure, liquid level, temperature regulation, in order to achieve automatic control process, the production process according to certain specifications.

technical parameter

ZSHVTechnical parameters of type V pneumatic regulating ball valve PN16 ~ pn110

Nominal diameterDN(mm)253240506580100125150200250300
Rated flow coefficient(kv)25506580135215308525960158025253165
Nominal pressurePNMpa1.6, 2.5, 4.0,6.4(6.3) /2.0, 5.0, 11.0
Bar16, 25, 40, 64(63)/20, 50, 110
LbANSI: Class150、Class300、Class600
Flow characteristicsApproximately equal percentage
Spool angle (degree)0o ± 3O to 90o ± 3O (adjustable)
Operating gas pressure(MPa)4-0.8 for double action and 0.4-1.0 for single action
Applicable operating temperature(℃)Soft seal: PTFE (- 30 ~ 150), reinforced PTFE (- 40 ~ 200), para polyphenylene (- 40 ~ 300), hard seal - 250 ~ 450
Allowable differential pressure(MPa)Working pressure of medium
Action timeSoft seal grade VI (or no leakage) hard seal grade IV
Action time(S)0.5~7(See attached table for details)
Actuator output torque(Nm)5.9~8000
Operating pressure of actuator​0.4—0.7Mpa
Ordering instructions

Please provide the following information when ordering
Whether to use double valve or not; 5. Valve body type, valve type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve body type, valve type, valve;

matters needing attention

1. Be careful in installation and construction, and do not hit the valve.
2. Before installation, the ball valve should be inspected to check the specification and model, and identify whether there is damage, especially for the valve stem. Also turn a few times to see if it is skewed, because during transportation, it is easy to bump the stem. Also remove the debris in the valve.
3. When lifting the ball valve, the rope should not be tied to the hand wheel or the valve stem to avoid damage to these parts, but should be tied to the valve body.
4. The pipeline connected to the ball valve must be cleaned. Compressed air can be used to blow away iron oxide chips, mud and sand, welding slag and other impurities. These debris, not only easy to scratch the sealing surface of the ball valve, in which large particles of debris (such as welding slag), but also block the small valve, so that its failure.
5. The position of valve handle rotation should be reserved during installation. 6. The ball valve cannot be used as throttling. 7. The ball valve with transmission mechanism shall be installed vertically.