Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

BQ671FPneumatic insulated double clip ball valvePN10~PN16

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ball Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
Pneumatic valve is mainly used in petroleum, chemical, metallurgy, pharmaceutical, food and other systems to transport high viscosity medium of bq671f pneumatic insulation double clip ball valve PN10 ~ PN16.
Product Details
Product overview

BQ671FThe pneumatic insulated double clip ball valve has good thermal and cold insulation characteristics. The diameter of the valve is consistent with the pipe diameter, which can effectively reduce the medium heat loss in the pipeline. Pneumatic valve is mainly used in petroleum, chemical, metallurgy, pharmaceutical, food and other systems to transport high viscosity medium of bq671f pneumatic insulation double clip ball valve PN10 ~ PN16. Due to the integral structure of pneumatic ball valve, the insulation ball valve is smaller and lighter than the general ball valve, with no leakage and good sealing performance. The jacket is welded with carbon steel pipe, which is more pressure resistant and firm than the cast one.

Material of parts
BQ671FMaterial of main parts of pneumatic insulated double clip ball valve PN10 ~ PN16
Serial numberPart name  texture of material
CDR
1Valve cover  WCBZG1C/18Ni9TiZG1Cr18Ni12M2Ti
2shim  PTFEPTFEPTFE
3valve seat  PTFEPTFEPTFE
4sphere  1Cr18Ni9Ti1Cr18Ni9Ti1Cr18Ni9Ti
5valve seat  PTFEPTFEPTFE
6Jacket valve body  WCBZG1Cr18Ni9TiZG1Cr18Ni12Mo2Ti
7Bolt  351Cr18Ni9i1Cr18Ni12Mo2Ti
8Stem  1Cr131Cr18Ni9Ti1Cr18Ni12Mo2Ti
9shim  PTFEPTFEPTFE
10filler  PTFEPTFEPTFE
11bushing  PTFEPTFEPTFE
12Spring washer  WCBZG1Cr18Ni9TiZG1Cr18Ni12Mo2Ti
13shim  351Cr18Ni9Ti1Cr18Ni9Ti
14Nut  351Cr18Ni9Ti1Cr18N19Ti
15Connecting bracket  1Cr18Ni9Ti1Cr18Ni9Ti1Cr18Ni9Ti
16Bolt  351Cr18Ni9Ti1Cr18Ni9Ti
17Connecting sleeve  351Cr18Ni9Ti1Cr18Ni9Ti
18Position indicator  PlasticPlasticPlastic

 

Structural connection size

 

BQ671FPneumatic insulated double clip ball valve PN10 ~ PN16 main structure connection size nominal diameter overall dimension connecting flange sizedLL1L2L3HH1GDD1D2fN-Md151435140,17862/75150170/176151/2″-M/17862/,181201/2″100755524-M/21462/91190180/214201/2″110856524-M/21475/91210215/243251/2″1301007834-M/24675/101230225/263301/2″1451108534-M/29591/112250248/274301/2″-M/295101/112270258/284451/2″/8-M/395112/139300300/326501/2″-M1810095140276/478127/176340315/370701″215/230180/190155/16038-M18/20125112/118175/195348/562159/206360375/440801″245/270210/220185/18838-M18/24150135/150210/260378/724176/228420428/500951″280/300240/250210/21838-M22/24

Dimensional drawing

matters needing attention

Preparation before installation of pneumatic ball valve:
1. Ensure that the installation position of the pneumatic pipeline ball valve is in the coaxial position, and the two flanges on the pipeline shall be kept parallel to confirm that the pipeline can bear the weight of the pneumatic pipeline ball valve. If it is found that the pipeline can not bear the weight of the pneumatic pipeline ball valve, the corresponding support shall be provided for the pipeline before installation.
2. To confirm whether there are impurities and welding slag in the pipeline, the pipeline must be blown clean.
3. Check the name plate of the pneumatic pipeline ball valve, and operate the pneumatic pipeline ball valve fully open and closed for several times to confirm that the valve can work normally, and then check all details of the valve once again to ensure that the valve is intact.
4. Remove the protective covers at both ends of the valve, check whether the valve body is clean, and clean the inner cavity of the valve body. Since the sealing surface of the ball valve in the pneumatic pipeline is ball shaped, even small impurities may cause damage to the sealing surface.
Installation of pneumatic pipeline ball valve:
1. Any section of the pneumatic pipeline ball valve can be installed at the upstream end, and the handle pneumatic pipeline ball valve can be installed at any position of the pipeline. If the pneumatic pipeline ball valve with actuator (such as gearbox and electro pneumatic actuator) is equipped, it must be vertically installed, and the inlet and outlet of the valve shall be in horizontal position.
2. The sealing gasket shall be installed between the flange of the ball valve and the flange of the pipeline according to the design requirements of the pipeline.
3. The bolts on the flange shall be tightened symmetrically, successively and evenly.
4. If pneumatic and electric actuators are adopted for pneumatic pipeline ball valve, the installation of air source and power supply shall be completed according to the manual.
Inspection after installation of pneumatic pipeline ball valve:
1. After the installation, start the pneumatic pipeline ball valve to open and close several times. The action should be flexible and the force should be uniform. The pneumatic pipeline ball valve should work normally.
2. According to the design requirements of the pipeline pressure, the sealing performance of the joint surface between the pneumatic pipeline ball valve and the pipe flange is tested after pressurization.