Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

Q671YPneumatic V-type ball valvePN16~PN25

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ball Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
Q671YPneumatic V-type ball valve PN16 ~ PN25 is composed of V-type valve body, pneumatic actuator and other accessories. Pneumatic V-type ball valve is a kind of advanced control valve with right angle rotation structure. V-type ball valve needs no repair for a long time and has a long service life.
Product Details
Product overview

Q671YPneumatic V-type ball valve PN16 ~ PN25 is composed of V-type valve body, pneumatic actuator and other accessories. Pneumatic V-type ball valve is a kind of advanced control valve with right angle rotation structure. V-type ball valve needs no repair for a long time and has a long service life. It provides you with a kind of valve with real high efficiency to control the process condition. V-type ball valve adopts double bearing structure, high mechanical stability and small starting torque, which ensures excellent sensitivity and induction speed of the valve.

Performance specifications
Q671YPerformance Specification for pneumatic v-ball valve PN16 ~ PN25
Nominal pressureTest pressure(MPa)Applicable mediaApplicable temperature
Shell testSealing test
1.62.41.76Water, oil, gas and high viscosity, containing fiber, solid particles and other media-28℃~≤550℃
2.53.752.75
4.06.04.4
Application specificationConnecting flangeJB79-59    GB9113    HG20592-97    ANSI B16.5
Inspection and testJB/T9092-99               API 598 
Material of parts
Q671YMaterial of main parts of pneumatic V-type ball valve PN16 ~ PN25
Material / material codeCPR
Main partsvalve bodyWCBZG1Cr18Ni9TiZG0Cr18Ni12Mo2Ti
paddles2Cr13ZG1Cr18Ni9TiZG0Cr18Ni12Mo2Ti
Stem2Cr131Cr18Ni9Ti0Cr18Ni12Mo2Ti
seal ringCemented carbide
fillerPolytetrafluoroethylene, Roushi ink
Applicable conditionsApplicable mediaWater, steam and oilNitric acidAcetic acid
Applicable temperature-28℃~500℃
ActuatormodelGT or AW series
Air source pressure0.3-0.7MPa
Executive StandardsDesign and manufactureStructural lengthFlange sizePressure temperatureTest and inspection
GBT/12237GB12221GB9113GB9131GB13927

 

External structure dimension
Q671YDimension of pneumatic V-type ball valve PN16 ~ PN25
Nominal pressure
Or pressure level
Nominal diameter(DN)size(mm)
(mm)(in)WLW1L1dd1H1H 
PN1.6MPa25-50-25-643857200 
40-60-25-824963205 
50-7512432621006092225 
65-851453872.512075100235 
80-1001654582.513189108260 
100-1151945097158113117270 
125-13521055105180140140320 
150-16022965114.5216164177340 
200-20024380121.5268205200390 
250-24029792148.5326259252420 
300--338-169-300270510 
PN2.5MPa25-50-25-643857200 
40-60-25-824963205 
50-7512432621006092225 
65-851453872.512075100235 
80-1001654582.513189108260 
100-1151945097158113117270 
125-13521055105180140140320 
150-16022965114.5216164177340 
200-20024380121.5268205200390 
250-24029792148.5326259252420 
300--338-169-300270510 
CLASS 15025150-25-653857200 
401 1/260-25-844963205 
5027512432621026092225 
652 1/2851453872.512175100235 
8031001654582.513489108260 
10041151945097172113117270 
125513521055105196140140320 
150616022965114.5221164177340 
200820024380121.5278205200390 
2501024029792148.5333259252420 
30012-338-169-300270510 

 

 

 

Dimensional drawing

maintain

Preparation before installation of pneumatic ball valve:
1. Ensure that the installation position of the pneumatic pipeline ball valve is in the coaxial position, and the two flanges on the pipeline shall be kept parallel to confirm that the pipeline can bear the weight of the pneumatic pipeline ball valve. If it is found that the pipeline can not bear the weight of the pneumatic pipeline ball valve, the corresponding support shall be provided for the pipeline before installation.
2. To confirm whether there are impurities and welding slag in the pipeline, the pipeline must be blown clean.
3. Check the name plate of the pneumatic pipeline ball valve, and operate the pneumatic pipeline ball valve fully open and closed for several times to confirm that the valve can work normally, and then check all details of the valve once again to ensure that the valve is intact.
4. Remove the protective covers at both ends of the valve, check whether the valve body is clean, and clean the inner cavity of the valve body. Since the sealing surface of the ball valve in the pneumatic pipeline is ball shaped, even small impurities may cause damage to the sealing surface.
Installation of pneumatic pipeline ball valve:
1. Any section of the pneumatic pipeline ball valve can be installed at the upstream end, and the handle pneumatic pipeline ball valve can be installed at any position of the pipeline. If the pneumatic pipeline ball valve with actuator (such as gearbox and electro pneumatic actuator) is equipped, it must be vertically installed, and the inlet and outlet of the valve shall be in horizontal position.
2. The sealing gasket shall be installed between the flange of the ball valve and the flange of the pipeline according to the design requirements of the pipeline.
3. The bolts on the flange shall be tightened symmetrically, successively and evenly.
4. If pneumatic and electric actuators are adopted for pneumatic pipeline ball valve, the installation of air source and power supply shall be completed according to the manual.
Inspection after installation of pneumatic pipeline ball valve:
1. After the installation, start the pneumatic pipeline ball valve to open and close several times. The action should be flexible and the force should be uniform. The pneumatic pipeline ball valve should work normally.
2. According to the design requirements of the pipeline pressure, the sealing performance of the joint surface between the pneumatic pipeline ball valve and the pipe flange is tested after pressurization.