Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

ZSJQPneumatic cut off two way ball valve

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ball Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
ZSJQPneumatic cut-off two-way ball valve is a kind of rotary cut-off ball valve, which is the executive unit in the combination instrument of pneumatic or electric unit, and is generally used in combination with solenoid valve and other components. There are two kinds of sealing forms: soft sealing and hard sealing, which are used under the working conditions of - 40 ℃ - 180 ℃ and - 60 ℃ - 450 ℃.
Product Details
Product overview

ZSJQPneumatic cut-off two-way ball valve is a kind of rotary cut-off ball valve, which is the executive unit in the combination instrument of pneumatic or electric unit, and is generally used in combination with solenoid valve and other components. There are two kinds of sealing forms: soft sealing and hard sealing, which are used under the working conditions of - 40 ℃ - 180 ℃ and - 60 ℃ - 450 ℃. The O-type cut-off ball valve adopts piston type pneumatic actuator or electric actuator. The spherical surface of O-type cut-off ball valve is hardened by special process to make its surface smooth and wear-resistant. The valve seat and sealing material are made of high-temperature and wear-resistant carbon fiber materials, and the product structure is exquisite and reasonable. This series of products have the characteristics of high rotating efficiency, large thrust, good sealing, large rated flow coefficient and good interchangeability of parts. This series of products are widely used in oil, chemical, pharmaceutical, metallurgy, textile, paper, sewage treatment and other production departments of gas, liquid transmission pipeline medium cut or open, to meet the requirements of working conditions.

technical parameter

ZSJQMain technical parameters of pneumatic cut off two way ball valve

Ontology
Valve body formThrough casting valve
body materialZG230-450  ZG1Cr18Ni9Ti
Nominal diameterDN15-DN300
Nominal pressurePN1.6  2.5  4.0  6.4MPa
ANSI  150  300LB JIS  10K  20K  30K
Connection formFlange FF RF RTJ etc
Structural lengthConnection form
Valve cover formIntegrated
fillerPolytetrafluoroethylene flexible graphite, etc
a sealMetal clip graphite gasket, tetrafluoroethylene gasket, etc
Valve internals
Spool typeSpherical shape
Flow characteristicslinear
Interior materialPlease refer to the attached table for standard material combination, service temperature and pressure
Executive Agency
PneumaticPiston type pneumatic actuator
 Air on (spring return)
Double actionAir on / air off
special requirements

1. Special inspection;
2. Completely remove oil and water;
3. Copper prohibition treatment;
4. Special interface and piping;
5. Use under vacuum condition;
6. Specifies the layer pigment;
7. Special medium (oxygen, hydrogen, chlorine gas);
8. Use stainless steel connectors;

Parts material and internal structure

ZSJQMaterial and internal structure of main parts of pneumatic cut off two way ball valve
The body material is carbon steel
1valve bodyWCBLCBWC9
2seal ringPTFE/PPL
3shimPTFE/Metal graphite spiral wound gasket
4The BallAccording to the actual working conditions
5fillerPTFE/graphite
6Stem2Cr132Cr132Cr13
7Packing glandWCBLCBWC9
The body is made of stainless steel
1valve bodyCF8CF8MCF3M
2seal ringPTFE/PPL
3shimPTFE/Metal graphite spiral wound gasket
4The BallAccording to the actual working conditions
5fillerPTFE/graphite
6Stem304316316L
7Packing glandCF8CF8MCF3M

Note: the above is the standard configuration structure. The standard valve body materials are carbon steel and stainless steel, which can also be configured according to user requirements.
Specifications and technical parameters

ZSJQSpecification and technical parameters of pneumatic cut off two way ball valve
Nominal diameter
DN(mm)
1520253240506580100125150200300
Rated flow coefficient
KV
2038721101702703805109401400220035008500
Spool angle1.6、4.0、 6.4
Spool angle(°)0°±4°~90°±4°
Applicable operating temperatureSoft seal - 40 ~ 180 hard seal-60~450
Allowable differential pressure(MPa)Equal to nominal pressure
Allowable leakage levelSoft seal grade VI hard seal grade IV
Action time(S)0.5~0.7
Protection levelEquivalent to ip65.5 dustproof and waterproof type
Cylinder output torque
(N.m)
5.9~6780
Electric actuator input
Torque output(Kgf.m)
2~60
Cylinder operating pressure
(MPa)
Double acting 0.2-1.0 single acting 0.3-1.0

special requirements
1. Special inspection;
2. Completely remove oil and water;
3. Copper prohibition treatment;
4. Special interface and piping;
5. Use under vacuum condition;
6. Specifies the layer pigment;
7. Special medium (oxygen, hydrogen, chlorine gas);
8. Use stainless steel connectors;

Outline structure dimension drawing