Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

Q941FElectric explosion proof stainless steel flange ball valvePN10~PN16

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ball Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
Q941FThe electric explosion-proof stainless steel flange ball valve pn10-pn16 is composed of ball valve and 3410 electric actuator. It uses 220 V AC single-phase power supply as the driving power supply and receives 4-20madc or 1-5vdc input signal from computer regulator or operator to operate. The explosion-proof grade is ExdIIBT4, and exdiict6 can also be used.
Product Details
Product overview

Q941FThe electric explosion-proof stainless steel flange ball valve pn10-pn16 is composed of ball valve and 3410 electric actuator. It uses 220 V AC single-phase power supply as the driving power supply and receives 4-20madc or 1-5vdc input signal from computer regulator or operator to operate. The explosion-proof grade is ExdIIBT4, and exdiict6 can also be used. The special processing technology and Zui new sealing material are used to make the surface roughness and roundness of the ball meet the standard requirements, so as to improve the sealing performance, service life and high temperature resistance. At the same time, the plate moving handle drives the valve rod to drive the ball to rotate, so that the medium can pass smoothly.

Design criteria

1. Design and manufacture: gb12237-89, api608, API 6D, JPI 7s-48, BS5351, din3357.
2. Flange dimensions: JB / t74-90 (jb74-90), gb9112-9131, hgj44-76, sh3406, ANSI B16.5, JIS b2212-2214, NF e29-211, din2543.
3. Structural length: gb12221-89, ANSI B16.10, JIS B2002, NF e29-305, din3202.
4. Main test: JB / T 9092, API 598.

Parts material

Q941FMain parts and components materials of electric explosion proof stainless steel flange ball valve PN10 ~ PN16

Nominal diameter mm15202532405080100
Rated flow coefficientKv203872110170270510940
Nominal pressure MPa1.0;1.6;6.4
Rated angle °0~90
Flow characteristicsGo ahead
Medium temperature ℃-20~120
body materialHT200 ;ZG230-450 ;ZG1Cr18Ni9Ti;ZG0Cr18Ni12Mo2Ti
Sphere material1Cr18Ni9;0Cr18Ni12Mo2Ti
With actuator modelPN10、16361RSA-05
341RSA-05
361RS(X)B-10
341RS(X)B-10
361RSC-30
341RSC-30
PN64361RS(X)B-10
341RS(X)B-10
361RSC-30
341RSC-30
361RSD-150
341RSD-150

 

technical parameter
Q941FTechnical parameters of YXQ series electric explosion proof stainless steel flange ball valve PN10 ~ PN16
modelzuiLarge output torqueAction time 60/50HZZui large shaft diameterMotor class FRated current(A)50HZHandwheel speedweight
single-phasethree-phase
N·m90°mmW110V220V380V440VNkg
YXQ-0088013/16φ20151.200.45N/AN/A107.4
YXQ-01515021/25φ22401.650.880.310.301113
YXQ-02020021/25φ22401.670.890.310.301113
YXQ-03030026/31φ35401.850.920.350.3413.523
YXQ-05050026/31φ35903.601.550.590.5813.524
YXQ-06060026/31φ35903.651.600.600.5913.524
YXQ-08080031/37φ451804.102.150.850.7916.529
YXQ-120120031/37φ451804.202.350.870.8116.529
YXQ-200200093/112φ651804.102.150.850.7949.578
YXQ-300300093/112φ651804.202.350.870.8149.578

 

structure size
Q941FOutline structure dimension of electric explosion proof stainless steel flange ball valve PN10 ~ PN16(mm)
Nominal diameterLDD1H1h3H3D2
15112956548.5120322260
201201057551.5120325260
251281158555120333260
3215013510067.5155427290
4017014511072.5155448290
5018016012572.5155456290
80200195160100165535380
100230215180110165568380
125356245210152165635380
150394280240170165700380
200457335295300120860520

 

Dimensional drawing

matters needing attention

1. Be careful in installation and construction, and do not hit the valve.
2. Before installation, the ball valve should be inspected to check the specification and model, and identify whether there is damage, especially for the valve stem. Turn it a few times to see if it is skewed, because Zui is prone to bump the stem during transportation. Also remove the debris in the valve.
3. When lifting the ball valve, the rope should not be tied to the hand wheel or the valve stem to avoid damage to these parts, but should be tied to the valve body.
4. The pipeline connected to the ball valve must be cleaned. Compressed air can be used to blow away iron oxide chips, mud and sand, welding slag and other impurities. These debris, not only easy to scratch the sealing surface of the ball valve, in which large particles of debris (such as welding slag), but also block the small valve, so that its failure.
5. The position of valve handle rotation should be reserved during installation. 6. The ball valve cannot be used as throttling. 7. The ball valve with transmission mechanism shall be installed vertically.