Welcome Customer !

Membership

Shangou Valve Co, Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: valve,

Xwboo>Products

Shangou Valve Co, Ltd.Free·1YRS

  • E-mail

    59778276@qq.com

  • Phone

    0577-67975099

  • Address

    No. 430, Zhangbao North Road, Anfeng Industrial Zone, Oubei, Wenzhou, Zhejiang Province

Contact Now

Q646F

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ball Valve
Place of Origin
WenZhou City, ZheJiang Province
Overview
1. Small fluid resistance: the cross-section of the connecting pipe between the ball and the valve body is equal, and the ball channel is connected by arc. When the medium passes through the ball, the fluid resistance is small.2. Good sealing performance: the valve seat adopts PTFE material with certain elastic deformation and high strength to achieve good sealing performance and ensure the stability of the valve.
Product Details
Executive Standards

1. Design and manufacture: GB / t; apl608.
2. Inspection and test: GB / t; APL 598.
3. Flange connection: JB / t79-2994; ASME / ANSI b165.

Features and uses

1. Small fluid resistance: the cross-section of the connecting pipe between the ball and the valve body is equal, and the ball channel is connected by arc. When the medium passes through the ball, the fluid resistance is small.
2. Good sealing performance: the valve seat adopts PTFE material with certain elastic deformation and high strength to achieve good sealing performance and ensure the stability of the valve.
3. Long service life: the valve core and smooth neck material is austenitic stainless steel, and the valve seat material is PTFE, which can achieve good corrosion resistance and prolong the service life of the valve.

Test pressure

Q646FTest pressure of pneumatic four way flange ball valve(Mpa)

Nominal pressure
PN
Maximum at normal temperature
working pressure
housing
Test pressure
Airtight seal
Test pressure
High pressure seal
Test pressure
1.61.62.40.61.76
2.52.53.80.62.75
4.04.06.00.64.4
C1aSSl502.03.00.62.2

 

Scope of application
Q646FApplication scope of pneumatic four way flange ball valve
Shell materialSeat materialApplicable temperatureApplicable media
Carbon steel type Cteflon≤150℃Water vapor
Para polyphenylene≤300℃Oil crystal, etc
 teflon≤150℃Nitric acid
Para polyphenylene≤200℃ 
R-type Cr Ni Mo Ti steelteflon≤150℃Acetic acid
Para polyphenylene≤200℃
Parts material
Q646FApplication scope of pneumatic four way flange ball valve
Shell materialSeat materialApplicable temperatureApplicable media
Carbon steel type CNitric acid≤150℃Water vapor
Para polyphenylene≤300℃Oil crystal, etc
P-type Cr Ni Ti steelteflon≤150℃Oil crystal, etc
Para polyphenylene≤200℃ 
R-type Cr Ni Mo Ti steelR-type Cr Ni Mo Ti steel≤150℃Acetic acid
Para polyphenylene≤200℃
matters needing attention

 1. Installation must be careful, do not hit the valve.
2. Before installation, the ball valve should be inspected to check the specification and model, and identify whether there is damage, especially for the valve stem. Also turn a few times to see if it is skewed, because during transportation, it is easy to bump the stem. Also remove the debris in the valve.
3. When lifting the ball valve, the rope should not be tied to the hand wheel or the valve stem to avoid damage to these parts, but should be tied to the valve body.
4. The pipeline connected to the ball valve must be cleaned. Compressed air can be used to blow away iron oxide chips, mud and sand, welding slag and other impurities. These debris, not only easy to scratch the sealing surface of the ball valve, in which large particles of debris (such as welding slag), but also block the small valve, so that its failure.
5. The position of valve handle rotation should be reserved during installation. 6. The ball valve cannot be used as throttling. 7. The ball valve with transmission mechanism shall be installed vertically.