Welcome Customer !

Membership

TANDA Development Pte. Ltd
Free Member ·1YRS
,
Other

Main Products: 自动报警设备

Xwboo>Products

TANDA Development Pte. LtdFree·1YRS

  • E-mail

    info@tandatech.com

  • Phone

  • Address

    217 Kallang Bahru, Singapore 339347

Contact Now

TX7201 Addressable Zone Monitor Module

Model
Nature of the Manufacturer
Other
Product Category
Intelligent Fire Alarm System
Place of Origin
City, Province
Overview
TX7201 Addressable Zone Monitor unit is an addressable interface module, which will integrate conventional detectors or conventional manual call points to addressable system. When any of the connected devices alarms are active, the unit can send the alarm message to fire alarm controller, which generates alarm signal and displays its address. The TX7201 addressable zone monitor module can match with the conventional optical smoke detector, conventional rate of rise and fixed temperature detector and conventional ma......
Product Details

Overview

The TX7201 addressable zone monitor module unit manufactured based on the requirement of EN 54 part 18, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The unit is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.

Feature and Benefits

• EN54-18 Compliance

• Built-in MCU processor and digital addressing

• Intelligent self-diagnosis of open circuit

• Enhanced capacity of interference resistance by using multilevel wave filtering process

• LED status indicator

• Onsite Adjustable Parameter

• Loop and external power input

• Aesthetically pleasing design

• Parallel connecting up to 16 conventional detector

• Unit mounting with fix base for simple installation

Technical Specification

Listed : LPCB Pending

Compliance : EN54-18:2005/AC2007

 

Power Rating

Input Voltage : Loop Power:24VDC [16V to 28V]

External PSU: 20 to 28VDC

Current Consumption : Loop: Standby 1.3mA, Alarm: 5mA

External PSU: Standby10mA, Alarm: 60mA

Control output voltage : 24VDC (Only for the use of TX7130, do not allow the short circuit)

 

Module

End of line Resistance : 5.1Kohms/ ¼ W

Protocol/Addressing : T&A, Value range from 1 to 254

Indicator Status : Normal: Single blink/Active: Steady/Fault: Double Blink

 

Material / Colour : ABS / White Glossy finishing

Dimension / LWH : 108 mm x 86 mm x38 mm

Weight : 154g (with Base), 83g (without Base)

Operating Temperature : -10°C to +50°C

Ingress Protection Rating : IP30

Humidity : 0 to 95% Relative Humidity, Non condensing