Welcome Customer !

Membership

TANDA Development Pte. Ltd
Free Member ·1YRS
,
Other

Main Products: 自动报警设备

Xwboo>Products

TANDA Development Pte. LtdFree·1YRS

  • E-mail

    info@tandatech.com

  • Phone

  • Address

    217 Kallang Bahru, Singapore 339347

Contact Now

TX7200 Addressable Input Module

Model
Nature of the Manufacturer
Other
Product Category
Intelligent Fire Alarm System
Place of Origin
City, Province
Overview
The TX7200 Fire Alarm Addressable Input Module is used to acknowledge normally open monitor signal from interface equipment then sending communication signal to the fire alarm control panel, ideally for monitoring sprinkler system, pressure switch, position switch, signal valves and other third party equipment such as conventional fire alarm panel.
Product Details

Overview

The TX7200 fire alarm addressable input module is manufactured based on the requirement of EN 54 part 18, European Standard. TX7200 fire alarm addressable input module is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The TX7200 fire alarm addressable input module incorporates an intelligent processor that provides automatic monitoring for both open and short circuit of the input signal line. The TX7200 addressable input module is compatible to the TX7004 analogue intelligent fire alarm control panel, produced by single fire alarm system manufacturer T&A, to avoid addressable communication compatibility problems.

 

Feature and Benefits

• EN54-18 Compliance

• LPCB Pending

• Built-in MCU processor and digital addressing

• Fire or Supervisory signal configuration

• Input cable monitored

• Normally open configuration

• LED status indicator

• Loop powered device

• Aesthetically pleasing design

• Surface mounting with fix base for simple installation

Technical Specification

Listed : LPCB Pending

Compliance : EN54-18:2005/AC2007

 

Power Rating

Input Voltage : 24VDC [16V to 28V]

Current Consumption Standby : 0.6mA, Alarm: 1.0Ma

 

Module

Protocol/Addressing : T&A, Value range from 1 to 254

Input Relay : Normally Open dry contact

Input Resistance : 5.1Kohms/ ¼ W

Indicator Status : Normal: Single blink/Active: Steady/Fault: Double Blink

 

Material / Colour : ABS / White Glossy finishing

Dimension / LWH : 108 mm x 86 mm x38 mm

Weight : 155g (with Base), 85g (without Base)

Operating Temperature : -10°C to +50°C

Ingress Protection Rating : IP30

Humidity : 0 to 95% Relative Humidity, Non condensing