Welcome Customer !

Membership

Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD
Free Member ·1YRS
,
Manufacturer

Main Products: Hydraulic System

Xwboo>Products

Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTDFree·1YRS

  • E-mail

    wh@rexroth-hyd.com

  • Phone

    027-85849187

  • Address

    No. 28-30, Building 7, Hubei Modern Hardware & Electrical City, Dongxihu District, Wuhan

Contact Now

Guided relief valve RVG, RVT series

Model
Nature of the Manufacturer
Manufacturer
Product Category
Taiwan hydraulic components
Place of Origin
WuHan City, HuBei Province
Overview
Guided relief valve RVG, RVT series
Product Details
Guided relief valve RVG, RVT series relief valve features:
Guided relief valve RVG, RVT series overflow valve adopts a guided design with extremely low noise, which can keep the pressure in the system stable, and can realize remote control and unloading.
The guided relief valve RVG, RVT has the following models:
RVG-03, RVG-06, RVG-10, RVT-04, RVT-06, RVT-10, RVG-03-3, RVG-06-3, RVG-10-3, RVT-04-3, RVT- 06-3, RVT-10-3, RVG-03-2, RVG-06-2, RVG-10-2, RVT-04-2, RVT-06-2, RVT-10-2, RVG-03- 1, RVG-06-1, RVG-10-1, RVT-04-1, RVT-06-1, RVT-10-1.
Guided relief valve RVG, RVT series relief valve model description:
RV
G
-03
-3
Serial number
Installation type
Nominal diameter in
Pressure adjustment range Mpa
Guided relief valve
G: Plate type
T: Tubular
03:3/8"
04:1/2"
06:3/4"
10:1 1/4"
1:1∼7
2:3.5∼14
3:7∼25
Guided relief valve RVG, RVT series relief valve specification table:
model
high working pressure Mpa
Pressure adjustment range Mpa
Rated flow ℓ/min
Plate
Tube
RVG-03
RVT-04
25
1:1∼7
2:3.5∼14
3:7∼25
100
RVG-06
RVT-06
200
RVG-10
RVT-10
400
Guided relief valve RVG, RVT series relief valve instructions:
1. When the guided relief valve RVG, RVT adjusts the pressure, loosen the lock nut and slowly turn the handle. Clockwise means the pressure rises, and counterclockwise means the pressure drops. After the adjustment, don't forget to tighten the nut. The pressure is limited by the installed retaining ring. When a working pressure cannot be reached, some retaining rings can be removed.
2. Guided relief valve RVG, RVT oil return type: the oil return pipe of direct-acting type and remote control type shall not be connected with the oil return pipe of other valves, but shall return to the oil tank directly. If the internal volume of the return pipe is too large, frequency vibration is likely to occur. Therefore, the length and diameter of the piping should be minimized.
3. Guided relief valve RVG, RVT flow selection: when the flow is small, the adjustment pressure will be unstable. Therefore, when the caliber 03 and 06 are used, the flow rate should be greater than 5L/min, and when the caliber 10 is adopted, the flow rate should be greater than 8L/min.

Similar Product Recommend