Welcome Customer !

Membership

Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD
Free Member ·1YRS
,
Manufacturer

Main Products: Hydraulic System

Xwboo>Products

Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTDFree·1YRS

  • E-mail

    wh@rexroth-hyd.com

  • Phone

    027-85849187

  • Address

    No. 28-30, Building 7, Hubei Modern Hardware & Electrical City, Dongxihu District, Wuhan

Contact Now

Direct-acting remote control relief valve

Model
Nature of the Manufacturer
Manufacturer
Product Category
Taiwan hydraulic components
Place of Origin
WuHan City, HuBei Province
Overview
Direct-acting remote control relief valve
Product Details
Features of direct-acting/remote-control relief valve:

1. DG-G01 series can be used for remote control and multi-stage pressure control.
2. DG-G02 series direct-acting relief valve can be used as a safety valve in a small flow system.

Main specifications of direct-acting/remote-control relief valve:
DG -G01-1,DG -G01-2,DG -G01-3,DG -G02-0,DG -G02-1,DG -G02-2,DG -G02-3

model
high working pressure (bar)
Pressure adjustment range (bar)
Rated flow (l/min)
Mounting bolt
Weight (kg)
DG -G01-1
250
7-70
2
M5Χ45L 4PCL
(#10-24UNC-1 1/2)
1.4
DG -G01-2
35-140
DG -G01-3
70-250
DG -G02-0
250
5-35
20
M5Χ45L 4PCL
(#10-24UNC-1 1/2)
1.5
DG -G02-1
7-70
DG -G02-2
35-140
DG-G02-3
70-250

Direct-acting/remote-control relief valve ordering model description:

DG
G
01
-1
-32
Relief valve code
Installation form
Nominal diameter
Pressure adjustment range (bar)
Design number
Direct-acting relief valve
G: Plate installation
T: Tube installation
01:3
02:6
0:7-35
1:7-70
2:35-140
3:70-250

Instructions for direct acting/remote control relief valve:

Recommended viscosity
Recommended viscosity during normal work: 15~400cSt
If the valve is equipped with an oil return damper, the viscosity range must be 15~200cSt.
Recommended oil
Any hydraulic fluid listed below can be used.
Petroleum base oil: Use oil equivalent to ISO VG32 or VG46.
Synthetic liquid: Use phosphoric acid ester liquid or polyol ester liquid. When using phosphate ester fluid, please use special fluoro rubber seal.
Aqueous liquid: Use water glycol liquid.
Working oil temperature
Continuous working temperature: -17 ~ +70°C
Pollution control
Attention should be paid to control the contamination of hydraulic oil, otherwise it will cause damage to the valve or shorten the service life. Please ensure that the pollution degree is: NAS 1638 -11 grade, with 25μm or finer pipeline oil filter.
Pressure adjustment
When adjusting the pressure, loosen the lock nut and slowly turn the handle. Clockwise means the pressure rises, and counterclockwise means the pressure drops. After the adjustment, don't forget to tighten the lock nut.
The pressure is limited by the installed retaining ring. When a working pressure cannot be reached, some retaining rings can be removed.
Oil return form
When DG-G01 is used as a remote control valve, the oil return pipe must not be connected to the oil return pipe of other valves, but should be directly returned to the oil tank. If the cavity of the return pipe is too large, frequency vibration is likely to occur.

Installation dimensions of direct-acting/remote-control relief valve:

Note: See the corresponding MF valve plate for the dimensions of the mounting surface.
DG-G01 series     weight: 1.4kg
Similar Product Recommend