ORP water quality control instru
In aquarium fish or aquaculture processing, water quality monitor is an important data source equipment. The change of water quality time affects or tanks and the breeding of life. So the important index of water quality real-time on-line detection is very important. Some of the basic indicators including PH, ORP, Dissolved oxygen, temperature, etc. Which combines the functions of the above online water quality monitor is arises at the historic moment. Aqua was Taiwan aquatic products of high quality brand, Taiwan electronic product quality is also a world reputation. This triad D - 816 water quality detector set temperature, PH, ORP three on-line detection at an organic whole, equipped with a full set of probe and correction liquid. Host with digital display screen and press the touch menu buttons. The essence of this water quality detector is equipped with a control socket, can be within the scope of the set of data through the socket automatic start or shut down by the power of the controller. Is quite intelligent. The whole device is so powerful that reading precision, convenient operation, low failure rate. Is the sort of aquarium gamers and factory aquaculture equipment.



Model: D - 816Commodity brand: UP parkerOrigin of goods: TaiwanPH PH/REDOX ORP value/temperature displayElectrical specifications:Using power: AC220V/AC240V, 50/60 hzPower consumption: about 2 wattsControl power supply specifications: a group of AC240V / 5 a capacityFuse: 2 a / 250 v power supply, control the output power of 5 a / 250 v (power supply box)Control the output voltage: same as the using voltageDisplay Numbers: double color LCD backlit LCD displayControl the start-up instructions: LED light indicationMeasuring range: PH0 ~ PH14 / - 1999 ~ 1999 mv / 0 ~ 50 ℃ (32 to 122 ° F)Set the control range: PH3.0 ~ PH11.0 / mv - 1000 ~ 1000Resolution (reading) : 0.01 mv/PH / 1, 0.1 ℃Precision (adjusted temperature at 25 ℃) : plus or minus/plus or minus 0.5 ℃ (0.1% + 2 digits)Input impedance: 10 ⒓ ohmsStart delay: 0 ~ 1.00 PH / 0 ~ 100 mv (5) for the initial valueAlarm set: 0 ~ 2.00 PH / 0 ~ 200 mv (initial value for 30)Control the choice: "HI" is higher than the set value, the start control power "LO" is lower than the set value, start the control power supplyCorrection: button automatic correction PH7.001 (CAL), PH4.00 / PH10.00 (SLOPE)PH: manually adjust the calibration PH7 (6 ~ 8)/PH4 (2.5 ~ 5.5)/PH10 (8 ~ 12) ORP: + 100 mvPH electrode state detection: "C1" on behalf of the electricity is very normal"C2" on behalf of the electricity is very comparable to use state"C3" on behalf of the electrodes are not need to change the new useUsing the environment temperature: 0 ~ 50 ℃ (32 ~ 122 ° F)Using the environment humidity: less than 90%Appearance size: instrument: 165 * 90 * 90 mm (6.5 * 3.6 * 3.6 inch)Power supply box: 115 x 83 x 42 mm (4.5 * 3.3 * 3.3 inch)Standard accessories: operating instructions, link up with each one