Welcome Customer !

Membership

YiXing XuYang Environment Potection Tech.Ltd.
Free Member ·1YRS
WuXi,JiangSu
Manufacturer

Main Products: Filter

Xwboo>Products

YiXing XuYang Environment Potection Tech.Ltd.Free·1YRS

  • E-mail

  • Phone

    0510-87832007,80709007

  • Address

    398 Far East Avenue, Gaoyue Town, Yixing City

Contact Now

JM series of full-automatic water softener

Model
Nature of the Manufacturer
Manufacturer
Product Category
Series of automatic wat..
Place of Origin
NanJing City, JiangSu Province
Overview
JM series of full-automatic water softener
Product Details
  • Product introduction
  • Product advantage
  • Model Selection
  • Typical cases
first,introduction
we corporation selects much mature technology at home and abroad, that is, hydraulic or pneumatic diaphragmvalve,and jma multi-valve controller equipped are assembled into multi-valve full-auto water softener. it overcomes shortcomings of multiway valve and becomes a regeneration product for water softener after its being put into market for years.

second,,working principle
water rigidity consists of (ca2+),(mg2+) and other ions. when raw water contented with rigid ions pass through resin layer in softener, (ca2+),(mg2+) and other ions are exchanged and absorbed by resin. meanwhile, (na2+) ions are released at equal amount. therefore water flow from softener is softended water with rigid ions removed.

when resin absorbs a certain amount of (ca2+),(mg2+) and other ions, it is in need of regeneration. process of regeneration is that resin layer is flushed by salt water in salt carton, thus regid ions in resin layer are exchanged again, and exhausted with regenerated liquid. at last, resin recoves its own soften exchange ability

multi-valve full-auto softened system consists of several controlling diaphragmvalves (hydraulic or pneumatic), multi-valve controller, resin tank, salt carton. controller sends out instructions to each hydraulic control diaphragmvalves respectively according to preestablished programs so as to fulfill interruption of each access. therefore each process of regeneration is realized.

third, application and features
it is widely used in various civil and industrial soften water equipment, such as, boiler feed water, make-up water in recycling, make-up water in heat-supply air-condition system and other industrial production water. water treatment volume is from dozens of tons to several thousand of tons.

features
1、valve in operation selects much mature technology at home and abroad, that is, hydraulic or pneumatic diaphragmvalve. it can be equipped with ø600-ø3000 tank. valve body is reinforced plastics with anticorrosion and long usage life, especially more than 8 years of service life for diaphragm.
2、valve in operation in simple to install, easy to maintain, layman can fulfill check, maintain, replacement and other operations.
3、each working procedure time of jma multi-valve can be set up freely and easy to operate.
4、if power off,various procedures and steps can be fulfilled by manual rotation. operation is simple.
5、regenerated modes can be reverse flow or direct flow depends on customer.

fourth,selection table of equipments
no.
type
water production rate
control mode
controller equipped
remark
1
jmt-750
8.0-10
time control of single tank
jma×1
concrete parameters and instruction see techonolical data one
2
jmt-900
15-20
3
jmt-1200
20-25
4
jmt-1500
30-40
5
jmt-1800
50-60
6
jmt-2000
60-70
7
jmq-750
8.0-10
flow control of single tank
jma×1
concrete parameters and instruction see techonolical data one
8
jmq-900
15-20
9
jmq-1200
20-25
10
jmq-1500
30-40
11
jmq-1800
50-60
12
jmq-2000
60-70
13
jmd2-750
8-10
double tanks,single flow meter, one on,one off
jma×2
concrete parameters and instruction see techonolical data two
14
jmd2-900
15-20
15
jmd2-1200
20-25
16
jmd2-1500
35-40
17
jmd2-1800
50-60
18
jmd2-2000
60-70
25
jme2-750
16-20
double tanks,double flow meter, operate simultaneously, regenerate in turn
jma×2
concrete parameters and instruction see techonolical data  three
26
jme2-900
30-40
27
jme2-1200
40-50
28
jme2-1500
70-80
29
jme2-1800
100-120
30
jme2-2000
120-140
31
jmd3-900
30-40
three tanks,single flow meter, two on ,one off
jma×3
concrete parameters and instruction see techonolical data four
32
jmd3-1200
40-50
33
jmd3-1500
70-80
34
jmd3-1800
100-120
35
jmd3-2000
120-140
36
jmd3-2500
200-250
37
jmd3-3000
280-350
45
jme3-900
45-60
three tanks,three flow meter, operate simultaneously, regenerate in turn
jma×3
concrete parameters and instruction see techonolical data five
46
jme3-1200
60-75
47
jme3-1500
100-120
48
jme3-1800
150-180
49
jme3-2000
180-210
50
jme3-2500
300-350
51
jme3-3000
420-490

reamrk: 1, equipments selection is not limited to specifications above said, multi-valve full-auto water softener can realize larger combinations (for example, 5 tanks).we corporation can make special design depends on analysis data of raw water provided by customer.
2,equioment selection must be confirmed:
reverse-flow regeneration or direct-flow one;
flow control or time control

fifth, parameter table of equipment technology
table one, jmt and jmq type full-auto water softener specification and technology parameter
no.
type
water production rate
(t/h)
operating velocity(m)
resin load(kg)
resin layer height(mm)
resin tank
diameter×height(mm)
salt carton diameter(mm)
pipe diameter of inlet and outlet (mm)
operating
pressure(mpa)
operating
temperature(℃)
regenerated mode
1
jmt-750
8.0-10
20-25
575
1500
ø750×2200
ø800
dn40
0.25-0.5
4-50
regenerated mode
jmq-750
2
jmt-900
15-20
750
1500
ø900×2400
ø940
dn50
jmq-900
3
jmt-1200
20-25
1300
1500
ø1200×2400
ø1200
dn65
jmq-1200
4
jmt-1500
30-40
2200
1500
ø1500×2400
ø1500
dn80
jmq-1500
5
jmt-1800
50-60
3200
1800
ø1800×3400
ø1600
dn100
jmq-1800
6
jmt-2000
60-70
4520
1800
ø2000×3600
ø1800
dn100
jmq-2000

remark: 1, jmt type is single tank time control without meter flow;
2,jmq type is single tank flow control
3,when total rigidity of inflow≤6mmol/l, upper limit can be taken in respect of water production rate; when total rigidity of inflow is 6-8mmol/l, lower limit shall be taken; when total rigidity of inflow>8mmol/l, flow velocity shall be reduced or soften mode at two level shall be implemented.
4, if customer does set salt dissolving system and use salt dosing tank, capacity shall be rectified.

table two, jmd2 type full-auto water softener specification and technology parameter
no
type
water production rate
(t/h)
operating velocity
(m)
resin load
(kg)
resin layer height (mm)
resin tank
diameter×height(mm)
salt carton diameter(mm)
pipe diameter of inlet(mm)
pipe diameter of outlet(mm)
operating
pressure
(mpa)
operating
temperature(℃)
regenerated mode
1
jmd2-750
8.0-10
20-25
1150
1500
¢750×2200
¢800
dn50
dn40
0.25-0.5
4-50
regenerated mode
2
jmd2-900
15-20
1450
1500
¢900×2400
¢940
dn65
dn50
3
jmd2-1200
20-25
2600
1500
¢1200×2400
¢1200
dn80
dn65
4
jmd2-1500
30-40
4400
1500
¢1500×2400
¢1500
dn100
dn80
5
jmd2-1800
50-60
6400
1800
¢1800×3400
¢1600
dn120
dn100
6
jmd2-2000
60-70
9040
1800
¢2000×3600
¢1800
dn150
dn100
1、jmd2 type is double tanks single flow meter,one on one off;
2、when total rigidity of inflow≤6mmol/l, upper limit can be taken in respect of water production rate; when total rigidity of inflow is 6-8mmol/l, lower limit shall be taken; when total rigidity of inflow>8mmol/l, flow velocity shall be reduced or soften mode at two level shall be implemented.
3、systematic salt cartons are two, if customer does set salt dissolving system and use salt dosing tank, capacity shall be rectified and numbe is one.

table three, jme2 type full-auto water softener specification and technology parameter
no
type
water production rate
(t/h)
operating velocity
(m)
resin load(kg)
resin layer height(mm)
resin tank
diameter×height(mm)
salt carton diameter(mm)
pipe diameter of inlet(mm)
operating
pressure
(mpa)
operating
temperature(℃)
regenerated mode
1
jme2-750
16-20
20-25
1150
1500
ø750×2200
ø800
dn65
0.25-0.5
4-50
regenerated mode
2
jme2-900
30-40
1450
1500
ø900×2400
ø940
dn80
3
jme2-1200
40-50
2600
1500
ø1200×2400
ø1200
dn100
4
jme2-1500
70-80
4400
1500
ø1500×2400
ø1500
dn125
5
jme2-1800
100-120
6400
1800
ø1800×3400
ø1600
dn150
6
jme2-2000
120-140
9040
1800
ø2000×3600
ø1800
dn200
1、jmc2 type is double tanks with single meter flow; operate simultaneously and regenerate in turn.
2、jme2 is double tanks double flow meter, operate simultaneously and regenerate separatedly.
3、water production rate means total water volume of double tanks in operation at the same time. water production rate is1/2 when one tank is regenerating. regenerated time of single tank is no less than 2 hours.
4、when total rigidity of inflow≤6mmol/l, upper limit can be taken in respect of water production rate; when total rigidity of inflow is 6-8mmol/l, lower limit can be taken; when total rigidity of inflow>8mmol/l, flow velocity shall be reduced or soften mode at two level shall be implemented.
5、systematic salt cartons are two, if customer does set salt dissolving system and use salt dosing tank, capacity shall be rectified and numbe is one.

table four,jmd3 type full-auto water softener specification and technology parameter
no
type
water production rate
(t/h)
operating velocity
(m)
resin load(kg)
resin layer height(mm)
resin tank
diameter×height(mm)
salt carton diameter(mm)
pipe diameter of inlet
(mm)
pipe diameter of outlet(mm)
operating
pressure(mpa)
operating
temperature(℃)
regenerated mode
1
jmd3-750
16-20
20-25
1725
1500
ø750×2200
ø800
dn80
dn650
0.25-0.5
4-50
regenerated mode
2
jmd3-900
30-40
2175
1500
ø900×2400
ø940
dn100
dn80
3
jmd3-1200
40-50
3900
1500
ø1200×2400
ø1200
dn125
dn100
4
jmd3-1500
70-80
6600
1500
ø1500×2400
ø1500
dn1500
dn125
5
jmd3-1800
100-120
9600
1800
ø1800×3400
ø1600
dn200
dn150
6
jmd3-2000
120-140
13560
1800
ø2000×3600
salt dosing tank is used
dn250
dn2100
7
jmd3-2500
200-250
24000
2000
ø2500×4500
dn300
dn250
8
jmd3-3000
280-350
34000
2000
ø3000×4800
dn350
dn300
1、jmd3 is three tanks with single flow meter, two on one off.
2、when total rigidity of inflow≤6mmol/l, upper limit can be taken in respect of water production rate; when total rigidity of inflow is 6-8mmol/l, lower limit can be taken; when total rigidity of inflow>8mmol/l, flow velocity shall be reduced or soften mode at two level shall be implemented.
3、systematic salt cartons are three, if customer does set salt dissolving system and use salt dosing tank, capacity shall be rectified and numbe is one.

table five,jme3 type full-auto water softener specification and technology parameter
no
type
water production rate (t/h)
operating velocity(m)
resin load(kg)
resin layer height
(mm)
resin tank
diameter×height
(mm)
salt carton diameter
(mm)
pipe diameter of inlet and outlet(mm)
operating
pressure
(mpa)
operating
temperature
(℃)
regenerated mode
1
jme3-900
45-60
20-25
2175
1500
ø900×2400
ø940
dn100
0.25-0.5
4-50
regenerated mode
2
jme3-1200
60-75
3900
1500
ø1200×2400
ø1200
dn125
3
jme3-1500
100-120
6600
1500
ø1500×2400
ø1500
dn150
4
me3j-1800
150-180
9600
1800
ø1800×3400
ø1600
dn250
5
jme3-2000
180-210
13560
1800
ø2000×3600
dn250
6
jme3-2500
300-350
24000
2000
ø2500×4500
dn300
7
jme3-3000
420-490
34000
2000
ø3000×4800
dn400
1、jmc3 type is three tanks with single meter flow; operate simultaneously and regenerate in turn;
2、jme3 is three tanks three flow meters, operate simultaneously and regenerate separatedly.
3、water production rate means total water volume of three tanks in operation at the same time. water production rate is2/3 when one tank is regenerating. regenerated time of single tank is no less than 2 hours.
4、when total rigidity of inflow≤6mmol/l, upper limit can be taken in respect of water production rate; when total rigidity of inflow is 6-8mmol/l, lower limit can be taken; when total rigidity of inflow>8mmol/l, flow velocity shall be reduced or soften mode at two level shall be implemented.
5、systematic salt cartons are three, if customer does set salt dissolving system and use salt dosing tank, capacity shall be rectified and numbe is one.

dimesnsion and installation drawing of jm type full-auto water softener.
(first),installation drawing of single tank direct flow regeneration water softener

type
jmt-750
jmt-900
jmt-1200
jmt-1500
jmt-1800
jmt-2000
jmq-750
jmq-900
jmq-1200
jmq-1500
jmq-1800
jmq-2000
ø1
750
900
1200
1500
1800
2000
ø2
800
940
1200
1500
1600
1800
h
2300
2550
2600
2600
3900
4000
h1
750
750
750
750
750
750
h2
1250
1250
1250
1300
1550
1550
l
1300
1400
1600
1900
2100
2400
d
dn40
dn50
dn65
dn80
dn100
dn100
remark:1、 jmt type has no flow meter
2、working power:220v 50hz 50w
3、sewage outlet shall be as close to water softener as possible.

(second) installation drawing of single tank reverse flow regeneration water softener


type
jmt-750
jmt-900
jmt-1200
jmt-1500
jmt-1800
jmt-2000
jmq-750
jmq-900
jmq-1200
jmq-1500
jmq-1800
jmq-2000
ø1
750
900
1200
1500
1800
2000
ø2
800
940
1200
1500
1600
1800
h
2300
2550
2600
2600
3900
4000
h1
750
750
750
750
750
750
h2
1450
1450
1450
1550
1800
1800
l
1300
1400
1600
1900
2100
2400
d
dn40
dn50
dn65
dn80
dn100
dn100
remark: 1、jmt type has no flow meter
2、working power:220v 50hz 50w
3、sewage outlet shall be as close to water softener as possible.


(third) double tanks direct flow regeneration water softener

type
jmd2-750
jmd2-900
jmd2-1200
jmd2-1500
jmd2-1800
jmd2-2000
jmc2-750
jmc2-900
jmc2-1200
jmc2-1500
jmc2-1800
jmc2-2000
jme2-750
jme2-900
jme2-1200
jme2-1500
jme2-1800
jme2-2000
ø1
750
900
1200
1500
1800
2000
ø2
800
940
1200
1500
1600
1800
h
2300
2550
2600
2600
3900
4000
h1
750
750
750
750
750
750
h2
1250
1250
1250
1300
1550
1550
l1
1300
1400
1900
2100
2400, ,
l2
1200
1300
1500
1800
2000
2200
d
details see technical parameters data
remark:jmd2 and c2 type are single flow meter, jme2 is double flow meters;
working power:220v 50hz 50w
sewage outlet shall be as close to water softener as possible.

(fourth) installation drawing of double tanks reverse flow regeneration water softener


type
jmd2-750
jmd2-900
jmd2-1200
jmd2-1500
jmd2-1800
jmd2-2000
jmc2-750
jmc2-900
jmc2-1200
jmc2-1500
jmc2-1800
jmc2-2000
jme2-750
jme2-900
jme2-1200
jme2-1500
jme2-1800
jme2-2000
ø1
750
900
1200
1500
1800
2000
ø2
800
940
1200
1500
1600
1800
h
2300
2550
2600
2600
3900
4000
h1
750
750
750
750
750
750
h2
1450
1450
1450
1550
1800
1800
l1
1300
1400
1600
1900
2100
2400
l2
1200
1300
1500
1800
2000
2200
d
details see technical parameters data
remark:1、jmd2 and c2 type are single flow meter, jme2 is double flow meters;
2、working power:220v 50hz 50w
3、sewage outlet shall be as close to water softener as possible.


(fifth) installation drawing of three tanks direct flow regeneration water softener

type
jmd3-900
jmd3-1200
jmd3-1500
jmd3-1800
jmd3-2000
jmd3-2500
jmd3-3000
jmc3-900
jmc3-1200
jmc3-1500
jmc3-1800
jmc3-2000
jmd3-2500
jmc3-3000
jme3-900
jme3-1200
jme3-1500
jme3-1800
jme3-2000
jmd3-2500
jme3-3000
ø1
900
1200
1500
1800
2000
2500
3000
ø2
940
1200
1500
salt dosing tank is used
h
2550
2600
2600
3900
4000
4500
4800
h1
750
750
750
750
750
750
750
h2
1250
1250
1300
1600
1600
1800
1800
l1
1400
1600
1900
     
l2
1300
1500
1800
       
d
details see technical parameters data
remark:1、jmd3 and c3 type are single flow meter, jme3 is three flow meters;
2、working power:220v 50hz 50w
3、sewage outlet shall be as close to water softener as possible


(sixth) installation drawing of three tanks reverse flow regeneration water softener


type
jmd3-900
jmd3-1200
jmd3-1500
jmd3-1800
jmd3-2000
jmd3-2500
jmd3-3000
jmc3-900
jmc3-1200
jmc3-1500
jmc3-1800
jmc3-2000
jmd3-2500
jmc3-3000
jme3-900
jme3-1200
jme3-1500
jme3-1800
jme3-2000
jmd3-2500
jme3-3000
ø1
900
1200
1500
1800
2000
2500
3000
ø2
940
1200
1500
salt dosing tank is used
h
2550
2600
2600
3900
4000
4500
4800
h1
750
750
750
750
750
750
750
h2
1250
1250
1300
1600
1600
1800
1800
l1
1400
1600
1900
     
l2
1300
1500
1800
       
d
details see technical parameters data
remark:1、jmd3 and c3 type are single flow meter, jme3 is three flow meters;
2、working power:220v 50hz 50w
3、sewage outlet shall be as close to water softener as possible.
TEL:
Phone:
ADD:
398 Far East Avenue, Gaoyue Town, Yixing City
 
Similar Product Recommend