introduction of disk separation technology
disk separation technology
the giant magnetic separator uses the high-strength magnetic energy product of rare-earth ndfeb permanent magnetic materials, and innovates in the design of magnetic circuit through the combination of rare-earth magnetic disks to achieve high magnetic field intensity and high magnetic field gradient in the working space, so that the ferromagnetic particles in sewage, wastewater and water supply and the non-magnetic particles adsorbed on them can overcome fluid resistance and micro under the action of magnetic field force particle gravity and other mechanical external forces produce rapid directional movement and adsorb on the surface of rare earth disk, so as to separate the suspended solids in wastewater. then, the adsorbent on the surface of rare earth disk is removed by magnetic separation slag unloading device, and then it is planed into the sewage tank, and output by pressure water or slag conveying device, so as to realize the purification and recycling of wastewater.

structure principle of disk separation equipment
the super magnetic separation and purification equipment is composed of a group of strong magnetic rare earth disk fishing and separation machinery. as shown in the figure, when the sewage flows through the channel between the disk groups, the magnetic suspended flocs contained in the water are affected by the magnetic force and adsorbed on the disk surface. with the rotation of the disk, they are quickly separated from the water body. when running to the scraping device, a magnetic separation slag unloading belt is formed, which is scraped into the sludge discharge tank by the sludge scraping mechanism, and the unloaded sludge flows into the magnetic separation drum. after the separation of sludge and water, clean water flows out from the outlet to complete the purification process.
structure schematic diagram of magnetic separation and purification equipment

equipment model

technological process
the complete set of magnetic separation equipment mainly includes pretreatment system, coagulation system, sludge water separation system, magnetic seed circulation system, sludge treatment system and electric control system. according to the site conditions and different use forms, the system can be divided into on-site installation type and vehicle type. the fixed type can be used underground and on the ground, while the vehicle mounted type is mainly used for emergency treatment.
gravity flow is used in the main process of the whole process. the main parts of the equipment are made of stainless steel. the inner cavity of the equipment is protected, and the drainage and dosing pipelines are made of ppr and other non corrosive materials to reduce the corrosion scale and maintenance.
magnetic separation water treatment technology can remove suspended solids and cod in about 3 minutes. the process flow is shown in the figure.
process flow chart of disk separation technology

brief introduction of process flow
(1) the sewage pump pumped water from the water intake point into the coagulation reactor and mixed evenly with a certain concentration of magnetic materials;
(2) under the action of coagulant and coagulant aid, the water containing a certain concentration of magnetic substances can combine with non-magnetic suspended solids to form micro magnetic flocs;
(3) after the coagulation reaction, the effluent flows into the super magnetic separation equipment. under the high magnetic field intensity, the magnetic micro flocs formed are fished out of the water by the magnetic disk to separate the micro magnetic flocs from the water body, and the effluent is directly discharged or reused;
(4) magnetic material and non-magnetic sludge are separated from magnetic flocs by magnetic recovery system. magnetic materials are recycled and reused, and sludge enters sludge treatment system. see figure 2-3 for magnetic seed recovery system equipment.
technical features
the technology of magnetic separation purification water treatment system has the characteristics of stable and mature, short separation time and large treatment capacity.
(1) the technology is stable and mature. the ndfeb rare earth permanent magnet steel used in the core equipment has stable magnetic field strength, which provides guarantee for the production, manufacture and application of the equipment. the separation magnetic field is constructed by rare earth magnetic steel, and the technology is stable and mature
(2) the treatment time is short, and the magnetic separation process flows into water continuously. the hydraulic retention time of gravity settlement is not required. magnetic separation technology because of the use of rare earth magnetic steel, its surface magnetic force is more than 640 times of gravity, can quickly capture small magnetic flocs, water treatment process only takes 3-5 minutes. the magnetic separation time is short.
(3) due to the integration and continuous processing function of magnetic separation process, the unit time treatment efficiency is high and the treatment capacity is large. the equipment occupies a small area. compared with the traditional treatment method, it can save more than 95% of the land. the equipment occupies less space and has large processing capacity
(4) low operating cost
magnetic separation relies on strong magnetic force for adsorption separation, which does not need to form large flocs, which can save reagent consumption (only 1 / 3 ~ 1 / 2 of the dosage of conventional water treatment); it has low installed power, low energy consumption and electricity cost; its operation and maintenance is simple and labor cost is saved. (5) the sludge concentration is high, and the sludge content is more than 70000mg / l and the moisture content is about 93%. it can be directly sent into the dewatering equipment without thickening process. the traditional sludge treatment process can avoid the phenomenon of "muddy water".
(5) high degree of automation, the whole system can realize automatic control and remote control
it has high efficiency flocculation reaction, high recovery rate of magnetic seed, high density of uniform micro floc, forming optimized flocculation reaction with magnetic core, and the practical amount of reagent is less than that of common process.
the extremely fast magnetic adsorption solid-liquid separation rate is hundreds of times higher than that of gravity precipitation, and it is generally 3-5 minutes from inlet to outlet, which is 1 / 10-1 / 20 of hydraulic retention time of high-speed sedimentation and high-density sedimentation.
the highly compact structure and extremely small floor area are only 1 / 6-1 / 8 of the traditional process. at present, the small area of coagulation separation equipment can realize vehicle type.
it has excellent effluent quality, strong resistance to load and water fluctuation impact, ss removal rate ≥ 95%, algae removal rate ≥ 95%, tp removal rate ≥ 90%, cod removal rate ≥ 60%, bod removal rate ≥ 60%
low carbon and energy saving, low operating cost, high degree of automation, small installed capacity of the system, low power consumption, recovery rate of magnetic seeds can reach more than 95%; high degree of automation, fast start-up, simple maintenance and repair.
the moisture content of the separated sludge is low, and the sludge can be directly dewatered without sludge thickening. the moisture content of sludge discharged continuously by the equipment is less than 93%, which can be directly treated by the sludge dehydrator.
to sum up, the implementation of the project has the advantages of low investment, short construction period, good treatment effect, low operation cost and high degree of equipment automation. after the completion of the project, the transparency of water can be improved, the chroma can be reduced, the sensory effect can be improved, and the discharge amount of pollutants (ss, cod, ammonia nitrogen) can be reduced.
application;
vehicular purification station
the magnetic separation technology is introduced into the sewage emergency treatment. by adding magnetic seeds and coagulants to the polluted water body, the pollutants can be quickly removed, and the treated water body can meet the national secondary discharge standard. combined with disinfection and other means, it can be used as emergency drinking water source. in order to meet the requirements of water pollution emergency treatment, the company has developed emergency water purification station equipment. small size, convenient transportation. the equipment can be continuously treated on site, which makes it possible for emergency centralized water supply in the resettlement sites of victims, and emergency treatment of cyanobacteria pollution in rivers, lakes or other drinking water sources.
purification of black and odorous water
with the characteristics of large capacity, short process flow, less land occupation, low investment and low operation cost, the super magnetic separator is widely used in various industries and has a very significant effect on river water purification. according to the requirements of customers, the optimal treatment process can be selected, and the effluent can reach the national grade a standard.
the effluent quality is good: ss < 8mg / l, tp < 0.3mg/l, cod removal rate 85%, bod removal rate 82%
low operation cost: using micro magnetic flocculation technology, the dosage is less, which is about one third of that of ordinary flocculation, and the recycling utilization rate of magnetic seeds is 99.6%
simple operation and convenient maintenance: the equipment does not need backwashing, with high degree of automation and stable and reliable operation
short processing time, fast speed and large processing capacity: the magnetic force of 640 times greater than gravity is generated instantaneously by the disk, with high processing efficiency and short process flow. the total processing time is about 3 minutes, and multiple parallel operation can be realized

coal industry
the mine water of coal mining and mining industry has the characteristics of groundwater and surface water as well as sewage and wastewater. at present, the conventional water treatment technology can meet the water quality requirements of different purposes, but it is far away from the requirements in economic rationality. super magnetic separation technology is a new technology for coal mine water treatment. its equipment works directly under the mine. compared with the traditional surface treatment process of mine water, its advantages of economy, safety and environmental protection are obvious, and the technical process is simple. it solves the difficulties in the purification and treatment of coal mine water, and is a very few water purification technology that can realize the direct operation in the mine.
significant technical features:
the whole underground treatment is adopted, which saves land and energy, and does not need to consider the measures of freezing in winter. the effluent can be directly used for underground production.
make full use of gravity flow, reduce power consumption, and save energy and environmental protection.
the electrical equipment meets the safety and explosion-proof requirements of coal mine.
the system has strong anti shock load and can effectively cope with the fluctuation of incoming water quantity and water quality.
full automatic control is adopted for the whole set of equipment, and the operator can start or stop the operation of the equipment on the local control cabinet.
after the operation of the system, the danger of dredging underground is avoided, the service life of the pump in the central pump station is extended, and great benefits are obtained for customers.
