OSD-102A pot pressure dispenser features:
1, light weight, small size, easy to move. Can be placed on the table.
2, open cans simple and easy to facilitate the feeding, high security.
3, pneumatic power system. Saving energy, effectively reduce the low cost of production.
4, simple structure easy to repair. Just follow the instructions and maintenance instructions can be self-maintenance.
5, pressure and flow can be adjusted. Can be through the air pressure and the nozzle of the free flow control spray flow.
6, melt rate fast. Using 800W power plus high efficiency insulation device. Saving energy, improve the melt speed.
7, low failure rate. The structure is clear, the parts of the implementation of a minimum system connection. High reliability.
8, the operating temperature range. The use of temperature can be 20 ℃ -200 ℃, under certain conditions can be used at 260 ℃.
9, the timer can control the amount of each spray. You can choose a control time of 0 - 60 seconds of a variety of time controller.
10, needle valve control out of plastic instantly sensitive. The use of air open spring off the way, sensitive switch.
11, low cost of equipment for enterprises to save upfront investment.
12, simple operation, new staff as long as 10 minutes of training that can operate the device independently.
13, improve product performance and grade. Compared with the ordinary hot melt glue gun, the product bonding more solid, more efficient.
14, improve efficiency to reduce waste. After the completion of the melt without waiting, ready to use. Do not leak glue, reduce waste.
15, for a wide range, not subject to hot melt type, shape, viscosity, melting temperature, spraying methods and other restrictions.
Typical use:
Toys, stickers, connectors, connectors; audio, pictorial; logo labels; hardware fixed; small paper bonding and fixed ; Small jewelry, handicrafts, hair clips, etc .; electronic products fixed, bonding, insulation; other need to use plastic manual or semi-automatic use.
Technical Parameters:
型号 | | OSD-102A |
熔缸容量 TANK CAPACITY | 公斤 | 1公斤 |
熔胶速率 MAX. CELTNG RATE | 公斤/h | 1公斤/h |
气压范围 AIR PRESSURE | KG/CM2 | 1-4 KG/CM2 |
使用粘稠度 MAX. CPS | CPS | 1000-20000 CPS |
操作温度 MAX. OPERATION TEMP | ℃ | |
外形尺寸 DIMENSION. L*W*H | MM | 370mmx350mmx500mm
|