HZ2691 High Quality 5000v Pulse Coil Tester Used To Test Motor Stator 5000v Pulse Coil Tester
I. General Specifications
2.1 Specifications
Specifications |
|
|
Output for Impulse Voltage | HZ2691-5000V HZ2691_5S4 HZ2691_5S2 100V~5000V 10V steps 5%±10V | HZ2691-3000V 100V~3000V 10V steps 5%±10V |
Inductance Test Range | More than 10μH |
Impulse Energy | Max 250mili-Joules |
LCD Display Resolution Waveform Display Area Contents | 800 x 480 dot-matrix LCD 650×250 dot-matrix(Support 1.5 times amplification display) Setup parameters, standard wave and test wave, comparison result, file information, etc. |
Sample Wave | Sampling rate: Max. 100MSPS, 10 grades(adjustable) Resolution: 8bits Memory depth: 6500 Bytes |
Input Impedance | 10MΩ |
Test Speed | Single-channel test: 15 times/sec Multi-channels test: 2 times/sec |
Averaging Rate | Number of test impulse | 1 to 32 averaging rate programmable |
Number of demagnetizing impulse | 0 to 8 averaging rate programmable |
Measurement Functio | Voltage, Time and Frequency |
Trigger Mode | Internal, Manual(Foot), External and Bus |
Comparison Method | Area Size Comparison Differential Zone Comparison Corona Discharge Comparison Differential Phase Comparison |
Area Size Measurement Accurac | ±1% |
Area Difference Measurement Accuracy | ±1% |
Comparison Output | PASS/FAIL display Beeper alarm and Light alarm |
Beep Mode | Long High, Long Low, Single Short, Double Short tone and OFF |
Memory | Built-in | 200 files |
USB disk | 500 files(standard waveforms and measurement settings) |
Interface | Handler(START,STOP,PASS,FAIL ,BUSY,EOC) RS232C USB Device(support USB TMC and USB CDC) USB Host(support FAT16 and FAT32, GIF) GPIB(option) |