HZDP VLF Hipot Tester Ultra-low Frequency AC Hipot Test Device Portable Vlf Ac Hipot Test Set Tester For Cable
I. VLF HV Tester Series
Model no | Rated Voltage | Load Carrying Capacity | Power FuseTube | Product Structure |
HZDP-30 | 30kV (Peak) | 0.1Hz,≤1.1µF | 10A | Controller Booster |
0.05Hz,≤2.2µF |
0.02Hz,≤5.5µF |
HZDP-40 | 40kV (Peak) | 0.1Hz,≤1.1µF | 10A | Controller Booster |
0.05Hz,≤2.2µF |
0.02Hz,≤5.5µF |
HZDP-50 | 50kV (Peak) | 0.1Hz,≤1.1µF | 20A | Controller Booster |
0.05Hz,≤2.2µF |
0.02Hz,≤5.5µF |
HZDP-60 | 60kV (Peak) | 0.1Hz,≤1.1µF | 20A | Controller Booster |
0.05Hz,≤2.2µF |
0.02Hz,≤5.5µF |
HZDP-80 | 80kV (Peak) | 0.1Hz,≤1.1µF | 20A | Controller Booster |
0.05Hz,≤2.2µF |
0.02Hz,≤5.5µF |
HZDP-90 | 90kV (Peak) | 0.1Hz,≤1.1µF | 20A | Controller Booster |
0.05Hz,≤2.2µF |
0.02Hz,≤5.5µF |
Select products of appropriate specifications according to the subjects
When in use, the capacitance of the test object shall not exceed the rated capacitance of the instrument. If the capacitance of the test object is too small, the output waveform will be affected. If it is less than 0.05 μ F, the instrument will not output normally. At this time, 0.05 μ f capacitor (provided by the company) can be connected in parallel for auxiliary output. See Table 4 and table 5 for the estimation of capacitance of common electrical equipment.
II.Technical Parameters
1. Output voltage ratings: See Details of Table 1
2. Output frequency: 0.1Hz, 0.05Hz, 0.02Hz
3. Measurement accuracy: 3%
4. Positive and negative voltage peak errors: ≤ 3%
5. Voltage wave form distortion: ≤ 5%
6. Use condition: indoor and outdoor; temperature: -10℃∽+40℃
Humidity: ≤ 85%RH
7. Power: AC50Hz, 220V ±5%
8. Power supply fuse tube: See Details of Table 1