Welcome Customer !

Membership

Huazheng Electric Manufacturing (Baoding) Co., Ltd.
Free Member ·1YRS
BaoDing,HeBei
Manufacturer

Main Products: Other High Voltage Electrical Appliances|Battery Tester|Electric Energy Meter Verification Device

Xwboo>Products
Product Categories

Huazheng Electric Manufacturing (Baoding) Co., Ltd.Free·1YRS

  • E-mail

    sales09@bdhuazheng.com,sales@bdhuazheng.com

  • Phone

    86-312-6775511

  • Address

    Electric Valley Technology Center, No. 3088 Lekai North Street, Baoding city, Hebei China

Contact Now

HZ-85G Aerial Wiring Pliers Multifunctional Aerial Wiring Pliers

Model
Nature of the Manufacturer
Manufacturer
Product Category
Electrical Work Equipment
Place of Origin
City, Province
Overview
HZ-85G Aerial Wiring Pliers Multifunctional Aerial Wiring Pliers
Product Details

I. Main features:

1. Simple operation. Use the special operating lever to hang the upper jaw of the wiring pliers at the position to be wired, and push and pull the special operating lever to make the jaws open and close freely to complete the wiring work. The wiring pliers have an open ruler (70mm), and are equipped with a guiding mechanism, which is very convenient to hang the card.

2. Large clamping force. The principle of labor-saving movable pulley is used between the upper and lower jaws of the wiring pliers, so a larger clamping force can be obtained by using a smaller pulling force.

3. There is a clamping force locking and releasing device inside the wire clamp. When the special operating lever is pulled, the elastic energy storage device in the pliers can automatically lock the jaws at any required force. If the special operating lever is not pushed, the self-locking device will never open by itself, and the performance is reliable. When the special operating lever is pushed, the release device in the pliers can open the clamping jaws, which is very convenient to operate.

4. Good contact. The wiring pliers have the function of overcoming the oxide film while clamping, ensuring good contact between the jaws and the wiring position.

5. The short-term energization current is large and the overload capacity is strong.

6. Strong practicability. The angle of the clamp head of the wiring pliers can be changed, and it can complete the test of different angles, different thicknesses, different diameters, and heights of less than 8.5 meters in the wiring position or the wiring work of maintenance and grounding.

7, small weight, easy to use. The structure design is reasonable, the quality is excellent, and the durability is durable, and the weight of the clamp head is less than 700 grams.

II. How to use:

1. Install the wiring pliers on the special operating rod of the required length, install the voltage and current wires on the terminals of the jaws of the wiring pliers, and then segment the wires (the section close to the wiring pliers must be reserved for 20cm margin), fixed on the dedicated operating lever.

2. Adjust the clamp head of the wiring pliers to approximately the same angle as the wiring position (if the wiring position is perpendicular to the ground, replace it with a spare guide hook).

3. Use the special operating lever to lift the wire clamp so that the clamp head is slightly higher than the wire position and gently lean on the wire position, rely on the guide mechanism on the wire clamp to slowly slide down on the wire position so that the jaw is stuck on the wire position, and then slowly (do not use too much force) pull the special operating lever, and the jaws will be clamped.

4. When removing the wire clamp, just push the special operating lever in the direction of the wire clamp, and the jaw can be opened.


Similar Product Recommend