Shan qubo, double wave shaking table
Product advantage
1, sorting high precision, after a selection can get high grade concentrate or waste tailings, and can simultaneously take out a number of products;
2, easy to care, easy to adjust.
Working principle The use of the principle of different mineral composition, the bed to provide the differential movement, slope water and different forms of bed, so that the mineral particles in the bed loose layer, selective transport, the formation of fan- Choose different quality products.
Product introduction
Double curved wave shaker is characterized by an increase of two oblique area, a single straight bed to double oblique two-level hyperbolic waviness, when the pulp into the oblique section of the ore particles forced in the longitudinal movement, In addition to the reunion caused by oblique flow climbing, so that heavy and gravel ore crawl speed and deviation angle difference are increased; and parallel strip area is so thin and uniform and timely discharge, to improve the sorting conditions can be significantly improved Selectivity control under the control of processing capacity and beneficiation recovery rate.
Technical parameters
Device type | The double wave bed4500X1830 | Article shan qubo bed3000X1300 | Article shan qubo bed2100X1050 |
The project name | unit | Coarse ore | middlings | Clay mineral | Coarse ore | middlings | Clay mineral | Coarse ore | middlings | Clay mineral |
Size of the bed | The length of the | mm | 4500 | 4500 | 4500 | 3000 | 3000 | 3000 | 2100 | 2100 | 2100 |
Drive side wide | mm | 1830 | 1830 | 1830 | 1300 | 1300 | 1300 | 1050 | 1050 | 1050 |
Concentrate the wide | mm | 1500 | 1500 | 1500 | 1050 | 1050 | 1050 | 850 | 850 | 850 |
Deal with graded | mm | 3-0.5 | 0.5 to 0.1 | <0.1 | 1.5 to 0.5 | 0.5 to 0.2 | <0.2 | 1.5 to 0.5 | 0.5 to 0.2 | <0.2 |
Processing power | t/d | 24-52 | 16-36 | 8-15 | 3.5-12 | 3.5 to 7.5 | 2.5-6 | 3-10 | 2.5-6 | 1.5 to 3.5 |
Feed concentration | % | 25 to 38 | 15 to 25 | 10-20 | 20-30 | 15 to 25 | 10-20 | 20-30 | 15 to 25 | 10-20 |
stroke | mm | 16-20 | 12-14 | 8-10 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 |
At times | time/points | 280-280. | 300-300. | 320-320. | 280-280. | 280-280. | 280-280. | 240-240. | 260-260. | 260-260. |
Clean water | t/h | 1-1.5 | 0.8 to 1.2 | 0.6 1 | 0.35 to 1.2 | 0.5 to 2.5 | 0.3 4 | 0.15 1 | 0.2 to 1.5 | 0.4 2 |
Transverse slope | 0 | 2.5 to 4.5 | 1.5 to 2.5 | 0.5 to 1.5 | 3.5 5 | 1 to 2 | 1.5 to 1.5 | 3.5 5 | 1 to 2 | 0.5 to 1.5 |
Longitudinal slope | 0 | 1-1.5 | 0.5 1 | 0.5 | | | | | | |
The motor power | KW | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 |
Article bed section shape | | Obtuse triangle | A right triangle | Acute triangle | Obtuse triangle | Obtuse triangle | Obtuse triangle | Obtuse triangle | Obtuse triangle | Obtuse triangle |
The total weight | Kg | 1100 | 1100 | 1100 | 620 | 620 | 620 | 480 | 480 | 480 |
Transmission mechanism | | Eccentric connecting rod mechanism or CAM lever mechanism |