The dryer

　　This company produces the dryer can be tailor-made according to different drying material for heating and heating.Heating can dry charcoal, wine residue, coconut trees leather or other materials.Heat can dry coal, sand, mineral powder, chicken manure, cow dung and so on.The heat source can use coal, gas producer, stove, gas, electric furnace;With reasonable structure, well made, high output, low energy consumption, convenient operation.Product introduction

　　Structure composition and the principle of the dryer: this machine consists of the body, transmission parts, parts and material into and out of wind circle.Equipped with Yang plate cylinder is supported by the roll ring in the two pairs of wheels, wheel cylinder to prevent axial movement, motor by the speed reducer drives the big gear and small gear, and the big gear is fixed on the cylinder rotary, wind and prevent cold air into the body and the combustion chamber.Wet material with hot gas to enter the feed end, in a cylinder body of plate material, raise through the hot gas flow and the drying.

Drying machine with belt drying, drum drying, box drying, tower drying and other models; heat source of coal, electricity, gas, etc .; materials in the drying process of hot air flow and radiation type , Hot air drum drying is the hot air from the tail forward movement, and material in full contact with the heat conduction, convection, radiation heat utilization; the heat will be passed directly to the material, so that the material moisture in the cylinder is constantly being evaporated, The mouth of the wind device will be a lot of water, moisture flow out to prevent the dust caused by the secondary pollution; through the internal spiral mixing, cleaning, copy board, to promote the material movement to complete the entire drying process; Avoid reducing repetitive drying procedures.

type No.	Drum diameter(mm)	The length of the drum(m)	gradient (o )	turn speed(r/min)	heavy The amount (t)	work The rate of (kw)	let product (m3)
Ф0.6x8	Ф600	8	3-5	8	5.1	4	2.26
Ф0.8x10	Ф800	10	3-5	7.2	6.9	4	5.02
Ф1.0x10	Ф1000	10	3-5	6.73	7.5	5.5	7.85
Ф1.2x12	Ф1200	12	3-5	5.8	13.1	11	13.31
Ф1.5x12	Ф1500	12	3-5	4.8	22.3	15	21.2
Ф1.8x14	Ф1800	14	3-5	3.2	45.8	30	48.22
Ф2.2x1.8	Ф2200	18	3-5	3	50.3	37	70.43
Ф2.4x20	Ф2400	20	3-5	2.83	78.4	45	90.43
Ф2.8x24	Ф2800	24	3-5	2.59	97	75	147.8
Ф3.0x20	Ф3000	20	3-5	2.6	102	55	141.3
Ф3.0x25	Ф3000	25	3-5	2.6	110	75	176.7