Welcome Customer !

Membership

Wuxi Tairan Environmental Protection Technology Co., Ltd
Free Member ·1YRS
WuXi,JiangSu
Manufacturer

Main Products: Ozone generator|UV Sterilizer

Xwboo>Products

Wuxi Tairan Environmental Protection Technology Co., LtdFree·1YRS

  • E-mail

    164200835@qq.com

  • Phone

    0510-87896669

  • Address

    Environmental Protection Research Base, No. 9 Chengzhou Road, Gaocheng Town, Yixing, Jiangsu

Contact Now

Spray tower

Model
Nature of the Manufacturer
Manufacturer
Product Category
Exhaust gas treatment equipment
Place of Origin
WuXi City, JiangSu Province
Overview
Spray tower
Product Details

1. Chemical washing method

When the malodorous gas has a high solubility in water or other solutions, or the malodorous substance can react with it, the liquid absorption method can be used to treat it.Common absorbents for malodorous gases include caustic soda, sodium hypochlorite, sulfuric acid, hydrochloric acid, and sodium sulfite.

2. Principle of chemical washing method

The chemical scrubbing method generally adopts the form of spray tower to treat malodorous gas, which is a two-phase countercurrent flow packing absorption tower.The gas enters the purification tower tangentially from the air inlet below the tower body. Under the power of the fan, it quickly fills the space of the air inlet section, and then evenly rises through the flow equalizing section to the packing absorption section.On the surface of the filler, the dirt in the gas phase reacts chemically with the substances in the liquid phase.The soluble salt produced by the reaction flows into the lower storage tank with the absorption liquid.The incompletely absorbed gas continues to rise into the spray section.In the spraying section, the absorbing liquid is sprayed from the evenly distributed nozzles at high speed, forming countless fine mist droplets to fully mix, contact with the gas, and continue chemical reactions.The process of contact between the spray section and the packing section is also a process of material heat and mass transfer.By controlling the flow rate and storage time of the empty tower, the sufficient and stable process is ensured.For some gases with poor chemical activity, it is still necessary to add a certain amount of surfactant to the absorption liquid.The upper part of the tower body is the demisting section, where the absorbing liquid mist entrained in the gas is removed, and the treated clean air is discharged into the atmosphere from the exhaust pipe at the upper end of the purification tower.

3. Features of chemical washing

The packed tower is used to purify the exhaust gas, which is suitable for continuous and intermittent exhaust gas treatment; theprocess is simple, the management, operation and maintenance are quite convenient and simple, and it will not cause any impact on the production of the workshop; it has a wide range of applications and can purify a variety of pollution at the same time Low pressure drop, large operating flexibility, and good defogging performance; the tower body can be made of FRP/PP/PVC and other materials according to the actual situation; the filler is made of low-resistance Pall ring, which can completely remove gas Odor, harmful substances, etc.

4. Scope of application of chemical washing method

It is widely used inthe purification treatment of acid and alkaline waste gas discharged in the process ofchemical industry, electronics, metallurgy, electroplating, textile(chemical fiber), food, machinery manufacturing and other industries.Such as seasoning food, acid making, pickling, electroplating, electrolysis, storage batteries, etc.

Similar Product Recommend