Photo-oxygen catalytic activated carbon adsorption purification process
(1) First, a spray tower is used to purify the particulate matter, vinyl chloride, hydrogen chloride and other waste gas at the feed inlet and outlet, and the purified waste water and the sedimentation tank will be processed by a third-party qualified solid waste company.
(2) The exhaust gas after cleaning by the spray tower contains a lot of water molecules. In order not to affect the back-end treatment equipment, it is necessary to add a high-efficiency demister to remove the water molecules and oil mist in the exhaust gas, which is convenient for the back-end Efficient treatment of equipment, each equipment has a sewage outlet, regular collection and centralized treatment.
(3) After the exhaust gas is purified by the spray tower and demister at the front end, there is a certain amount of exhaust gas, which needs to be effectively purified by photooxygen equipment.
(4) After the exhaust gas passes through the photo-oxygen catalytic equipment, there is still a certain amount of exhaust gas, which needs to be purified by activated carbon equipment to meet the emission standards.
(5) Considering cost savings, use existing equipment as much as possible to avoid duplication of investment and reduce waste. Make better use of the original collection pipeline and axial fan. The end is equipped with a variable frequency centrifugal fan for traction, and the 15-meter chimney meets the emission standards.
Schematic diagram of photo-oxygen catalysis + activated carbon adsorption purification device
2. The working principle of the equipment:
1. Pretreatment of spray tower:
The packing layer in the spray tower is used as a mass transfer device for the contact components between the gas and liquid phases. The bottom of the packing tower is equipped with packing support plates, and the packing is placed on the support plates in a random pile. A packing pressure plate is installed above the packing to prevent it from being blown by the rising airflow. The spray tower spray liquid is sprayed onto the packing from the top of the tower through the liquid distributor, and flows down the surface of the packing. The gas is fed in from the bottom of the tower, and after being distributed by the gas distribution device, it continuously passes through the gaps in the packing layer in countercurrent with the liquid. On the surface of the packing, the gas and liquid two phases are in close contact for mass transfer. When the liquid flows down the packing layer, the wall flow phenomenon sometimes occurs. The wall flow effect causes the uneven distribution of the gas and liquid phases in the packing layer, thereby reducing the mass transfer efficiency. Therefore, the packing layer in the spray tower is divided into two sections, with a redistribution device in the middle, which is sprayed onto the lower packing after redistribution.
2. The principle of primary filtration
Primary filtration is mainly used for pre-filtration of ventilation system, return air filtration of clean room, and pre-filtration of local high-efficiency filtration devices. It is mainly used to filter dust particles with a particle size of 5 microns and above.
Its characteristics are low price, light weight, good versatility and compact structure. The initial filter cotton is set before the photo-oxygen catalysis, which can effectively treat part of the particulate matter in the exhaust gas, and can also reduce the damage to the UV lamp tube.
Activated carbon filter series is installed behind the photolysis to better reduce the concentration of pollutants. Activated carbon filter series are generally divided into: activated carbon filter cotton, activated carbon filter, activated carbon filter bag, honeycomb activated carbon, activated carbon filter and other forms, mainly used to treat benzene, phenols, esters, etc. containing benzene, toluene, xylene, etc. Organic gases such as alcohols and aldehydes, malodorous gases, and low-concentration, large-volume gases containing trace heavy metals. The exhaust gas is directly discharged after adsorption, concentration and purification.
3. Treatment of photo-oxygen catalytic equipment:
This product uses a special high-energy and high-ozone UV ultraviolet light beam to irradiate waste gas, cracking industrial waste gas such as: ammonia, trimethylamine, hydrogen sulfide, methyl sulfide, methyl mercaptan, dimethyl sulfide, dimethyl disulfide, carbon disulfide and styrene, sulfide The molecular chain structure of H2S, VOC, benzene, toluene, and xylene makes the molecular chains of organic or inorganic high-molecular malodorous compounds degrade and transform into low-molecular compounds, such as CO2, H2O, etc. under the irradiation of high-energy ultraviolet light beams.
4. Activated carbon adsorption principle:
The adsorption purification device is composed of an air inlet, an adsorption section, and an air outlet. The organic waste gas is first filtered through the filter to remove particulate matter, and after entering the box from the air inlet, it fully contacts the honeycomb activated carbon in the box, and is adsorbed and purified by the adsorption section. The purified air is discharged into the atmosphere by a fan. The saturated activated carbon can be taken out for regeneration treatment, and can be used continuously after regeneration.
5. Fire and explosion protection
(1) The whole set of equipment basically does not need to be charged. The waste gas treatment room of the waste gas treatment equipment is strictly separated from the electric control box and live parts. All parts that need to be connected are sealed with high temperature resistance, corrosion resistance wires and rubber pads, and no charging is allowed. Partly in contact with exhaust gas.
(2) The centrifugal fan is connected, protected and used in strict accordance with safety production.
(3) The equipment is made of anti-corrosion materials.
(4) The purification equipment is firmly fixed to the ground.
(5) The exhaust gas treatment equipment is connected to the lightning protection wire and has a good grounding.