I. Overview
The photocatalytic oxygen deodorization device is a kind of high-efficiency and rapid removal of volatile organic compounds ( VOC ), inorganic substances, hydrogen sulfide, ammonia, mercaptans, benzene and other pollutants. Technology and environmental protection equipment. The deodorization efficiency can reach 99.5% , and the deodorization effect exceeds the national emission standards for odor pollutants ( GB14554-93 ). It has the characteristics of strong adaptability, low operating cost, no pretreatment and small footprint. The device is widely used It is used in the deodorization and purification of various polluting odorous gases such as oil refineries, rubber plants, chemical plants, pharmaceutical plants, sewage treatment plants, garbage transfer stations, etc. Among them, it is especially suitable for the deodorization and deodorization of spray paint exhaust gas.
2. The harm of various odors such as inorganic substances, hydrogen sulfide, ammonia, mercaptans, benzene and other pollutants to the body
1. The harm of benzene to the human body
Benzene is a colorless liquid with a special aromatic taste. It has a boiling point of 80.1 ℃. Toluene and xylene are homologues of benzene, which are all coal tar fractionation or petroleum cracking products. At present, toluene and xylene are often used in indoor decoration instead of pure benzene as solvents or diluents for various glue paint coatings and waterproof materials. Because benzene is volatile, flammable, and the vapor is explosive. People who inhale high-solubility toluene and xylene within a short period of time can cause nervous system anesthesia. In mild cases, there may be dizziness, headache, nausea, chest tightness, fatigue, and confusion. In severe cases, it may cause coma and cause respiratory and circulatory failure and death. . Long-term exposure to toluene and xylene with a certain solubility can cause chronic poisoning, and neurasthenia-like symptoms such as headache, insomnia, listlessness, and memory loss may occur. Benzene compounds have been identified as strong carcinogens by the World Health Organization.
2. Mercaptan harms the human body
Invasion route: inhalation, ingestion, transdermal absorption.
Health hazards: This product mainly acts on the nervous system. Inhalation of low-concentration vapor can cause headaches and nausea; higher concentrations can cause anesthesia. High concentrations can cause respiratory paralysis and death. Poisoned persons may experience vomiting, diarrhea, protein, cast and hematuria in the urine.
3. Mercaptan harms the environment
Hazardous characteristics: its vapor and air can form an explosive mixture. It is easy to burn and explode in case of open flames and high heat. It will react violently on contact with oxidants. Contact with acid and acid mist produces toxic gas. Reacts with water and steam to release toxic or flammable gas. It reacts violently with calcium hypochlorite and calcium hydroxide. Its vapor is heavier than air and can spread to a considerable distance in a lower place, and it will cause backflame in case of an open flame. In case of high heat, the internal pressure of the container will increase and there is a danger of cracking and explosion.
4. The harm of ammonia to the human body
( 1 ) Pathogenic mechanism
Ammonia has corrosive and irritating effects on the skin tissues it contacts. It can absorb water in the skin tissues, denature tissue proteins, saponify tissue fats, and destroy cell membrane structures. Ammonia has high solubility, so it is mainly irritating and corrosive to the upper respiratory tract of animals or humans. It is often adsorbed on the skin and mucous membranes and conjunctiva, resulting in irritation and inflammation. It can paralyze the cilia of the respiratory tract and damage the mucosal epithelial tissue, making it easy for pathogenic microorganisms to invade and weaken the body's resistance to diseases. Ammonia is usually inhaled into the human body in the form of gas. After being inhaled into the lungs, ammonia easily enters the blood through the alveoli, combines with hemoglobin, and destroys the oxygen transport function. A small part of the ammonia that enters the alveoli is neutralized by carbon dioxide, and the rest is absorbed into the blood. A small amount of ammonia can be excreted with sweat, urine or breathing.
In order to prove the hazards and effects of low-concentration ammonia in the air on human health, experts monitored workers working in indoor environments exposed to ammonia concentrations of 3-13 mg / m3 for 8 hours, with 10 people in each group . Compared with healthy people who are not exposed to ammonia, it is found that people who are exposed to 13 mg / m3 have increased levels of urea and ammonia in their urine, while urea in the blood has increased significantly.
( 2). Symptoms of infection
The effect of ammonia on the human body is to stimulate the eyes and respiratory mucosa. At low concentrations, it is mainly irritating symptoms: peculiar smell, itchy eyes, dry eyes, sneezing, dry throat, runny nose, etc., high concentrations can cause inflammation. Pay more attention to people with respiratory diseases. After inhaling a large amount of ammonia in a short period of time, tearing, sore throat, hoarseness, and
5. The harm of hydrogen sulfide to the human body
Acute hydrogen sulfide poisoning generally has a rapid onset, with clinical manifestations dominated by brain and/or respiratory system damage, and may also be accompanied by organ dysfunction such as the heart. Clinical manifestations can vary significantly due to factors such as the concentration of hydrogen sulfide exposure.
Central nervous system damage is more common:
( 1 ) Headache, dizziness, fatigue, ataxia and mild disturbance of consciousness may occur after exposure to higher concentrations of hydrogen sulfide. Eyes and upper respiratory tract irritation often appear first.
( 2 ) After exposure to high concentrations of hydrogen sulfide, encephalopathy is manifested as manifested yarrow, headache, dizziness, irritability, staggering gait, irritability, confusion, delirium, epileptic convulsions, generalized tonic and clonic seizures, etc.; may be sudden A coma occurs; breathing difficulties may also occur or the heart stops after breathing has stopped. Some cases may be accompanied by pulmonary edema. Symptoms of encephalopathy often appear earlier than respiratory symptoms. It may take some time due to mucosal irritation.
( 3 ) Electrical shock-like deaths can occur after exposure to extremely high concentrations of hydrogen sulfide, that is, respiratory arrest within seconds or minutes after exposure, and cardiac arrest within a few minutes; it can also be coma and respiratory arrest immediately or within minutes And death. Death can occur without alertness. When the odor of hydrogen sulfide is detected, the sense of smell can be immediately lost. In a few cases, the disgusting sweetness can be smelled immediately before the coma. Before death, there is generally no aura symptoms, but deep and rapid breathing may occur first, and then the breathing stops.
6. Respiratory system damage
Chemical bronchitis, pneumonia, pulmonary edema, acute respiratory distress syndrome, etc. may occur. A small number of cases of poisoning can be mainly clinical manifestations of pulmonary edema, while neurological symptoms are mild. May be accompanied by eye conjunctivitis. Keratitis. Myocardial damage
In the course of poisoning, some cases may have palpitations, shortness of breath, chest tightness or angina-like symptoms; a few cases have myocardial infarction- like symptoms after the coma is restored and the symptoms of poisoning improve for 1 week. The electrocardiogram showed an acute myocardial death-like pattern, but it disappeared quickly. Its condition is mild, the course of the disease is short, and the prognosis is good. The diagnosis and treatment method is different from myocardial infarction caused by coronary atherosclerotic heart disease, so it is considered as diffuse toxic myocardial damage. Myocardial enzyme spectrum examination may have varying degrees of abnormalities.
2. Features of UV photocatalysis equipment :
1. UV photocatalytic equipment can efficiently remove volatile organic compounds, hydrogen sulfide, ammonia and other inorganic pollutants, as well as various malodorous odors. The deodorization efficiency can reach more than 99% , and the deodorization effect is better than the odor pollutant emission standard ( GB14554-93)
2. UV photocatalytic equipment can be adapted to the deodorization and purification treatment of most high-concentration, large-scale, and different malodorous gas substances. Through reasonable module configuration, it can be widely used in: oil refineries, rubber plants, chemical plants, pharmaceutical plants, sewage Deodorization, sterilization and purification treatment of malodorous gases such as treatment plants, garbage transfer stations, sewage pump rooms, and central air conditioners. It can work continuously 24 hours a day , and the operation is stable and reliable.
3. The UV photocatalytic equipment has no mechanical devices, no movement noise, no special management and routine maintenance, only regular inspection and maintenance, low maintenance and energy consumption costs, extremely low wind resistance, which can save a lot of exhaust power energy consumption. The purpose of energy saving.
4. UV photocatalytic equipment adopts the principle of photolysis, adopts explosion-proof treatment, which eliminates potential safety hazards, has high fire-proof, explosion-proof and anti-corrosion performance, and has safe and stable equipment performance. It is especially suitable for occasions with high concentrations of flammable and explosive exhaust gas.
5. UV photocatalytic equipment does not require special pretreatment of malodorous gas, such as heating, humidification, etc. The working environment temperature of the equipment is between -30 degrees and 95 degrees, the humidity is between 30% and 98% , and the pH value is between 2 and 13. The range can work normally, no need to add other substances and pharmaceuticals to participate in the treatment.
6. The UV photocatalytic equipment can be flexibly configured according to the air volume and gas concentration. It adopts the drawer-type plug-in installation form, the accessories are unified, and the installation and maintenance are convenient. Spare parts can be maintained and replaced online, which is convenient and flexible.
3. Advantages of UV photocatalytic equipment:
1. Efficient deodorization: It can efficiently remove volatile organic compounds (VOC) , benzene, toluene, xylene molecules, inorganic substances, hydrogen sulfide, ammonia, mercaptans and other major pollutants, as well as various odors, and purify , The deodorization efficiency can reach more than 99% , and the purification and deodorization effect exceeds the emission standard of malodorous pollutants (GB14554-93) .
2. No need to add any substances: only need to set up the corresponding exhaust pipes and exhaust power, so that the industrial waste gas can be decomposed and purified through this equipment, without adding any substances to participate in the chemical reaction.
3. Strong adaptability: It can adapt to the purification treatment of high concentration, large air volume, and different industrial waste gas materials, and can work continuously for 24 hours a day , and the operation is stable and reliable.
4. Low operating cost: This equipment has no mechanical action, no noise, no special management and routine maintenance, only regular inspections, low energy consumption of this equipment, ( each processing 1000 cubic meters / hour, only power consumption is about 0.2 degrees Electricity ) , the wind resistance of the equipment is extremely low <50pa, which can save a lot of exhaust power energy consumption.
5. No pretreatment: industrial waste gas does not need special pretreatment, such as heating, humidification, etc. The working environment temperature of the equipment is between -30 ℃ and 95 ℃, the humidity is between 30% and 98% , and the PH value is between 3 and 3 It can work normally between 11 .
6. The equipment occupies a small area and light weight: It is suitable for special conditions such as compact layout and small space. The equipment occupies less than 1 square meter / handles 10000m3/h air volume.
7. Manufactured from imported materials: high fire-proof and anti-corrosion performance, stable performance and long service life.
8. Environmental protection high-tech patented products: adopting international technical concepts, through long-term repeated tests by experts and our company’s engineers and technicians, developed high-tech environmental protection purification products with completely independent intellectual property rights, which can decompose toxic industrial waste gas Hazardous substances, and can achieve a perfect purification effect. The decomposed gas can be completely harmless and discharged without secondary pollution. At the same time, it can achieve high-efficiency disinfection and sterilization.
1. Introduction to the operation panel:
1. Circuit breaker: used to connect and disconnect the equipment power
2. Ammeter: display operating current
3. Voltmeter: display the working voltage of the equipment;
4. Timer: used to accumulate the total running time of the lamp;
5. Indicator area: It is used to display the working status of each lamp module. The indicator light is always on during normal operation, and when the indicator light is off, there is a lamp failure in the module;
6. Manual / Stop / Auto: in manual mode: start and stop the equipment through the "manual stop / run" knob on the panel , in automatic mode: first set the working time period through the internal time control switch in the control cabinet, and then turn the knob To automatic, the equipment runs according to the set working time period.
2. Technical characteristics of photocatalytic oxygen deodorization device
① In addition to rapid and efficient odor: Fast efficiently remove volatile organic compounds ( the VOC major pollutants), inorganic substances, hydrogen sulfide, ammonia, mercaptans, etc., and a variety of bad odor, deodorization efficiency of up to 99.5% on , deodorized The effect exceeds the emission standard of malodorous pollutants (GB14554-93) .
②No need to add any substance: only need to set up the corresponding exhaust pipe and exhaust power, so that the malodorous gas can be deodorized, decomposed and purified through the device, without adding any substance to participate in the chemical reaction.
③Strong adaptability: It can be adapted to the deodorization and purification treatment of high concentration, large air volume, and different malodorous gas substances. It can work continuously for 24 hours a day , and the operation is safe, stable and reliable.
④Low operating cost: The device has low energy consumption, no mechanical action, no noise, no special management and routine maintenance, only regular inspections, low wind resistance of the device < 30pa, which can save a lot of exhaust power energy consumption.
⑤ No pretreatment and environmental requirements : The malodorous gas does not require special pretreatment , such as heating, humidification, etc. The working environment of the device is between -300C-950C , the temperature is between 30%-98% , and the PH value is between 3- It can work normally between 11 .
⑥The device occupies a small area and light weight: it is suitable for special occasions such as compact layout and small space.
⑦Made of high-quality materials : high fire-proof, anti-corrosion performance, stable performance, long service life, etc.
⑧Environmental protection high-tech products: adopting internationally advanced technical concepts, through long-term repeated tests by experts and our company’s engineering and technical personnel, the device products developed and developed can decompose the toxic and harmful substances in the odorous gas, and can achieve the deodorization effect. After the malodorous gas, it can completely achieve harmless emission, will never produce secondary pollution, and at the same time achieve the effect of efficient and rapid disinfection and sterilization.
3. Precautions for daily maintenance of photocatalytic oxygen deodorization device:
1) When the UV photolysis purification is in the normal operation of the equipment, do not stop the equipment by unplugging the power switch, otherwise it is easy to cause electric shock.
2) The power cord of UV photolysis purification equipment should not be knotted, stretched, pressurized heavy objects, heated at high temperature, otherwise it will cause damage to the power supply.
3) Don't repair the Dongsheng UV photolysis purification equipment yourself without authorization , you must find professional after-sales technical services to repair it.
4) Do not hit or hit the cavity of the UV photolysis purification equipment with other hard objects .
5) Do not pile up debris inside, above or near the UV photolysis purification equipment to avoid affecting the operation of the equipment.
4. Solution to common failures of photocatalytic oxygen deodorization device:
1. When the equipment cannot be started: check whether the main power input is faulty, whether the voltmeter on the panel is normal, and whether the emergency stop knob is activated;
2. When the indicator light on the control panel does not light up: check whether the lamp tube and ballast of the corresponding module are faulty;
3. In automatic mode: the equipment cannot run according to the set time, open the control cabinet to check whether the internal time control switch parameter settings are correct;
4. When the UV deodorizing lamp does not light up: check whether the lamp is damaged, whether the thread is loose, replace the accessory lamp for debugging, all the above problems are eliminated, please contact the manufacturer's technical staff;
5. Comparison of photocatalytic oxygen deodorizing device and other deodorizing devices
Deodorizing treatment technology | Installation investment | Handling air volume | Treatment concentration | Operating cost | Operation Management | Deodorization efficiency | Secondary pollution |
Ultraviolet cold combustion deodorization method | Low | Big | high | Low | easy | high | none |
Direct combustion | high | Small | high | high | difficult | high | have |
Activated carbon adsorption method | Low | middle | Low | high | easy | Low | none |
Chemical catalysis | high | Small | high | high | difficult | high | have |
Ozone deodorization method | high | middle | middle | high | difficult | middle | none |
Biological washing decomposition method | middle | middle | middle | Low | difficult | middle | have |
Plasma pyrolysis | high | Big | Low | Low | easy | middle | none |
6. The main parameters of the photocatalytic oxygen catalytic device
model | Processing air volume (m 3 h) | Power (KW) | Processing efficiency % | Weight (kg) | Voltage (V) |
TR-UVG-1200 | 1200m3/h | 1.5 | ≤ 95.5 | 100 | 220 |
TR-UVG-2000 | 2000m3/h | 2.2 | ≤ 95.5 | 120 | 220 |
TR-UVG-4000 | 4000m3/h | 3.5 | ≤ 95.5 | 170 | 220 |
TR-UVG-6000 | 6000m3/h | 3.6 | ≤ 95.5 | 200 | 220 |
TR-UVG-8000 | 8000m3/h | 4.5 | ≤ 95.5 | 220 | 220 |
TR-UVG-10000 | 10000m3/h | 5.4 | ≤ 95.5 | 250 | 220 |
4. Air source accessories:
Substance name | Main source of malodorous gas |
Hydrogen sulfide | Production or processing of kraft pulp, oil refining, coking, petrochemical, coal gas, manure treatment, carbon disulfide |
Mercaptans | Kraft pulp, oil refining, gas, pharmaceuticals, pesticides, synthetic resins, synthetic fibers, rubber |
Sulfides | Kraft pulp, oil refining, pesticides, garbage disposal, domestic sewage sewer |
ammonia | Nitrogen fertilizer, nitric acid, coking, manure treatment, meat processing |
Amines | Aquatic products processing, livestock processing, leather, bone glue |
Indoles | Manure treatment, domestic sewage treatment, coking, meat rot, slaughter of livestock |
Nitro | Fuel, explosives |
Hydrocarbons | Oil refining, coking, petrochemical, calcium carbide, fertilizer, internal combustion engine exhaust, paint, solvent, ink printing |
Aldehydes | Oil refining, petrochemical industry, medicine, internal combustion engine exhaust, garbage disposal, casting |
Five, after-sales service
1. The company provides customers with after-sales service based on software and hardware maintenance and replacement of spare parts. Customers must strictly follow the instructions provided by the series of products. If there is any abnormality, please contact our company, and our company will assign technicians to do it in time. Operation guidance. Please do not modify, disassemble, repair and other illegal operations on this product privately, so as to avoid unnecessary economic losses.
2. The company promises: fault warranty, 2 hours response, 4 hours solution, 24 hours replacement of the machine and mail, major failures, 36 hours within the province to solve, outside the province: 72 hours to solve the problem.