Electric control valve

NegotiableUpdate on July 31

Model

Nature of the Manufacturer: Manufacturer

Product Category: Hydraulic control valve

Place of Origin: ShangHai City, ShangHai Province

Online Consult Contact Information

Overview

Model: 600XNominal diameter: DN40 ~ 1600mmNominal: PN1.0 ~ 2.5MPaSuitable medium: water, oil, water, sewageTemperature: 0 ~ 80 ℃Structure length standard: GB / T12221-2005Connection flange Standard: GB / T9113Pressure Temperature Level: GB / T12224-2005Test Standards: GB / T13927-2008

Product Details

600X electric control valve is a solenoid valve for the pilot valve hydraulic valve. Commonly used in water supply and drainage and industrial systems in the automatic control, accurate and rapid response control, remote control according to the electrical signal to open and close the pipeline system for remote operation.

600X electric control valve and can replace the gate valve and butterfly valve for large electric operating system. Valve closing speed adjustable, closed without pressure fluctuations. The valve is small, light weight, easy maintenance, easy to use, safe and reliable. Solenoid valve optional AC 220V, or DC 24V, according to various occasions, the use of normally open or normally closed can be

600X electric control valve structure features and uses

600X electric control valve consists of main valve, solenoid pilot valve, needle valve, ball valve, microfilter and pressure gauge to form a hydraulic control takeover system. Through the solenoid pilot valve can be opened and closed on the remote control valve. After installing additional devices, you can control the speed of opening and closing. Electrically controlled hydraulic control valve using the pilot valve to open and close the valve to save energy. Can replace other valves large electric devices. Electrically controlled hydraulic control valve products are widely used in high-rise buildings, living areas and other water supply pipe network systems and urban water supply projects.

600X electric control valve works

When the valve from the inlet end of the water, the water flow through the needle valve into the main valve control room, when the solenoid valve is open, the control room of water through the solenoid pilot valve, ball valve out. Ball valve opening is greater than the needle valve opening, the main valve control chamber pressure is very low, the main valve is fully open state.

When the solenoid valve is closed, the main valve control room of the water can not flow out of the control room to boost the diaphragm to close the main valve.

600X electric control valve main technical parameters

Nominal pressure (Mpa)	Shell test pressure (MPa)	Seal test pressure (MPa)	The maximum inlet pressure (MPa)	Export adjustable pressure (MPa)	Suitable media	Medium temperature (℃)
1.0	1.5	1.1	1.0	0.09-0.8	Water	0-80
1.6	2.4	1.76	1.6	0.10-1.2
2.5	3.75	2.75	2.5	0.15-1.6

600X electric control valve main parts materials

Part Name	Parts and materials
Body valve cover	WCB
Valve seat disc	Copper alloy
O-ring seals	Nitrile rubber
Valve stem	2Cr13
Spring	50CrVA
Needle valve	Copper alloy
Ball valve	Copper alloy
Solenoid pilot valve	stainless steel
Micro filter	stainless steel

Connection Size (PN 1.0-2.5MPa)

Nominal diameter DN	L	H	H1	A	B
50	250	335	90	170	170
65	280	345	98	180	180
80	310	355	110	190	190
100	350	365	120	200	200
125	400	445	145	215	215
150	450	460	155	230	230
200	550	505	190	255	255
250	650	550	250	295	295
300	800	710	290	325	325
350	900	725	330	380	380
400	1000	760	360	415	415
450	1000	810	445	435	435
500	1100	865	495	460	460
600	1100	935	550	520	520
700	1450	1000	605	570	570
800	1560	1100	730	620	620
900	1800	1205	800	670	670
1000	2000	1330	910	830	830