Welcome Customer !

Membership

Shenzhen Ancend Electronic Technology Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 安防监控设备

Xwboo>Products

Shenzhen Ancend Electronic Technology Co.,Ltd.Free·1YRS

  • E-mail

    1021568943@qq.com

  • Phone

    086-0755-83729961

  • Address

    Floor3,NO.26 Zhonghua Road,Zhonghua Industrial Area,Longhua Towm,Bao an District,Shenzhen City,China

Contact Now

Active interface converter

Model
Nature of the Manufacturer
Other
Product Category
Transmission Equipment
Place of Origin
City, Province
Overview
Active interface converter
Product Details
Introduction

General State

 

AD485 is a multifunctional active interface converter from RS-232 to RS-485/RS-422.

This product is compatible for RS-232、RS-485 and RS-422 standards. It can convert the single-ended signal of RS-232 into balanced differential signal of RS-485 or RS-422. RS-232 interface is linked to the computer interface via a DB9 (female) interface. RS-485/RS-422 is connected with patch panel via DB9 needle (male) or directly linked with RJ-45 port of the equipment via RJ-45 port. Due to RS-485 supporting two-wire half Duplex, that is, RS-485 has only a pair of difference circuit to send and receive data, therefore users usually work out a suitable communication protocol, and use Serial interface MODEM controlling signal RTS to adjust the direction of sending and receiving data. The internal circuit of AD-485 interface converter can automatically sense the direction of data current and shift the sending/receiving function control. Forming a convenient RS-485 network, therefore, it is not necessary for the software to compile complex and keep-adjusting RTS signal to control the direction of sending/receiving. The function control of RS-485 is transparent, and it’s not necessary to do any adjustment to the software which is based on the old way of linking of previous RS-232. This product has many advantages, such as small volume, long-distance transmission, high speed, stable performance and external power supply. This product adopts RS-232, RS-485/RS-422 interfaces, which saves the trouble of making hardware or software, is broadly applied in attendance-checking machine, IC card charging system, industry automation control system, bus charging system, canteen charging system and highway charging system.
 
 
Function Parameters
 

The characteristics of interface: The interface is compatible with RS-232C, RS-485/ RS-422 standards of EIA.TIA.

Electric interface: RS-232 interface is DB9 interface (female). RS-485/RS-422 interface is DB9 interface (male), or RJ-45 interface. DB9 needle (male) interface can adapt to patch panel, and through binding post it is convenient to wire routing.

Transmission media: RS-485 is using a pair of twisted pairs.( Shielding is allowed  and 120 Ohm of each twisted pair’s impedance is recommended.)

R-422 is using a pair of twisted pair. (Shielded twisted pair is allowed and 120 Ohm of each twisted pair’s impedance is recommended.)

Working mode: RS-422 asynchronous full duplex. RS-485 asynchronous half duplex.
 
Signal indication: Indicator lights TXD、RXD、POWER.
 
Protection rate: 15000V surge protection.
 
Transmission speed: 75~115200bps
 
Transmission distance: 0~1968.5 yards (0~1800 meters)
 
Working condition: 32°~140°F (0℃~60℃)
 
relative humidity 5%~95%
 
Allowed Amount of Concatenated: 32~128 equipments
 
Similar Product Recommend