Powder Blender Machine

Application of powder blender machine :

Powder mixing equipment called dry powder blending equipment， dry powder mixing equipment， it is widely used in chemical, plastic, rubber, food, medicine, polymer, construction, fireproof materials, and other particles, powder, liquid materials stirring, and mixing.

Technical information of powder blender machine:

Introduction of powder blender machine:

The dry powder blending equipment is under the action of the inner and outer spiral belts on the mixing shaft to turn the material within the scope of the cylinder. The inner spiral belt of the powder blender machine pushes the material from the middle to the two sides, the outer spiral belt pushes the material from the two sides to the center, and the back-and-forth infiltrated material moves and changes along the radial direction under the rotation of the spiral belt, thus forming a convection cycle. Due to the stirring of the above-mentioned movement, the materials can be quickly and uniformly mixed in a very short time, the shaft seals at both ends are specially sealed, the powder and liquid have no leakage, and the replacement cost of the sealing consumables is low, and the replacement is convenient, so dry powder mixing equipment is a widely used, adaptable Strong and effective mixing equipment.

Working principle of powder blender machine:

Double-layer spiral blades are arranged on the drive shaft of the powder blender machine, the outer blades transport the material to the middle, and the inner blades transport the material to the outer side. Under the convective movement of the double-layer spiral belt, the material forms a low-power and high-efficiency mixing environment. The material of the powder mixing equipment， dry powder blending equipment， and dry powder mixing equipment in the barrel is driven by the inner and outer diameter screws installed on the stirring shaft so that the agitator can turn the material in the maximum range in the barrel. When the stirring device is working, the inner screw drives the material near the axis to rotate, and the axial direction is pushed from the inside to both sides. The mixed materials can be uniformly mixed in a relatively short time.

Structure of powder blender machine:

This series of models are composed of a U-shaped or cylindrical barrel, frame, transmission motor, stirring knife shaft, heating/cooling device, dehumidification device, and electric control box.

Performance parameters of powder blender machine:

1. The equipment is made of different types of stainless steel such as carbon steel, SUS201, SUS304, SUS316L, etc. The material contact surface is stainless steel. The whole machine can also be customized to be made of stainless steel.

2. Multiple models of stirring capacity are optional, and there are 50-20000L capacity specifications for customers to choose

3: The interior of the barrel is polished and smooth, the blades of the powder mixing equipment are stirred without dead ends, and each batch can be mixed evenly in 5-10 minutes.

4. All stainless steel central shaft and single or double "S" shaped paddles of the dry powder blending equipment mix materials quickly and evenly;

5: The discharge port of the dry powder mixing equipment has a turn-knife type, wall-mounted type, valve, manual, automatic (pneumatic, electric) waterproof, dust-proof, and no leakage.

6. Liquid addition atomization device: Our company has a patented product that can atomize liquid materials of different viscosities so that the added liquid materials can be mixed more uniformly (spray-like).

7. The heating and drying type adopts a double-layer U-shaped barrel design, adopts a 316 stainless steel heating tube for heating, and heat-conducting oil is used as the heating medium. chemical use;

8. Refrigeration type adopts a double-layer U-shaped barrel design, usually continuous cooling with tap water, and the company's special cooling water equipment can also be used. as low as minus zero. Provide environmental protection for special material mixing.

9. The motor adopts a high-quality 99% all-copper wire motor. Cycloidal pinwheel reducer, long life, low noise; or cylindrical gear reducer, large torque. The transmission parts are linked by industrial V-belts, and the replacement of accessories is convenient and quick.

10. In addition, our company also has screw feeders, vacuum suction machines, conveyor belts, and other supporting facilities, minus the feeding platform, reducing labor intensity, and saving time and labor. Safe, fast, and convenient; there is automatic equipment such as storage barrels and automatic weighing and packaging systems at the back end.

Welcome to contact us and discuss more powder mixing equipment， dry powder blending equipment， dry powder mixing equipment!