Almond Cracking Machine

The purpose and working principle of the almond cracking machine:

This almond breaker machine is mainly used for the shelling of various nuts, such as macadamia nuts, almonds, hazelnuts, palm nuts, peach pits, Ovarian Lulu (Oligo), and other nuts. The principle of this almond breaker machine is to break the shells of nuts of different sizes by adjusting the gap between the rollers.

Technical information of almond breaker machine:

Advantages of Almond Sheller:

1. The peeling and rolling method adopt the principle of dry peeling by wooden rolling and electric sieving and classification.

2. The shelling and rolling are made of wood, and the seed damage rate is extremely low. The shell is made of an iron plate powder spraying process, which is beautiful and durable.

Features of almond cracking machine:

1. The peeling and rolling method adopt the principle of dry peeling by wooden rolling and electric sieving and classification.

2. The shelling and rolling are made of wood, and the seed damage rate is extremely low. The shell is made of an iron plate powder spraying process, which is beautiful and durable.

3. The motor voltage is 220V and the power is 2.2KW. Brａnd new copper wire motor with long life.

4. The well-designed hairdryer, with moderate wind and even distribution of wind, can effectively separate seeds and shells and optimize the seed recovery rate.

5. The shelling machine is equipped with a universal wheel and adopts a side-mounted design, which is convenient to move.

6. Small size, efficient and convenient. The peeling rate can reach more than 500 kilograms per hour, and the peeling rate is more than 98%.

Precautions for the use of the almond cracking machine:

1. Before use, check whether the fasteners are tightened, whether the rotating parts are flexible, whether there is lubricating oil in each bearing, and whether the machine should be placed on stable ground.

2. Before use, to check the power supply, the switch must be in the OFF position.

3. After the motor is started, the rotation of the rotor should be consistent with the direction indicated on the implement. Idle for a few minutes first, observe whether there is any abnormal noise, and feed it even when it is running normally.

4. The crops are fed manually and first fall into the coarse text grid. Almond shelling machine, due to the rubbing force between the rotation of the text plate and the fixed grid concave plate, the almond shelling machine model peels off the crop shell. The separated pulp and shells fall through the grid at the same time and then pass through the air duct to blow most of the shells out of the machine by the wind, while the pulp and a part of the small fruits that have not been peeled fall into the specific gravity sorting sieve. After re-screening, The pulp goes up from the separating sieve surface and flows into the sack through the feed opening, while the crops that have not been peeled go down from the sieve surface. The grid is peeled for a second time, and then it is screened and sorted by specific gravity to achieve complete peeling.

Except almond cracking machine, and shelling machine, Henan lerford Machinery Equipment Co., Ltd can provide the full production line of nut processing machines: