Almond Grinder

Application Of almond grinder:

This peanut chopping machine also called almond grinder,badam crusher machine is mainly used in food processing industry : beans, nuts (such as almonds, peanuts, walnut, hazelnut, chestnut) different particle size materials chopped,beans, nuts (such as peanuts, almonds, walnut, hazelnut, chestnut) different particle size materials chopped.

Technical parameter of almond grinder:

Introduction of Peanut chopping machine :

1. This almond grinder is used to chop the peanuts, almonds,s, and so on nuts, which pieces size can be adjusted.
2. The motor of the almond grinder adopts the frequency conversion principle, which can adjust the cutting blade's speed.
3. The blades of the almond grinder are made of high-quality high-speed steel with sharp edges and long service life.

Application of almond grinder:

This almond grinder is suitable for the nuts stuffing pre-processing for the fruit jams, bread, moon-cake cake ice cream, and so on.
The almond grinder is mainly used to cut and chop the peanuts, almonds, walnut, and fruit nuts.

Advantages of almond grinder:

1. The properties of this almond grinder are high production, equal size, low material consumption, low noise, and no oil from the chopped peanuts.
2. Multifunctional machine, not can process beans but also can process peanuts, almonds, walnut, hazelnut, chestnut, and so on nuts.
3. The chopping blades cut the materials at a certain speed, by adjusting the speed of the conveyor, the materials would be chopped into different sizes.
4. The chopped particles are selected through the vibrating screen.
5. Equipped with vibration screen, can grade the chopped granules into different levels. And the size of the mesh screen is custom-made.
6. Chopped evenly, with little powder, no oil squeezed out.

Feature Of Pistachio Chopping Machine, almond grinder:
The Hazelnut Cutting And Chopping Machine is an almond grinder with high production, equal size, low material consumption, low noise, and no oil from the chopped peanuts.

How to Operating the Stainless Steel Walnut Crusher:

1. Before starting the machine, check whether the line is normal and whether the rotating parts are loose or abnormal.

2. Before the peanuts are loaded, first remove the red skin with the matching equipment (peeling machine or half-granule machine) and use the white rice as the cutting material.

3. The upper hopper gate is controlled to the appropriate height to make the feed control evenly synchronized to ensure the normal operation of the shredder.

4. By adjusting the connecting rods at both ends of the cutter holder, the cutter is parallel to the bottom plate of the belt, the gap is adjusted, and the belt cannot be cut.

5. The size of the cut pellets is controlled by the speed of the conveyor belt according to the requirements of the user. The belt speed is fast and the particles are small, and the belt speed is slow, the particles are small.

6. After chopping, enter the vibrating grading sieve. The qualified granules fall into the hopper under the sieve, and the large granules are chopped twice(almond chopper machine).

Except for the almond grinder, our company also has a full line of nut processing machines, welcome to contact us and discuss more!