Peanut Sheller Machine

Product advantages of peanut sheller machine:

1. This peanut sheller machine has small size, efficient and convenient. The peeling rate can reach 400--1500kg(peanut fruit) per hour, and the peeling rate is over 98%.

2. Each groundnut shell remover is equipped with three grates, which can be used for peeling peanuts of different sizes.

The voltage requirements of the peanut sheller machine and the choice of the workplace:

For a single-phase motor to work normally with an automatic peanut sheller, the voltage needs to reach its rated voltage. In rural areas, there is generally only one transformer in a village, and the households are scattered. In addition, the wires and circuits used are not very standard, resulting in insufficient voltage for users farther away from the transformer. Therefore, the workplace of a small peanut shelling machine should choose a place closer to the transformer.

Technical information of peanut sheller machine:

Advantages of peanut sheller machine:

1. This peanut sheller machine can realize peanut shelling, air delivery, and separation, and it is useful whatever for home use or industries.

2. High shelling rate,97% or more.

3. Well-designed hairdryer can blow out the peanut shell to the outlet, which enables the final product to be clean.

4. Peanut sheller machine is easy to move due to four wheels

5. This groundnut shelling machine can be used in oil processing machinery and the peanut food processing industry.

6. Peanut sheller machine is our new design peanut sheller machine and its capacity is 800kg/h.

7. Putting the peanut into the inlet, under the friction of a rubber roller, and you can see clean peanut kernels

8. Almost all kernels can keep intact without any impurities which is the biggest advantage of this peanut sheller machine

9. Peanut shelling equipment can match with a motor, gasoline, or diesel engine according to your requirement.

Repair and maintenance of peanut sheller machine:

(1) After the shelling is completed, the dust and debris in the machine should be carefully removed; for the places where the paint falls off during use, repaint the paint as required.

(2) Desoldering and cracked parts should be repaired by welding.

(3) After the drum of the shelling machine is repaired, static balance debugging should be done until the debugging is balanced.

(4) Check whether the shield cover of the shelling machine is firm, and replace the damaged ones.

(5) Complete maintenance, add enough lubricating oil to each oil filling point and lubricating point, and apply oil to prevent rust on the threads of each adjusting screw; put the shelling machine in a dry and ventilated shed, be careful not to remove Put debris on the casing to prevent deformation.

The engine can be matched with the customer’s requirement, it can be a gasoline or diesel engine.