Briquetting Machine

The raw material of briquetting machine:

The material of briquette making machine can be branches, straws, straws, peanut shells, tree trunks, cotton straws, tea seed shells, fruit shells, weeds, leaves, etc.

Description of briquetting machine:

1. The powder inside of briquette making machine is dried by a dryer to make the moisture content within 12%, and it is put into the rod making machine to be formed at high temperature and high pressure (without any additives), and then put into the carbonization furnace for carbonization, and it is finished. Finished machine-made charcoal. The material powder can also be directly carbonized into carbon powder at high temperatures in a continuous carbonization furnace.

The briquette making machine is the main equipment that uses wood chips, sawdust wood, rice husks, peanut shells, plant straws, and other carbon-containing wood materials (without any additives) to make rod-shaped solid fuels under high pressure and high-temperature conditions(wood waste briquette machine). One of the important supporting equipment. With its unique performance advantages, the sawdust charcoal machine is more and more widely used in industry, agriculture, chemical industry, metallurgy, heating, barbecue, and other fields(rice husk briquette machine).

Technical information of briquette making machine:

Introduction of briquetting machine:

Mechanism sawdust charcoal machine is supporting equipment for processing mechanism charcoal. Around us, wood, branches, miscellaneous wood, waste wood, and other wood are crushed and processed into sawdust by the mechanism sawdust charcoal machine, and the sawdust is processed into charcoal through the charcoal machine.

This briquetting machine is mainly composed of a shell, lining plate, hammer, screen, large shaft, bearing, fan, pipeline, dust removal, dust removal bag, etc.

This briquette making machine starts the motor or diesel engine, the belt transmission, drives the main engine wheel to rotate, the main engine wheel is connected with the large shaft, the hammer on the large shaft repeatedly rotates to cut the wood, and the wood is processed into sawdust after repeated rotation, and the sawdust is filtered from the screen The size of the screen can control the size of the discharge, and then the filtered sawdust is pumped into the dust removal tank by the fan through the pipeline and flows out from the dust removal bag.

Mechanism charcoal production process of briquetting machine:

1. Raw material crushing: wood, branches, bamboo, and other raw materials are crushed into sawdust by a crusher.

2. Sawdust drying: Before the sawdust is made into rods, the moisture of the raw material needs to be controlled by 12%, and the tumble dryer can achieve the drying effect once, with low power consumption and high efficiency.

3. Sawdust making rods: The dried sawdust can enter the rod making machine to start making rods. The rod making machine uses the inherent characteristics of wood raw materials to plasticize the lignin in the wood raw materials through screw extrusion under high temperature and high pressure. The fine fibers are combined to form rod-shaped fuel. The rod making machine can make mandrels with diameters of 45mm, 50mm, 55mm, etc.

4. Mandrel carbonization: The gasification type carbonization furnace is the current energy-saving charcoal carbonization equipment. The modified equipment is equipped with: a biomass gasification furnace, fan, flue gas purification system, carbonization furnace, etc., put the mandrel neatly into the carbonization tank, Then push the carbonization tank into the furnace body of the carbonization furnace. At first, it is necessary to generate gas through the biomass gasifier and put wood raw materials such as sawdust into the gasifier. After ignition, combustible gases such as carbon monoxide and hydrogen are introduced through the fan. The flue gas purification system separates tar and wood vinegar to obtain pure combustible gas, which is heated by a high-pressure fan to the carbonization furnace tank (the temperature is controlled at 500℃-600℃), and a can of finished machine-made charcoal can be carbonized in three hours. There is an independent flue gas recovery pipeline, and the flue gas generated by the mandrel during the carbonization process can also be introduced into the flue gas purification system to be purified into combustible gas so that the flue gas generated during the entire carbonization process can be recycled.