Charcoal Briquette Machine

Introduction of charcoal briquette machine:

1. Charcoal briquette machine is the main equipment in the complete set of equipment for the fuel forming section in the gas production system of ammonia fertilizer plants and gas plants. Coal rods, a new process for combustion in the gas furnace to replace the traditional process of burning lump coal and briquettes to make gas(charcoal briquette extruder machine).

2. The usage of small charcoal making machine to make coal rods can make full use of pulverized coal, no need to add lime in the production process, reduce the cost of fuel, and increase the calorific value of coal, which has high economic benefits. Carbonization drying equipment is required, no steam is required, investment is saved, and floor space is reduced. At the same time, it provides a reliable guarantee for manufacturers to use cheap pulverized coal to replace coal blocks, thereby reducing production costs(charcoal briquette making machine).

Technical information of charcoal briquette machine:

Working principle of charcoal briquette machine:

The variable pitch impeller of the small charcoal making machine pushes the pulverized coal at the rear of the cylinder forward strongly. After the pulverized coal is compressed in the barrel, it is extruded through the round hole in the front head to form a coal rod. The shape of the round hole has various shapes. , there are many shapes of coal rods. The coal rods are naturally broken by gravity during the advance!

Advantages of charcoal briquette making machine:

1. The charcoal briquette making machine adopts a hard tooth surface reducer, which is small in size and high in bearing capacity.

2. The impeller inside the coal rod extruder is designed with thickened blades. The impeller and the inner lining plate of the cylinder are made of precision casting materials, and the service life is 4-5 times longer than that of ordinary materials; the coal rod outlet at the head of the machine is made of replaceable alloy steel. Easy to make and replace.

3. The charcoal briquette making machine head and the barrel are in the form of articulation, which can be opened during maintenance, and the charcoal briquette machine is very convenient to replace the internal impeller and barrel lining.

Rod making machine installation and debugging of charcoal briquette machine:

1. Before installation, all parts must be cleaned, and rust appears when transported or stored for a long time, please check whether the parts are damaged.

2. Concrete the foundation according to the foundation drawing, and leave screw holes. After the concrete is solidified, hang the coal rod machine on the concrete foundation, align the screw holes, and grout the concrete twice. After the anchor screws are solidified, use a level to calibrate The machine can be tested after the machine is stable(charcoal briquette making machine).

3. Lubricate each lubricating part before the test machine, and the amount of oil is moderate. Check all bolts for looseness and tighten them. Jog the machine to see if there is any foreign object or abnormal sound. Confirm that it is correct before starting the operation. And check if the power direction is correct.

4. After the machine runs empty for 3~5 minutes, it can be put into trial production normally. The new machine should be evenly fed with moderate dryness and wetness (generally 12%~15% moisture content)(charcoal briquette machine).