Sawdust Briquette Maker

Application of sawdust briquette maker:

As the need for a pollution-free environment, sawdust briquette maker has a large scope of marketing. The briquettes can be used as a substitute for any fuel in the following fields :

Boilers: It can be used in the boilers of Paper Mills, Sugar Mills, Dyeing houses, leather, lamination industries, Vanaspati units, Food Processing Units, Oil Extraction Units, Solvent Extraction Plant, and many other plants and industries(agro-waste briquetting machine).

Furnace & Foundries: It can be used for metal heating & melting (where the melting point is less than 1000d/cel.)

Brick Kilns: It is the total, substitute for steam coal.

Residential & Commercial Heating: For winter heating in Cold areas and Hotels, Canteens, Cafeterias and household kitchen appliances, etc(wood chip briquette maker).

Technical information of sawdust briquette maker:

Introduction to the production process of mechanism charcoal equipment, sawdust briquette maker:

1. Raw material preparation stage: (optional equipment: sawdust pulverizer)

The raw materials for the production mechanism of charcoal come from a wide range of sources and varieties, such as sawdust from wood processing plants(sawdust briquette making machine), wood shavings, bamboo and wood scraps, rural rice husks, peanut husks, fruit husks, cotton stalks, soybean stalks, hemp stalks, corn stalks, Corncob (cob), reed grass on the mountain, branches, etc.; process these raw materials into granules below 5mm, (some materials can be used directly as raw materials, but they need to remove debris may require a sawdust sieve).

2. Raw material drying stage: (optional equipment: sawdust dryer)

The mechanical charcoal machine is made of sawdust, branches, rice husks, bamboo chips, peanut skins, sunflower seed husks, wine dregs, bagasse, corn cob, coconut shells, coffee husks, and crop straws in the north and south. After high temperature and high-pressure plasticization, it is formed into semi-finished machine-made charcoal, which is carbonized in a carbonization furnace to become finished charcoal(sawdust briquette making machine).

The preliminarily separated raw materials are sent to the airflow dryer, where the raw materials are dried by the hot air sent from the hot blast stove, and the raw materials are separated from impurities again, and the smaller stones and bark are isolated. The dried raw materials and the generated water vapor are sucked away by the fan and sent to the cyclone separator through the pipeline to separate the water vapor and the dry material(charcoal extruder machine). The humidity of the dried wood chips is about (4%-6%), and by the action of gravity in the cyclone separator, the dried wood chips are separated from the humid air and fall into the material box.

3. Briquette making stage: (Optional equipment: sawdust briquette making machine)

The raw materials of sawdust briquette maker are sent to the rod making machine for curing and molding. The use of sawdust and crop straw to produce charcoal does not require any additives, because sawdust, straw, and other plant cells contain lignin (lignin), which will soften and liquefy at an appropriate temperature (200-300 degrees Celsius), and a certain pressure is applied to make it It is closely bonded with cellulose and mutually cemented with adjacent particles, and can be solidified and formed after cooling. The rod making machine uses this principle to extrude and solidify the biomass material.

4. Carbonization stage: This part is the chemical change part of the mechanism of carbon production(sawdust briquette making machine). (Optional equipment: carbonization furnace)