Briquette Press Machine

Application of briquette press machine:

The practical application of this series of briquette making machine is very wide, which can produce briquetting agglomeration of various materials and powders, such as lime powder, cryolite, alumina, fertilizer, metal magnesium powder, bauxite, aluminum ash, etc.; As well as non-ferrous metal industry powder, auxiliary materials, powder materials in the refractory industry, and materials with high added value are more suitable for use. The purpose of the briquetting machine is to reduce dust pollution, control capacity, return waste for use, and facilitate transportation. Briquette press machine is widely used in steel mills, lime plants, metallurgy, refractory charge, and metal powder briquetting(charcoal briquette machine).

Technical information of briquette making machine:

The specific process of the briquette press machine:

This charcoal briquette press machine can use Pulverized coal, carbon powder, or lime out of the kiln are screened, and the powder smaller than 3mm enters the high-pressure powder briquetting machine for briquette. We remind that the size of the ball is 35mm*25mm*15mm (length*width*thickness), the briquette press machine can also be customized according to the requirements of the buyer, and the bulk density of the ball block is 1.9-2.2g/cm³, and the falling strength is equivalent to that of the block lime. After the balls are pressed, the qualified balls enter the finished product warehouse for smelting(charcoal briquette maker).

The working principle of the briquette press machine:

The structural principle of briquette press machine is the main motor: through the v-belt, it is transmitted to the reducer, the reducer is connected to the coupling, and then transmitted to the driving shaft and then a pair of open gears to ensure the synchronization of the two roller shafts (reverse at constant speed) Among them, the piston of the hydraulic cylinder of the passive roller is held up (the constant pressure type is held up by the inclined iron), the system pressure is ensured by the hydraulic circuit(charcoal briquette press), the hydraulic control valve and the accumulator, and the material is evenly entered into the hopper of the forming machine from the storage bin through the quantitative charcoal extruder. Through the adjustment of the adjusting gate on the hopper, the material can enter the middle of the counter rollers evenly, and the unit molding pressure of the counter-roller running at the same speed and reversed to compress the material increases from small to large, and the forming pressure reaches the maximum at the center of the counter-roller. After the material passes through the line, the molding pressure decreases rapidly, so that the material enters the ball-off state, and the ball-off is smooth(charcoal briquette press).

Precautions for the use of the briquette press machine:

Before starting the hydraulic briquetting machine, the pipeline should be laid in strict accordance with the electrical specifications, and the strong and weak signal lines should be isolated and laid to avoid interference. In the outdoor open environment, independent external lightning protection measures should be taken(coal press machine). The dome itself should also be well-grounded to prevent the accumulation of static electricity from affecting the dome. When installing, hydraulic briquetting machine is necessary to correctly connect the power cable, communication cable, and video cable. When connecting, carefully refer to the requirements of our installation instructions to confirm the communication mode and corresponding pin definitions. General equipment should be installed in the later stage of construction to avoid a large amount of dust on the construction site from entering the ball machine, which directly affects its use effect and life.

Pre-sale service of briquette press machine:

Accept customer consultation, determine the scale of operation according to customer needs, and provide factory construction plans of hydraulic briquetting machine;

Provide customers with project design, process design, formulation of equipment purchase plans suitable for you, and provide customers with relevant technical documents in a timely manner; design and manufacture products according to your special needs, and train technical operators for preliminary design and construction.

On sale service of briquette press machine:

The company sent technicians to the site to guide the equipment installation, commissioning site, and training operators

24 hours a day telephone service, as usual on holidays.

After-sales service commitment of briquette press machine:

When customers encounter difficult problems during the use of the equipment or the equipment is in an abnormal state, they can seek technical support and assistance from the company by telephone or fax. After confirming the customer's service request, the company will arrange technical personnel to help the demander to troubleshoot the equipment by telephone within the specified time (that is, the response time).

If the fault phenomenon cannot be diagnosed and solved by telephone, technicians will be dispatched to the scene immediately to deal with it, and finally, solve it.

The briquette press machine provides "three guarantees"

One-year warranty and lifetime maintenance; 24-hour technical consultation to provide customers with technical diagnosis; maintenance personnel are quickly in place after receiving the fault notification to eliminate faults; assist users in system upgrades, equipment, and mold updates.