Biomass Briquette Machine

Advantages of biomass briquette machine:

1. After the biomass pellet machine is remodeled, Make its two ends consistent with the line speed of the inner and outer rings of the die plate, and there is no dislocation friction between the wheel and the die, which reduces the resistance, increases the pressure of the pressing surface, improves the extrusion force of the particles, and improves the density of the particles. Increased productivity. The kinetic energy loss is reduced and the service life of the mold is extended, which is a major difference from similar compression molding equipment. The shell of the biomass pellet machine is made of ductile iron, and the main shaft pressure roller shaft is modulated and then machined. It has high strength, and good stability, and is not easy to deform. The mold and pressure roller are made of alloy steel, and the carburizing heat treatment process is used to improve the service life(biomass briquette making machine).

2. The biomass pellet machine adopts the screw center pressure regulating mechanism, and the mold gap increases with the size, which is suitable for different materials to ensure the pressing effect. Good stability, high output, low power consumption, low price, simple operation, and convenient movement. Non-electric facilities can be replaced by diesel engines.

3. The large groove width of the pressing wheel body of the biomass pellet machine is suitable for bearing pressure and wear resistance. Bio briquette machine is well known that the compression molding of wood chips and straw requires a lot of pressure. In the same kind of pelletizing, briquetting, and rod-making equipment, the pressing wheel part is the central part of the whole equipment. The advantage of the "conical wheel flat die" that the pressure roller can be arbitrarily enlarged is incomparable with other equipment [for example, the ring model granulator is limited by the diameter of the ring die, and the pressure roller cannot be enlarged, resulting in the change of the pressure roller bearing chamber. Small, the assembled bearing does not have a strong ability to withstａnd pressure, and the damage to the bearing leads to the disadvantages of three stops and two breaks of the biomass briquette plant.

Technical information of biomass briquette machine:

Instructions for use of biomass briquette making machine:

1. Workers wear tight work clothes, do not open cuffs, do not wear gloves, wear protective caps and dust masks, and must concentrate when operating.

2. Check the oil level of the reducer, the oil level of the main shaft bearing, and the roller bearing of the flat die sawdust pellet machine.

3. Familiar with the working principle of the biomass briquette machine and the structure and function of each part.

4. Check whether there is debris in the biomass briquette plant and whether the screws are loose, adjust the spindle nut with a wrench and lock it.

5. The motor of the biomass briquette making machine must be started with no load before it can work. It is strictly forbidden to invert the direction(making sawdust briquettes).

6. It is strictly forbidden to open the door of the machine at will during the production process, and do not reach into the granulation room with your hands.

7. The biomass briquette plant must be grounded safely. When checking the machine, disconnect the main power first.

8. When working, check and remove the metal on the magnetic separator at the entrance at any time, pay close attention to the working conditions, and shut down in time if any abnormality is found.

9. The main shaft bearing of the biomass briquette making machine should be added with high-temperature grease at least once per shift, and the pressure roller bearing should be added with high-temperature grease at least twice a day.

10. When the biomass briquette machine is not used for a long time, the material in the die should be thrown out and rubbed with anti-rust oil.