Briquette Machine

Introduction of briquette machine:

Briquette machine is the main equipment in the complete set of equipment for the fuel forming section in the gas production system of ammonia fertilizer plants and gas plants. Coal rods, a new process for combustion in the gas furnace to replace the traditional process of burning lump coal and briquettes to make gas(charcoal carbonization machine).

1. The use of charcoal briquette machine to make coal rods can make full use of pulverized coal, no need to add lime in the production process, reduce the cost of fuel, and increase the calorific value of coal, which has high economic benefits(bamboo charcoal machine).

2. After this briquette machine, Carbonization drying equipment(coconut charcoal machine) is required. At the same time,briquette maker provides a reliable guarantee for manufacturers to use cheap pulverized coal to replace coal blocks, thereby reducing production costs.

Technical information of briquette machine:

Application of briquette maker:

This briquette machine is an environmental-friendly equipment, making full use of and pressing coal/charcoal powder and any agro-wastes(≤ 3mm) into coal/charcoal sticks burning without smoke. Shapes of final products can be round, square, hexagon, quincunx, and so on. The diameter produced by this model is 30-40mm. You can decide about how long the sticks should be. Advantages of our machine: High efficiency, energy-saving, environmental protection, make full use of some materials, thus bringing big economic efficiency! 

What kind of materials can be used for this briquette machine:
1. Coal/charcoal powder from coal ash, coal mud, coke powder, coking coal, and other kinds of coal and charcoal. If the size of these materials is too big, you need to crush them into less than 3mm. If your raw materials have a big size, it is difficult to press and shape in the process of making sticks.
2. Any kind of agro-wastes: Such as rice husks, crop stalks, wheat brans, groundnut shells, paddy straw, coffee shells, palm shells, sunflower stalks, cotton stalks, and so on! Of course, sawdust and any kind of wood chips can also be used! (to use these materials, materials need to be carbonized with a coconut shell charcoal machine first! ) 

Working principle and working process of this briquette maker:
1. The motor transmits the power to the transmission through the belt;
2. At the same time, the transmission output shaft transmits power to the propeller through the floating coupling;
3. Then the thruster of the propeller pushes forward coal powder through the forming die to produce high-density coal/charcoal sticks! 

Working process of briquette machine:
Choose your raw materials like coal/charcoal powder or any agro-wastes(need to be carbonized firstly)— Crush them into powder form(≤ 3mm)— Put them into the machine and press with certain molds— Get your ideal sticks. 

As for other models of our briquette making machine:
Please note: If you are not satisfied with this model briquette making machine about its capacity, we also have another model WSMB-180 with a large capacity for you to choose from. If you need, please contact me!

Advantages of briquette machine:

1. The briquette making machine adopts a hard tooth surface reducer, which is small in size and high in bearing capacity.

2. The impeller inside the coal rod extruder is designed with thickened blades. The impeller and the inner lining plate of the cylinder are made of precision casting materials, and the service life is 4-5 times longer than that of ordinary materials; the coal rod outlet at the head of the machine is made of replaceable alloy steel. Easy to make and replace.

3. The briquette machine head and the barrel are in the form of articulation, which can be opened during maintenance, and it is very convenient to replace the internal impeller and barrel lining.

Installation and debugging of briquette machine:

1. Before installation, all parts are cleaned, and rust appears when transported or stored for a long time, and check whether the parts are damaged.

2. Concrete the foundation according to the foundation drawing, and leave screw holes. After the concrete is solidified, hang the briquette making machine on the concrete foundation, align the screw holes, and grout the concrete twice. After the anchor screws are solidified, use a level to calibrate The machine can be tested after the briquette machine is stable.

3. Lubricate each lubricating part before the test machine, and the amount of oil is moderate. Check all bolts for looseness and tighten them. Jog the charcoal briquette machine to see if there is any foreign object or abnormal sound. Confirm that it is correct before starting the operation. And check if the power direction is correct.

4. After the machine runs empty for 3~5 minutes, it can be put into trial production normally. The new machine should be evenly fed with moderate dry and wet (generally 12%~15% moisture content).