Small Farm Feed Grinder

Application of small farm feed grinder:

A small farm feed grinder is suitable for crushing sawdust, shavings, branches, wood chips and various crop straws, corn straws, cotton stalk, rice husk, peanut husk, sweet potato seedling, grain straw, wheat straw and grain, bean cake, bran, etc. concentrate. A small farm feed grinder is an ideal, effective and economical equipment for farmers and sideline processing households. At the same time in the chemical industry, dyes, coatings, plastics, metallurgy, ceramics, food, and non-metallic mining industries also have uses(corn grinder for cattle).

Working principle of small farm feed grinder:

The material is transported by the feeding device to the crushing cavity of the main machine, and the material and the high-speed rotating device and particles impact, collide, rub, shear, and squeeze each other to achieve crushing. The pulverized material is separated from coarse and fine powder by the grading wheel, and the coarse powder flows into the pulverizing cavity for grinding again, and the purified gas is discharged by the induced draft fan(grinding hay for cows).

Technical information of small farm feed grinder:

Description of small farm feed grinder:

1. It has the characteristics of reasonable structure, easy installation, convenient operation, low vibration, strong versatility, high productivity, safe use, etc. It can crush various raw materials, such as corn, sorghum, wheat straw, bean straw, corn straw, straw, Peanut seedlings, sweet potato seedlings, peanut skins, dried weeds, corn, sorghum, dried sweet potatoes, broken bean cakes, and other various grains and dry materials, as well as coarsely crushed cakes, etc. Enterprises and breeders process various livestock and poultry aquatic feeds(grinder for cattle feed).

2. The equipment can be matched with a motor, diesel engine, or tractor. The main machine is composed of a feeding mechanism, guillotine mechanism, wire kneading, and crushing mechanism, bagging mechanism, transmission mechanism, traveling mechanism, protective device, and frame. The grinder mixer for cattle feed has the characteristics of reasonable structure, convenient movement, and automatic feeding. It will not explode the casing due to iron, stone, and sundries entering the machine by mistake, and it is integrated with the power assembly, which is convenient for flow processing(grinding feed for cattle).

Performance advantages and characteristics of small farm feed grinder:

The superfine mechanical small farm feed grinder is a new type of mechanical pulverization equipment independently developed by our company.

1. Low energy consumption: small farm feed grinder integrates centrifugal crushing, impact crushing, and extrusion crushing, which saves energy by 40-50% compared with other types of mechanical crushers.

2. High fineness: Equipped with a self-split classification system, the product fineness is ≥2500 mesh.

3. The feeding range is large: the feeding particle size is less than or equal to 50mm, and the material only needs to pass through the first-level rough crushing equipment(cattle grinder).

Instructions for using of small farm feed grinder:

1. For the long-term operation of the small farm feed grinder, it should be fixed on the cement foundation. If the working location is changed frequently, the small farm feed grinder and the motor should be installed on the frame made of angle iron. If the machine is powered by diesel, the power of the two should be matched, that is, the power of the diesel engine is slightly larger than that of the small farm feed grinder, and the power of the two should be matched. The grooves of the pulley are the same, and the outer end face of the pulley is on the same plane.

2. After the crusher is installed, check the fastening of each fastener and tighten it if it is loose.

3. Check whether the tightness of the belt is appropriate and whether the motor shaft and the grinder machine for the cattle feed shaft are parallel.

4. Before starting the cattle feed grinder, first turn the rotor by hａnd to check whether the claws, hammers, and the rotor operate flexibly and reliably, whether there is any collision in the shell, and whether the rotation direction of the rotor is consistent with the direction indicated by the arrow on the machine, and whether the motor is connected to the cattle feed grinder. Whether the machine lubrication is good.

5. Do not replace the pulley casually, to prevent the crushing chamber from exploding due to too high rotation speed, or the working efficiency being affected if the rotation speed is too low.

6. After the crushing table is started, it will idle for 2 to 3 minutes, and then start feeding work if there is no abnormal phenomenon.

7. Pay attention to the operation of the livestock feed grinder at any time during the work, and the feeding should be uniform to avoid blocking the boring car and not run overloaded for a long time. If it is found that there is vibration, noise, high temperature of bearing and body, material spraying out, etc., it should be stopped immediately for inspection, and the work can be continued after troubleshooting.

8. The crushed materials should be carefully checked to avoid accidents such as copper, iron, stones and other hard objects entering the crushing chamber.

9. The operator should not wear gloves and should stａnd on the side of the grinder when feeding to prevent the rebound debris from hurting the face.

Welcome to contact us and discuss more!